Distributed By: MSDS 078
Invensys Foxboro Foxboro Rev Date: April 2007
Foxboro, MA 02035 U.S.A. Part Number B0119NZ
1-866-746-6477 Page 1 of 3
MSDS鈥檚: Parker Super-O-Lube
DESCRIPTIVE FEATURES OF PARKER'S
SUPER O-LUBE
Date: 8/13/1998
Clear Dimethyl Siloxane Polymer
Description:
Physical Data:
Viscosity @ 77掳 F 100,000 centistokes
Flash Point: Open Cup > 620掳 F
Pour Point: -33掳 F
Specific Gravity @ 77掳 F: 0.98
Viscosity Temperature Coefficients: 0.61
Coefficient of Expansion (cc/cc/掳c): 0.00096
Refractive Index @ 77掳 F: 1.4037
Volatility (% wt. loss .24 hours @ 302掳 F): < 2%
Boiling Point: >300掳 F
Vapor Pressure: < 5 mmHg
Solubility in Water < 0.1%
Solvents: Amyl acetate, benzene, carbon tetrachloride, chlorothene NU, cyclohexane, diesel fuel,
ethylene dichloride, ethyl ether, 2-ethyl hexanol, gasoline, hexyl ether, methylene chloride, methyl ether,
mineral seal oil, naphtha VM+P, perchloroethylene, stoddard solvent, toluene, trichloroethylene, turpentine,
xylene, JP-4 jet fuel, kerosene.
Non-Solvents: Cyclohexanol, dimethylphthalate, dodecanol, Dowanol DE, Dowanol EE, ethylene
glycol, methanol, paraffin oil, propylene glycol, water.
PARKER SUPER O-LUBE
MATERIAL SAFETY DATA SHEET
Required under USDL Safety and Health Regulations for Ship Repairing,
Shipbuilding, and Shipbreaking (29 CFR 1915, 1916, 1917)
Section I
Manufacturer's Name Parker Hannifin Corp., O-Ring Division
Emergency Telephone No.(606) 269-2351
Address 2360 Palumbo Drive, PO Box 11751, Lexington, KY 40512
Trade Name and Synonyms Super O-Lube
Chemical Family Clear Polysiloxane Polymer
MSDS 078
Part Number B0119NZ
Page 2 of 3
Section II - Hazardous Ingredients
Hazardous Mixture of Other Liquids, Solids, or Gasses
None Present
NFPA (HMIS) Code: Health-1, Flammabliity-0, Reactivity-0
CAS#: 63148-62-9
Section III - Physical Data
Boiling Point (掳F) Above 300
Specific Gravity 0.98
Vapor Pressure below 5 mmHG
Percent, Volatile by Volume (%) N/A
Vapor Density (Air=1) N/A
Evaporation Weight Below 1.0
Solubility in Water Less than 0.1%
Appearance and Odor Liquid, clear and very little color
Section IV - Fire and Explosion Hazard Data
Flash Point (Method Used) 610掳(Open Cup)
Flammable Limits N/A Le : N/A Ue: N/A
Extinguishing Media Carbon dioxide, or foam
Special Fire Fighting Procedure Self contained breathing apparatus and protective cloathing
should be worn in fighting fires involving chemicals.
Unusual Fire and Explosion Hazards: None known.
Section V - Health Hazard Data
Threshold Limit Value
Effects on Overexposure May cause temporary eye discomfort due to over exposure.
Emergency & First Aid Procedure Flush with water.
D.O.T. Hazard Name/ID no.: None
RCRA Hazard Class: None
E.P.A. Priority Pollutants: None
NFPA (HMIS) Code: 115
Section VI - Reactivity Data
Stability Stable
Conditions to Avoid N/A
Incompatibility (Materials to avoid) Strong Oxidizers
Hazardous Decomposition Product Carbon Monoxide - Carbon Dioxide and various hydrocarbons.
Hazardous Polymerization Will not occur.
Section VII - Spill or Leak Procedures
Steps to be taken if material is released or spilled:
Use absorbent material to collect and contain for salvage or disposal.
Waste Disposal Method: Land fill or burn in accordance with local regulation.
MSDS 078
Part Number B0119NZ
Page 3 of 3
Section VIII - Special Protection Information
Respiratory Protection (Specify type) N/A
Ventilation Local Exhaust: N/A
Special: N/A
Mechanical: Recommended
Other: N/A
Protective Gloves Recommended.
Eye Protection Safety Glasses.
Other Protective Gear N/A
Section IX- Special Precautions
Precautions to Be taken in Handling and Storing:
Normal precautions.
Other Precautions: At elevated temperatures, this product is sensitive to
contamination. If this product becomes contaminated
with strong acids, bases, some metallic compounds, or
oxidizing agents, the flash point and viscosity may
change and should be redetermined.
The information contained herein is believed to be reliable, but no representations, guarantees, or
warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be
obtained therefrom. Nothing herein is to be considered as permission, recommendation, nor as an
inducement, to practice any patented invention without permission of the patent owner.
|