Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1310-73-2

File Name: specchemllc_com---form_seasoning_wb_msds.asp
Revised: 3/27/07                                                           Printed: 3/27/2007


MATERIAL SAFETY DATA SHEET
FORM SEASONING WB
1. COMPANY IDENTIFICATION

Manufacturer: SpecChem
444-B Richmond Ave.
Kansas City, KS 66101
Phone (866) 791-8700
24 Hour Emergency Contact: CHEMTREC (800) 424-9300

2. COMPOSITION INFORMATION

Component CAS # % by weight
Sodium Hydroxide 1310-73-2 3 鈥? 10%
Phosphate Ester / Phosphate Acid Ester N/A 3 鈥? 10%

3. HAZARDS IDENTIFICATION

Component Exposure Limit Form
Sodium Hydroxide 2 mg / m3 Liquid
Phosphate Ester / Phosphate Acid Ester N/A Liquid

NFPA CLASSIFICATION (0=Least, 1=Slight, 2=Moderate, 3=High, 4=Extreme)
Health 2, Fire 0, Reactivity 1

HMIS CODES (0=Least, 1=Slight, 2=Moderate, 3=High, 4=Extreme)
Health 2, Flammability 0, Reactivity 1

HAZARD DESCRIPTION: May be harmful if swallowed or inhaled.
May cause irritation to skin, eyes, and respiratory tract.

POTENTIAL HEALTH EFFECTS
INHALATION: No information found, but compound should be handled as a potential health
hazard. May cause irritation to the respiratory tract. Symptoms may include coughing, sore
throat, labored breathing, and chest pain.
INGESTION: No information found, but compound should be handled as a potential health
hazard. May cause irritation to the gastrointestinal tract. Symptoms may include nausea,
vomiting, and diarrhea.
SKIN CONTACT: No information found, but compound should be handled as a potential health
hazard. May cause irritation with redness and pain.
EYE CONTACT: No information found, but compound should be handled as a potential health
hazard. May cause irritation, redness, and pain.
CHRONIC EXPOSURE: No information found.
AGGRAVATION OF PRE-EXISTING CONDITIONS: No information found.


1
Revised: 3/27/07 Printed: 3/27/2007


MATERIAL SAFETY DATA SHEET
FORM SEASONING WB
4. FIRST AID PROCEDURES

EYE CONTACT: Immediately flush eyes with plenty of water for 15 minutes, lifting lower or
upper eyelids occasionally. Obtain medical attention immediately.
SKIN CONTACT: Immediately flush skin with plenty of water for at least 15 minutes. Remove
contaminated clothing and shoes. Obtain medical attention. Wash clothing before reuse.
Thoroughly clean shoes before reuse.
INHALATION: Remove to fresh air. Give artificial respiration if not breathing. Give oxygen if
breathing is difficult. Obtain medical attention.
INGESTION: Give large amounts of water to drink. Never give anything by mouth to an
unconscious person. Obtain medical attention.

5. FIRE FIGHTING MEASURES

THIS PRODUCT IS NOT EXPECTED TO BE A FIRE HAZARD.

Flash Point: No information available.
Autoignition Temperature: No information available.
Flammability Limits in air: No information available.

EXTINGUISHING MEDIA: Alcohol foam, water spray, dry chemical, carbon dioxide.
EXTINGUISHING MEDIA TO AVOID: No information available.
SPECIAL FIREFIGHTING PROCEDURES: In the event of a fire, wear full protective clothing
and NIOSH approved self-contained breathing apparatus with full facepiece operated in the
pressure demand or other positive pressure mode.
鈥淓MPTY鈥? CONTAINER WARNING: 鈥淓mpty鈥? containers retain residue (liquid and/or vapor)
and can be dangerous. Do not attempt to clean since residue can be difficult to remove.
鈥淓mpty鈥? drums should be completely drained, properly bunged and promptly returned to a drum
reconditioner. All other containers should be disposed of in an environmentally safe manner and
in accordance with governmental regulations. For work on tanks refer to OSHA, ANSI Z 49.1,
and other governmental and industrial references pertaining to cleaning, repairing, welding, or
other contemplated operations.

6. ACCIDENTAL RELEASE MEASURES

LARGE SPILLS: Evacuate the hazard area of unprotected personnel. Dike and contain with
suitable absorbent. Shut off source of leak only if it is safe to do so. Do not allow to enter
sewers or open waterways. Advise authorities if product has entered sewers, waterways, or
extensive land areas.
SMALL SPILLS: Take up with absorbent materials such as sand or sawdust and place in non-
leaking containers. Dispose of in accordance with all Federal, state, and local regulations.



2
Revised: 3/27/07 Printed: 3/27/2007


MATERIAL SAFETY DATA SHEET
FORM SEASONING WB
7. HANDLING AND STORAGE

HANDLING: For industrial use only. Avoid skin and eye contact. Minimize breathing vapor or
mist. Respiratory protection is required when ventilation is inadequate. Cleanse skin thoroughly
after contact, before breaks and meals, and at the end of a work period. Product is readily
removed from skin by waterless hand cleaners following by washing thoroughly with soap and
water.
STORAGE: Store in a cool, dry location and in accordance with good industrial practices. Keep
containers closed when not in use.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

VENTILATION: Use local exhaust to capture vapor or mists if necessary. Local exhaust is
preferred over general exhaust because it can control the emissions of the contaminant at its
source, preventing dispersions into the general work area. Provide ventilation sufficient to
prevent exceeding OSHA PELs.
RESPIRATORY PROTECTION: For emergencies, or instances where the exposure levels are
not known, use a full-facepiece positive-pressure, air-supplied respirator.
SKIN PROTECTION: Wear impervious protective clothing, including gloves, boots, lab coat,
apron, or coveralls, as appropriate to prevent skin contact.
EYE PROTECTION: Use chemical safety goggles and/or a full face shield where splashing is
possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE: Clear to hazy liquid SPECIFIC GRAVITY: 1.03
ODOR: Negligible pH: 13
BOILING POINT: 100oC POUR POINT: 0oC
VAPOR PRESSURE: No information available.
VAPOR DENSITY: No information available.
SOLUBILITY IN WATER: 100%

10. STABILITY AND REACTIVITY

STABILITY: Stable.
CONDITIONS TO AVOID: Incompatibles.
MATERIALS TO AVOID: Strong acids.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon dioxide and carbon monoxide may
form when heated to decomposition.
HAZARDOUS POLYMERIZATION: Will not occur.




3
Revised: 3/27/07 Printed: 3/27/2007


MATERIAL SAFETY DATA SHEET
FORM SEASONING WB
11. TOXICOLOGICAL INFORMATION

No LD50/LC50 information is available relating to normal routes of occupational exposure.

EYE EFFECTS: May cause irritation, redness, and pain.
SKIN EFFECTS: May cause irritation with redness and pain.
ORAL EFFECTS: May cause irritation to the gastrointestinal tract. Symptoms may include
nausea, vomiting, and diarrhea.
INHALATION EFFECTS: May cause irritation to the respiratory tract. Symptoms may include
coughing, sore throat, labored breathing, and chest pain.

12. ECOLOGICAL INFORMATION

ENVIRONMENTAL FATE: No information available.
ECOTOXICITY: No information available.
FURTHER INFORMATION: None.

13. DISPOSAL CONSIDERATIONS

When disposed of properly, this product does not meet RCRA classification or listing for
hazardous waste. Dispose in accordance with all applicable Federal, state, provincial, and local
environmental regulations. Empty containers should be recycled or disposed of through an
approved waste management facility.

Disposal methods identified are for the product as sold. For proper disposal of used material, an
assessment must be completed to determine the proper and permissible waste management
options permissible under applicable rules, regulations and/or laws governing your location.

14. TRANSPORT INFORMATION

SHIPPING NAME: Corrosive Liquid N.O.S. (contains sodium hydroxide) UN 1824 PGII
Warnings and Placards required when shipping more than 1000 lbs per container.




4
Revised: 3/27/07 Printed: 3/27/2007


MATERIAL SAFETY DATA SHEET
FORM SEASONING WB
15. REGULATORY INFORMATION

FEDERAL/NATIONAL
This product is not hazardous as defined by the OSHA Hazard Communication Standard, 29
CFR 1910.1200.

SUPERFUND AMENDMENTS AND REAUTHORIAZATION ACT OF 1986 (SARA) TITLE
III (Emergency Planning and Community Right to Know Act) SECTION 313

This product contains the following substances subject to the reporting requirements of Section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part
372:
NONE

TOXIC SUBSTANCES CONTROL ACT (TSCA)
All components of this product are on the TSCA Inventory or are exempt from the TSCA
Inventory requirements.

16. OTHER INFORMATION

Prepared by: Thomas F. Stalnaker



The information and recommendations contained herein were obtained from sources we believe
to be accurate and reliable as of the date revised. However, SpecChem does not warrant or
guarantee their accuracy or reliability, and shall not be liable for any loss or damage arising out
of the use thereof. The information and recommendations are offered for the user's consideration
and examination and it is the user's responsibility to satisfy itself that they are suitable and
complete for its particular use.




5

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
specchemllc_com---form_seasoning_wb_msds.asp 1310-73-2
specchemllc_com---pavecure_cw_msds.asp N/A
specchemllc_com---pave_cure_ww_msds.asp N/A
specchemllc_com---poly_cure_msds.asp 8052-41-3
specchemllc_com---precast_patch_msds.asp 65997-15-1 14808-60-7
specchemllc_com---quartz_floor_hardener_msds.asp 65997-15-1 7631-89-9 65997-16-2 13397-24-5
specchemllc_com---repcon_928_msds.asp 65997-15-1 14808-60-7
specchemllc_com---repcon_h_msds.asp 65997-15-1 14808-60-7
specchemllc_com---repcon_vo_msds.asp 65997-15-1 14808-60-7
specchemllc_com---sc_foundation_coating_msds.asp 65997-15-1 7631-89-9 65997-16-2 13397-24-5
specchemllc_com---sc_metallic_grout_msds.asp 65997-15-1 7631-89-9 65997-16-2 13397-24-5
specchemllc_com---speccrete_msds.asp 65997-15-1 14808-60-7
specchemllc_com---specflex_msds.asp 8052-42-4 8002-74-2 10043-01-3
specchemllc_com---specpoxy_1000_msds.asp 25068-38-6 2461-15-6 140-31-8 90-72-2 84852-15-3
specchemllc_com---specpoxy_binder_msds.asp 25068-38-6
specchemllc_com---specpoxy_grout_msds.asp 25068-38-6
specchemllc_com---specsilane_20_wb_msds.asp N/A
specchemllc_com---specsilane_40_msds.asp 8052-41-3
specchemllc_com---specsilane_40_wb_msds.asp N/A
specchemllc_com---spec_blast_msds.asp 74-14-1 111-76-2
specchemllc_com---spec_city_white_msds.asp N/A
specchemllc_com---spec_etch_deep_msds.asp 526-95-4 9003-11-6
specchemllc_com---spec_etch_msds.asp 526-95-4
specchemllc_com---spec_film_conc_rtu_msds.asp N/A
specchemllc_com---spec_flow_msds.asp 65997-15-1 14808-60-7
specchemllc_com---spec_hard_msds.asp 1344-09-8
specchemllc_com---spec_patch_msds.asp 65997-15-1 14808-60-7
specchemllc_com---spec_plug_msds.asp 65997-15-1 14808-60-7
specchemllc_com---spec_prime_msds.asp N/A
specchemllc_com---spec_smooth_msds.asp 65997-15-1 14808-60-7
specchemllc_com---spec_strip_plus_msds.asp N/A
specchemllc_com---spec_tilt_qd_msds.asp 68410-97-9 64742-95-6 8052-41-3
specchemllc_com---spec_weld_msds.asp N/A
specchemllc_com---super_spec_plug_msds.asp 65997-15-1 14808-60-7
specchemllc_com---tri_act_msds.asp 61790-12-3
spectrumpacificproducts_com---msds.asp 57-13-6 7720-78-7 68611-64-3 77-83-2 7447-40-7 1317-65-3 7758-23-8 7783-28-0
spl-int_com---cellmax_msds_print.asp 8013-01-2
spl-int_com---dextrinase_l400_msds_print1.asp 9032-08-0
spl-int_com---dextrinase_p400_msds_print.asp 9032-08-0
spl-int_com---ethanol_tt_yeast_msds.asp N/A
spl-int_com---magnesium_sulphate_monohydrate_msds.asp 14168-73-1
spl-int_com---magnesium_sulphate_msds_print.asp 14168-73-1
spl-int_com---monopotassium_phosphate_msds_print1.asp 7778-77-0
spl-int_com---monopotassium_phosphate__mkp__msds.asp 7778-77-0
spl-int_com---multizyme_msds_print.asp 9012-54-8 62213-14-3 9025-57-4 9001-89-2 9040-76-0
spl-int_com---urea_msds.asp 57-13-6
spl-int_com---urea_msds_print1.asp 57-13-6
spl-int_com---vitayeast_msds.asp N/A
standardceramic_com---101.asp N/A
standardceramic_com---103.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC