MATERIAL SAFETY DATA SHEET
FORTIFY
HMIS NFPA Personal protective equipment
Health 1 1
None / Aucune / Ninguno
Fire Hazard 0 0
Reactivity 0 0
Version Number: 1 Preparation date: 2007-04-27
1. PRODUCT AND COMPANY IDENTIFICATION
Product name: FORTIFY
MSDS #: 114660012
Product code: 114660012, 114660X, 04663
Recommended use: Floor care.
Manufacturer, importer, supplier:
US Headquarters Canadian Headquarters
JohnsonDiversey, Inc. JohnsonDiversey - Canada, Inc.
8310 16th St. 2401 Bristol Circle
Sturtevant, Wisconsin 53177-0902 Oakville, Ontario L6H 6P1
Phone: 1-888-352-2249 Phone: 1-800-668-3131
MSDS Internet Address:
www.johnsondiversey.com
Emergency telephone number: 1-800-851-7145 (Prosar); 1-651-917-6133 (Int'l Prosar); 01-800-710-3400 (M茅xico)
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
CAUTION. MAY BE MILDLY IRRITATING TO EYES. MAY BE MILDLY IRRITATING TO SKIN.
Principle routes of exposure: Eye contact. Skin contact. Inhalation.
Eye contact: May be mildly irritating to eyes.
Skin contact: May be mildly irritating to skin.
Inhalation: None
Ingestion: None known.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous components None
4. FIRST AID MEASURES
Eye contact: Flush immediately with plenty of water. If irritation develops, get medical attention.
Skin contact: Flush immediately with plenty of water. If irritation develops, get medical attention.
Inhalation: No specific first aid measures are required.
Ingestion: No specific first aid measures are required.
Aggravated Medical Conditions: None known.
5. FIRE-FIGHTING MEASURES
Suitable extinguishing media: The product is not flammable. Extinguish fire using agent suitable for surrounding fire.
Specific hazards: Not applicable
Unusual hazards: None known
Specific methods: No special methods required
Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear
Extinguishing media which must not be used for safety reasons: No information available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Use personal protective equipment
FORTIFY 1 of 3
6. ACCIDENTAL RELEASE MEASURES
Environmental precautions Clean-up methods - large spillage. Absorb spill with inert material (e.g. dry sand or earth), then place in a
and clean-up methods: chemical waste container. Use a water rinse for final clean-up.
7. HANDLING AND STORAGE
Handling:
Avoid contact with skin and eyes. FOR COMMERCIAL AND INDUSTRIAL USE ONLY.
Storage:
Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF REACH OF CHILDREN.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering measures to reduce exposure:
No special ventilation requirements. General room ventilation is adequate.
Personal Protective Equipment
Eye protection: No special requirements under normal use conditions.
Hand protection: No special requirements under normal use conditions
Skin and body protection: No special requirements under normal use conditions.
Respiratory protection: No special requirements under normal use conditions.
Hygiene measures: Handle in accordance with good industrial hygiene and safety practice.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid Bulk density: No information available
pH: 8.8 Dilution pH: No information available.
Appearance: Liquid Vapor density: No information available
Color: Opaque Off-white Evaporation Rate No information available
Odor: Mild Ammoniacal Boiling point/range: Not determined
Specific gravity: 1.02 Melting point/range: Not determined
Density: 8.51 lbs/gal Decomposition temperature: Not determined
VOC: No information available Autoignition temperature: No information available
Flash point: >200掳F >93.3掳C Partition coefficient (n-octanol/water): No information available
Solubility: Soluble Solubility in other solvents: No information available
Viscosity: No information available Elemental Phosphorus: <0.1 %P
10. STABILITY AND REACTIVITY
Stability: The product is stable.
Polymerization: Hazardous polymerization does not occur.
Hazardous decomposition products: None reasonably foreseeable.
11. TOXICOLOGICAL INFORMATION
Acute toxicity Oral LD50 estimated to be greater than 5000 mg/kg Dermal LD50 estimated to be > 2000 mg/kg
Component Information: See Section 3
Chronic toxicity: None known
Specific effects
Carcinogenic effects: None known
Mutagenic effects: None known
Reproductive toxicity: None known
Target organ effects: None known
12. ECOLOGICAL INFORMATION
Environmental Information: No data available
13. DISPOSAL CONSIDERATIONS
Waste from residues / unused products:
Dispose of according to all federal, state and local applicable regulations
FORTIFY 2 of 3
14. TRANSPORT INFORMATION
DOT/TDG: Please refer to the Bill of Lading/receiving documents for up to date shipping information
15. REGULATORY INFORMATION
International Inventories
All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL), China (IECSC).
U.S. Regulations
California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65
STATE RIGHT TO KNOW
Ingredient(s) CAS # MARTK: NJRTK: PARTK: RIRTK:
Diethylene glycol monoethyl ether 111-90-0 - - X -
Modified styrene acrylic polymers Proprietary - - - -
Water 7732-18-5 - - - -
Acrylic polymers TS* - - - -
Ethylene glycol 2-ethylhexyl ether 1559-35-9 - - - -
CERCLA/ SARA
Ingredient(s) CAS # Weight % CERCLA/SARA RQ (lbs) Section 302 TPQ (lbs) Section 313
Diethylene glycol monoethyl ether 111-90-0 1 - 5% X
Ingredient(s) CAA HAP CAA ODS CWA Priority Pollutants
Diethylene glycol monoethyl ether X
SARA 311/312 Hazard Categories
Immediate: -
Delayed: -
Fire: -
Reactivity: -
Sudden Release of Pressure: -
Canada
WHMIS hazard class: Non-controlled.
Ingredient(s) CAS # NPRI
Diethylene glycol monoethyl ether 111-90-0 X
16. OTHER INFORMATION
Reason for revision: Not applicable
Prepared by: NAPRAC
Additional advice: None
Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express
or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is responsible
to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and Local laws and
regulations.
FORTIFY 3 of 3
|