MATERIAL SAFETY DATA SHEET
Page 1 of 5
Ultima Clean and Refresh
1. Product And Company Identification
Supplier Manufacturer
Advantis Technologies, Inc. Advantis Technologies, Inc.
1400 Bluegrass Lakes Parkway 1400 Bluegrass Lakes Parkway
Alpharetta, GA 30004 United States Alpharetta, GA 30004 United States
Telephone Number: (770) 521-5999 Telephone Number: (770) 521-5999
FAX Number: (770) 521-5959 FAX Number: (770) 521-5959
Web Site: www.poolspacare.com Web Site: www.poolspacare.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC - DAY OR NIGHT: (800) 424-9300 CHEMTREC - DAY OR NIGHT: (800) 424-9300
Issue Date: 09/13/2004
Product Name: Ultima Clean and Refresh
Chemical Name: Acid surfactant cleaner
Chemical Family: Acid
Chemical Formula: Proprietary Mixture
MSDS Number: 326
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
CITRICACID 77-92-9
SODIUMBISULFATE 7681-38-1
SODIUMCHLORIDE 7647-14-5
Ingredients listed in this section have been determined to be hazardous as defined in 29CFR 1910.1200. Materials
determined to be health hazards are listed if they comprise 1% or more of the composition. Materials identified as
carcinogens are listed if they comprise 0.1% or more of the composition. Information on proprietary materials is available in
29CFR 1910.1200(i)(1).
EMERGENCY OVERVIEW
Corrosive to eyes skin and respiatory tract.
Hazards Identification (Pictograms)
3. Hazards Identification
Primary Routes(s) Of Entry
Skin Contact
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause skin irritation.
MATERIAL SAFETY DATA SHEET Page 2 of 5
Ultima Clean and Refresh
3. Hazards Identification - Continued
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
May cause respiratory tract irritation.
Signs And Symptoms
Irritation of Eyes, Skin and Respiratory Passages
First Aid (Pictograms)
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Call a
physician or a poison control center immediately.
Skin
In case of contact, immediately flush skin with soap and plenty of water. Remove contaminated clothing and shoes.
Ingestion
DO NOT INDUCE VOMITING. Call a physician or a poison control center immediately. If victim is fully conscious,
give one or two cups of water or milk to drink.
Inhalation
If breathing is difficult, give oxygen. If inhaled, remove to fresh air.
Fire Fighting (Pictograms)
5. Fire Fighting Measures
Flash Point: N/A 掳F
Fire And Explosion Hazards
At temperatures over 806F (430C), product will decompose generating oxides of sulfur.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire.
Fire Fighting Instructions
Product readily dissolves in water to form a weak acid solution. If using water, wear protective equipment. No gases
or toxic fumes are emitted from this reaction. However, if elevated temperatures (>806F) are reached, firefighters
should wear self-contained breathing apparatus and full protective gear. Water can be used to cool and protect
exposed material.
6. Accidental Release Measures
Clean up spill immediately. Neutralize spill area with soda ash or lime. Flush spill area with water. Use appropriate
containers to avoid environmental contamination.
MATERIAL SAFETY DATA SHEET Page 3 of 5
Ultima Clean and Refresh
Handling & Storage (Pictograms)
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store material in a cool and dry place. Keep containers tightly closed.
Handling Precautions
Use only with adequate personal protection.
Storage Precautions
Store in a cool dry place.
Work/Hygienic Practices
Use safe chemical handling procedures suitable for the hazards presended by this material.
Avoid contact with eyes. Solutions of this material are acidic and strongly irritating. Will attack most metals.
Protective Clothing (Pictograms)
8. Exposure Controls/Personal Protection
Engineering Controls
Local exhaust acceptable. Special exhaust not required
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Chemical-resistant gloves.
Respiratory Protection
None normally required.
9. Physical And Chemical Properties
Appearance
White Granular
Odor
Slightly Acidic
Chemical Type: Mixture
Physical State: Solid
Melting Point: n/a 掳F
Specific Gravity: 1.274
Molecular Weight: NOT DETERMINED
Percent Volitales: NOT DETERMINED
Vapor Pressure: NOT DETERMINED
pH Factor: 2.0 At a Concentration Of 1% solution in water
10. Stability And Reactivity
Sta bility: Stable
Hazardous Polymerization: Will not occur.
MATERIAL SAFETY DATA SHEET Page 4 of 5
Ultima Clean and Refresh
10. Stability And Reactivity - Continued
Conditions To Avoid (Stability)
Do not store dry product where exposed to moist conditions.
Incompatible Materials
Oxidizers, Cyanides, Sulfides, Strong Alkaline or caustic material.
Hazardous Decomposition Products
Only if heated over 806F (430C), at which sulfur dioxide and sulfur trioxide are formed.
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations.
14. Transport Information
Proper Shipping Name
NOT REGULATED
Hazard Class
NOT REGULATED
DOT Identification Number
NONE
15. Regulatory Information
Ingredient(s) - State Regulations
SODIUM BISULFATE
New Jersey - Workplace Hazard
New Jersey - Special Hazard
New York City - Hazardous Substance
NFPA HMIS
HEALTH 1
0
FLAMMABILITY 0
1 1
REACTIVITY 1
B
PERSONAL PROTECTION
16. Other Information
Revision/Preparer Information
MSDS Preparer: JHW
This MSDS Superceeds A Previous MSDS Dated: 05/05/2004
Disclaimer
Although reasonable care has been taken in the preparation of this document, we extend no warranties
and make no representations as to the accuracy or completeness of the information contained therein,
and assume no responsibility regarding the suitablility of this information for the user's intended purposes
or for the consequences of its use. Each individual should make a determination as to the suitability of
the information for their particular purposes(s).
MATERIAL SAFETY DATA SHEET Page 5 of 5
Ultima Clean and Refresh
Disclaimer - Continued
Advantis Technologies, Inc.
Printed Using MSDS Generator鈩? 2000
|