ProTeam®

HAVILAND CONSUMER PRODUCTS, INC.

421 Ann Street NW, Grand Rapids, MI 49504                              MATERIAL SAFETY DATA SHEET

INFORMATION ON THIS FORM IS FURNISHED SOLELY FOR THE PURPOSE OF COMPLIANCE WITH THE OCCUPATIONAL SAFETY AND HEALTH

ACT OF 1970 AND SHALL NOT BE USED FOR ANY OTHER PURPOSE USE OR DISSEMINATION OF ALL OR ANY PART OF THIS INFORMATION FOR

ANY OTHER PURPOSE MAY RESULT IN A VIOLATION OF LAW OR CONSTITUTE GROUNDS FOR LEGAL ACTION

                                                      SECTION I



MANUFACTURER’S NAME                                                    EMERGENCY TELEPHONE

HAVILAND CONSUMER PRODUCTS, INC.                                       CHEMTREC 1-800-424-9300



TRADE NAME AND SYNONYMS

       ProTeam® POLYQUAT 60





CHEMICAL NAME AND SYNONYMS

      POLY [OXYETHYLENE (DIMETHYLIMINO) ETHYLENE (DIMETHYLIMINO) ETHYLENE DICHLORIDE]





CHEMICAL FAMILY                                                FORMULA

      POLYAMINE                                                PROPRIETARY



                       SECTION II � HAZARDOUS INGREDIENTS/IDENTITY INFORMATION



COMPONENT                                                      HAZARD DATA

POLY [OXYETHYLENE (DIMETHYLIMINIO)             60%             HARMFUL IF SWALLOWED

ETHYLENE (DIMETHYLIMINO) ETHYLENE

DICHLORIDE]

INERT INGREDIENTS                              40%             (PEL OSHA PPM) NOT ESTABLISHED





                            SECTION III � PHYSICAL/CHEMICAL CHARACTERISTICS



BOILING POINT                                          SPECIFIC GRAVITY (H20-1)

ABOVE 212°F                                            1.15



VAPOR PRESSURE (MM Hg.)                                VAPOR DENSITY (AIR=1)

NOT ESTABLISHED                                        NOT ESTABLISHED



SOLUBILITY IN WATER                                    MELTING POINT

COMPLETELY                                             N/A



APPEARANCE AND ODOR                                    EVAPORATION RATE

CLEAR, PALE YELLOW LIQUID, MILD ODOR                   (BUTYL ACETATE=1) NOT ESTABLISHED



                                  SECTION IV � FIRE AND EXPLOSION HAZARDS

FLASH POINT (METHOD USED)                              FLAMMABLE LIMITS

NONE                                                   NOT ESTABLISHED



EXTINGUISING MEDIA

WATER, FOAM, CARBON DIOXIDE, DRY CHEMICAL. WATER SHOULD BE USED TO COOL SURROUNDING CONTAINERS



SPECIAL FIRE FIGHTING PROCEDURES

NONE



UNUSUAL FIRE AND EXPLOSION HAZARDS

N/A



                                       SECTION V � HEALTH HAZARD DATA

THRESHOLD LIMIT VALUE � NOT ESTABLISHED

TOXICITY � ORAL LD50: MALE:1951 MG/KG, FEMALE: 2587 MG/KG � DERMAL LD50: >2000 MG/KG- INHALATION LC50: 2.9 MG/L

ROUTES OF ENTRY � INHALATION, EYE CONTACT, SKIN CONTACT, INGESTION





EFFECTS OF OVER-EXPOSURE � EYE: MILD IRRITANT, EFFECTS MAY RANGE FROM NONE TO MILD, DEPENDING ON THE

LENGTH OF EXPOSURE. SKIN: NON-IRRITATING TO THE SKIN. INHALATION: MAY CAUSE IRRITATION OR CORROSION OF

MUCOUS MEMBRANES AND THE LUNGS. INGESTION: INGESTION IS NOT EXPECTED TO BE A PRIMARY ROUTE OF EXPOSURE.





EMERGENCY AND FIRST AID PROCEDURES � EYES: FLUSH WITH WATER FOR 15 MINUTES, SEEK MEDICAL ATTENTION.

SKIN: WASH WITH SOAP AND WATER, SEEK MEDICAL ATTENTION IF IRRITATION OCCURS. INHALATION: REMOVE TO FRESH

AIR, SEEK MEDICAL ATTENTION. INGESTION: DO NOT INDUCE VOMITING, GIVE ONE TO TWO GLASSES OF WATER OR MILK,

SEEK MEDICAL ATTENTION.



                                      SECTION VI � REACTIVITY DATA

STABILITY                                                 CONDITIONS TO AVOID

STABLE UNDER ORDINARY CONDITIONS                          NONE



INCOMPATIBILITY

ANIONIC POLYMERS



HAZARDOUS DECOMPOSITION PRODUCTS

UNKNOWN, BUT CARBON MONOXIDE MAY BE RELEASED ON BURNING.



HAZARDOUS POLYMERIZATION

NOT ESTABLISHED



                             SECTION VII � PRECAUTIONS FOR SAFE HANDLING



STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED � INITIALLY MINIMIZE AREA AFFECTED BY BLOCKING

ANY POTENTIAL ROUTES TO WATER SYSTEM. RECOVER AS MUCH OF THE PURE PRODUCT AS POSSIBLE. SPILL OR LEAK

RESIDUALS MAY HAVE TO BE COLLECTED AND DISPOSED OF. CLAY, SOIL, OR COMERCIALLY AVAILABLE ABSORBENTS

MAY BE USED TO RECOVER ANY MATERIAL THAT CAN NOT READILY BE RECOVERED AS PURE PRODUCT.



WASTE DISPOSAL METHOD � THIS PRODUCT IS NOT SPECIFICALLY LISTED ON 40CFR 261 AS A RESOURCE CONSERVATION

AND RECOVERY ACT (RCRA) HAZARDOUS WASTE. HOWEVER, SPILL OR LEAK RESIDUALS MAY MEET THE CRITERIA OF A

CHARACTERISTIC HAZARDOUS WASTE UNDER THIS ACT. DISPOSE OF IN ACCORDANCE WITH ALL

FEDERAL, STATE AND LOCAL GUIDELINES.

                                    SECTION VIII � CONTROL MEASURES

RESPIRATORY PROTECTION

NOT REQUIRED



VENTILATION           LOCAL EXHAUST                                      SPECIAL

                      USE IF MISTING OCCURS                              NONE

                      MECHANICAL � RECOMMENDED                           OTHER - NONE



PROTECTIVE GLOVES                                                 EYE PROTECTION

WEAR RUBBER GLOVES                                                WEAR GOGGLES



OTHER PROTECTIVE EQUIPMENT

RUBBER SAFETY SHOES

                                    SECTION IX � SPECIAL PRECAUTIONS

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING � DO NOT STORE CLOSELY TO DRY CHEMICAL, PROTECT FROM

FREEZING, KEEP BOTTLE TIGHTLY CLOSED WHEN NOT IN USE.



OTHER PRECAUTIONS

NONE





THE INFORMATION SUPPLIED ABOVE IS PRESENTED IN GOOD FAITH AND HAS BEEN DERIVED FROM SOURCES BELIEVED TO BE

RELIABLE, HOWEVER, NO WARRANTY EXPRESSED OR IMPLIED IS EXTENDED REGARDING ITS ACCURACY OR THE RESULTS TO BE

OBTAINED FROM ITS USE SINCE CONDITIONS OF USE ARE BEYOND OUR CONTROL. ALL RISKS ARE ASSUMED BY THE USER