SAFETY DATA SHEET
Date of revision : 10/04/06
Previous edition : 06/01/05
Print date : 21/12/06 Page 1
RADIANT COLOR N.V.
1. Identification of the substance/preparation and of the company/undertaking
RADGLO PC25 RED
1.1 Identification of the substance or preparation
Fluorescent pigment for the preparation of paints, printing inks and coatings.
1.2. Use of the substance/preparation
1.3. Company/undertaking identification RADIANT COLOR NV
Europark 1046
B-3530 HOUTHALEN
1.4. Emergency telephone Tel : +32 11 52 07 40 Fax : +32 11 52 66 79
E-mail : info@radiantcolor.be
Office hours: monday till friday 09h00 - 17h00
2. Composition/Information on ingredients
2.1 Chemical composition
Polycondensation resin of melamine, paraformaldehyde and toluenesulfonamide, colored with synthetic dyes. CAS no.: mixture.
2.2 Dangerous substances
<0.1 % Formaldehyde, CAS 50-00-0, EINECS 200-001-8, T, R23/24/25, R34,R40, R43
1,0% , Xanthene dye CAS 26694-69-9 , EINECS 247-906-4 , Xn , N , R22,R41,R50/53
0,5 -
1,0 - 1,5% , Xanthene dye CAS 2390-63-8 , EINECS 219-233-6 , Xn , R20/22,R41,R52/53
3. Hazards identification
3.1 Classification of the substance/preparation According to 67/548/EEC, 1999/45/EC and 2001/58/EC classified as : , R52/53
3.2 Adverse effects to human health Formaldehyde can be released upon heating
Finely divided dust may cause a dust explosion.
3.3 Environmental effects No special hazards known.
4. First aid measures
4.1 Symptoms/effects after exposure
No particular symptoms or effects known.
4.2 General information
Remove contaminated clothing
4.3 Measures after eye contact
Flush with water while holding eye lid open. Consult a physician if irritation persists.
4.4 Measures after skin contact
Wash with water and soap.
4.5.Measures after inhalation
Remove to fresh air. Treat symptoms. Consult a physician after significant exposure.
4.6 Measures after ingestion
Rinse mouth with water. Do not induce vomitting. Consult a physician after significant exposure.
SAFETY DATA SHEET
Date of revision : 10/04/06
Previous edition : 06/01/05
RADIANT COLOR N.V.
Print date : 21/12/06 2
Page
RADGLO PC25 RED
5. Fire-fighting measures
5.1 Suitable extinguishing media
Water , Watermist , Foam , Dry powder , CO2
5.2 Not suitable extuiguishing media
No special restrictions
5.3 Specific hazards
Finely divided dust may cause dust explosions. Fumes released on burning may be toxic.
5.4 Special protective equipment for fire-fighters :
Wear self-breathing apparatus in the event of fire.
5.5 Additional information
Prevent entry of extinguishing water to sewers and public waters.
Clear area of personnel in case of fire.
6. Accidental release measures
6.1 Personal precautions
Avoid inhalation and contact with skin and eyes. Wear recommended personal protective equipment. See 8.
6.2 Environmental precautions
Avoid dust formation. Do not drain in the sewer.
6.3 Methods for cleaning up
Sweep up with sand or any other absorbing material. Dispose as any dust of dirt. See 13.
7. Handling and storage
7.1 Handling
Apply good hygienic practice as employed with any industrial chemical.
Avoid dust formation. Take precautionary measures against static discharges. Provide local exhaust or general room ventilation.
7.2 Storage
Store in a dry and cool place. Keep container closed when not in use.
Keep away from oxidising agents and incompatible substances.
7.3 Specific use(s)
Formaldehyd will be released wenn the product is used at an elevated temperature. Assure proper ventilation.
8. Exposure controls/personal protection
8.1 Exposure limit values
No values determined
8.2 Exposure controls
8.2.1 Occupational exposure controls
8.2.1.1 Respiratory protection
Dust mask class 2, conform to EN 149
8.2.1.2 Hand protection
NBR Gloves conform to EN 388
8.2.1.3 Eye protection
Safety eyewear according to EN 166
8.2.1.4 Skin protection
Closed clothing
SAFETY DATA SHEET
Date of revision : 10/04/06
Previous edition : 06/01/05
RADIANT COLOR N.V.
Print date : 21/12/06 3
Page
RADGLO PC25 RED
9. Physical and chemical properties
9.1 General information
Powder
Appearance
Red
Colour
Slight formaldehyde odor
Odour
9.2 Important health, safety and environmental information
7,0-10,5 (5g in 100 cc water with wetting agent)
pH
Not applicable
Boiling point/boiling range
Not applicable
Flash point
Not applicable
Flammability
p(max) = 9 bar; (dp/dt)max = 775 bar/s; K(st) = 210 bar.m/s
Explosive properties
No reactions known
Oxidising properties
Not applicable
Vapour pressure
1.38 g/ml
Relative density
Solubility
Unsoluble
a) in water
Unsoluble
b) fat solubility
Not applicable (unsoluble in water and n-octanol)
Partition coefficient (n-octanol/water)
Not applicable
Viscosity
Not applicable
Vapour density
Not applicable (solid substance)
Evaporation rate
None
9.3 Other information
10. Stability and reactivity
Conditions to avoid
Dust formation in the vicinity of sparks/open fire. Excessive heat.
Materials to avoid
Contact with strong oxidisers.
Hazardous decomposition products
Fumes on burning contain oxides of nitrogen, sulfur and carbon.
11. Toxicological information
11.1 Acute oral toxicity LD50
>5000 mg/kg (rats)
11.2 Symptoms/effects at exposure
a) Ingestion
No specific effects known.
b) Inhalation
Treat as a nuisnace dust. Avoid breathing
c) Skin
Acute dermal toxicity (albino rats) LD50 >23 mg/kg
d) Eyes
Non irritating
11.3 Chronic effects
No effects known
11,4 Specific effects of exposure
No effects known
SAFETY DATA SHEET
Date of revision : 10/04/06
Previous edition : 06/01/05
RADIANT COLOR N.V.
Print date : 21/12/06 4
Page
RADGLO PC25 RED
12. Ecological information
12.1 Ecotoxicity
The product is insoluble in water. No negative effects to expect based on the present state of knowlegde and experience.
12.2 Mobility
Low mobility. Not soluble in water
12.3. Persistence and degradability
Difficult to degrade.
12.4. Bioaccumulative potential
No accumulation to expect because of the product is not soluble in water and n-octanol.
12.5. Other adverse effects
Product is not affecting the AOX-value of waste water. Product does not contain heavy metals.
13. Disposal considerations
13.1 Product
In accordance to local/natioanal regulations. Incineration under controlled conditions with recuperation of energy is recommended.
13.2 Packaging
In accordance to local/national regulations. Incineration under controlled conditions with recuperation of energy is recommended.
14. Transport Information
14.1 UN number
-
14.2 Class
-
14.3 Proper shipping name
-
14.4 Packing group
-
14.5 Marine pollutant
No marine pollutant
14.6 Other applicable information
Not applicable
15. Regulatory information
Classification
Labelling according to the European Directives 67/548/EEC, 1999/45/EC and 2001/58/EC:
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R52/53
Avoid release to the environment. Refer to special instructions/Safery data sheets.
S61
Other information
Water Hazard Class (Germany VwVwS, 17.05.1999): WGK 2
16. Other information
The product/preparation is registered in following national inventories:
EINECS, Europa
DSL, Canada
SAFETY DATA SHEET
Date of revision : 10/04/06
Previous edition : 06/01/05
RADIANT COLOR N.V.
Print date : 21/12/06 5
Page
RADGLO PC25 RED
AICS, Australie
MITI/ENCS, Japan
PRC, China
PICCS, Phillipines
Custom tariff number 3204 20 00
Full text of R-phrases of headings 2 and 3
Harmful by inhalation and if swallowed.
R20/22
Harmful if swallowed.
R22
Toxic by inhalation, in contact with skin and if swallowed.
R23/24/25
Causes burns.
R34
Risk of serious damage to eyes.
R41
May cause sensitization by skin contact.
R43
Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R50/53
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R52/53
Possible risk for irreversible effects
R68
Product is conform to CONEG regulation and directive 94/62/EEC
Product is conform to toy regulation EN71 Part 3
Colour index: the product not is listed in this index.
Heavy metals : As <1 ppm, Ba 2 ppm, Cd 2 ppm, Cr O.5 ppm, Hg <1 ppm, Pb 2 ppm, Sb <1 ppm, Se <10 ppm
Content of free primary aromatic amines: < 0.005%. Content of PCB and PCT: < 50 ppb
Changes/modifications versus the previous edition are marked with a vertical dash in the left margin
The information contained here in is based on our present state of knowlegde and experience. It does not reflect the needs of every situation,
neither relates to the use in combination with any other material or in any process.
Employers should use the given data as supplementary information, and should determine, independently the suitability of the product to assure
proper use, safety and health requirements
|