MATERIAL SAFETY DATA SHEET
Original Release Date: 07-19-05
Issue: 3
02-17-06
Revised Date:
Section I - Company / Product Identity
Product Identification: 52X - IBM 75P5155
(replacement cartridge for HP LaserJet ( US/EMEA PN )
4000, 4050) 鈥? (replaces HPP/N C4127X)
IBM 75P5545 ( AP PN )
HMIS Hazard Rating: NFPA Hazard Rating:
Company : Turbon International GmbH
0 = Minimal 3 = Serious 0 = Minimal 3 = Serious
Ruhrdeich 10 1 = Slight 4 = Severe 1 = Slight 4 = Extreme
D-45525 Hattingen 2 = Moderate 2 = Moderate
Germany HMIS Rating : NFPA Rating :
Telephone: +49-(0)2324-504-471 Health =0 Health =0
Fax: +49-(0)2324-504-133 Flammability = 1 Flammability = 1
Contact Person: Mr. Rob Aukema Reactivity =0 Instability =0
PPE = Section VIII Special = None
Section II - Composition / Ingredients
This product consists of new and remanufactured parts that are originally manufactured by the OEM.
The cartridge consists of light sensitive drum, toner , a developer unit and several blades.
Main components:
Plastics: PE, PP, PS, ABS, PU, Acetal, mixed with FR
Metals: Iron, Sheet steel. Some components electrolyze nickel-plated.
Non-metals: Aluminum
Foam: Expanded polyuthane, polyester base
Elastomer: Polyurethane
The toner used in this cartridge consists of the following components.
Description CAS number Percent R+S phrase Symbol
Styrene Acrylate Co-polymer 25036-16-2 43 - 53 None assigned None assigned
Magnetite 1317-61-9 40 - 50 None assigned None assigned
Polypropylene Wax 9010-79-1 0.5 - 5 None assigned None assigned
Metal-Complex Dye 104815鈥?18-1, 0.1 - 3 None assigned None assigned
115304-21-4
The drum used in this cartridge consists of the following components.
Description CAS number Percent R+S phrase Symbol
Substrate: Al-cylinder None assigned > 99% None assigned None assigned
Coating: Organic photoconductor None assigned < 1% None assigned None assigned
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Section III - Hazards Identification
Primary entry routes:
Inhalation : Slight irritation of respiratory tract, but considered a low hazard.
Ingestion: May cause irritation of the mucous membranes or digestive tract.
Skin contact: Repeated contact may cause irritation or an allergic skin reaction.
Eyes effects: May cause irritation
Chronic effects: Not known
Potential environmental hazard:
No particular hazards known. The cartridge is made in accordance with all known legal requirements.
Section IV - First Aid Measures
Inhalation: Remove person to fresh air. If symptoms persists consult a physician.
Ingestion: Rinse mouth with water and drink one or two glasses of water. If symptoms occur, call a physician.
If symptoms persists, consult a physician.
Skin contact: Wash well with soap and running water. If symptoms occur, call a physician.
Eyes contact: Immediately flush with large amounts of clean lukewarm, low pressure water for at least 15
minutes. If irritation persists, consult a physician. Remove any contact lenses to facilitate flushing.
Section V - Fire and Explosion Measures
Flash point: No data available.
Ignition temperature: No data available.
Non-flammable solid according to USA 16 CFR 1500.44 and 84/449/EC 5th adaptation.
Flammability
Flammability limits No data available.
Water, foam, CO2, dry chemicals.
Extinguishing media:
Special fire fighting procedures: To avoid inhalation of toxic fumes, wear MHSA/NIOSH approved self-contained breathing
apparatus.
Un-usual fire / explosion hazards: Toner may cause a dust explosion. Explosive limits of toner particles suspended in air are
equal to coal dust.
Section VI - Accidental Release Measures
Spill and leakage procedures: Wear personal protective equipment. Avoid breathing dust. Minimize the release of
particles. Vacuum or sweep the material into a bag or other sealed container. If a vacuum
cleaner is used, the motor must be rated as dust tight. Dispose of waste toner in
accordance with local requirements.
Environmental precautions: Do not discharge into drains.
Section VII - Handling and Storage
Advise on safe handling and protection against fire:
Keep material out of reach of children. Avoid inhalation of dust and contact with eyes. Keep away from excessive heat, sparks
and open flames.
Requirements for storage rooms and advise on storage compatibility:
Keep out of reach of children. Keep container closed and store at room temperature. Keep away from strong oxidizers.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Section VIII - Exposure Limits / Personal Protection
USA OSHA (TWA) / PEL: 15 mg/m3 (Total Dust)
5 mg/m3 (Respirable Fraction)
ACGIH (TWA / TLV) 10 mg/m3 (Inhalable Particulate)
3 mg/m3 (Respirable Particulate)
DFG (MAK) 6 mg/m3 (Dust Concentration)
In Canada, consult local authorities for acceptable provincial values.
Respiratory protection: Not required under intended use.
Ventilation: General ventilation should be sufficient under intended use.
Protective gloves: Not required under intended use.
Eye protection: Not required under intended use.
Other protective equipment: Not required under intended use.
Section IX - Physical and Chemical Properties
Boiling point: Not applicable
Melting point: 100掳 - 150掳 Celsius (softening point)
Particle size: 7 鈥? 12 um nominal
Vapor pressure: Negligible
Solubility in water: Negligible
Vapor density ( air =1 ) Not applicable
Evaporation rate: Not applicable
Color: Black
Appearance: Very fine powder
Odor: Slight plastic odor
Section X - Stability and Reactivity
Stability: Stable
Incompatibility: Strong oxidizers
Hazardous decomposition Combustion will produce carbon dioxide and possibly toxic chemicals such as carbon
products: monoxide.
Hazardous polymerization: Will not occur.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Section XI - Toxicological Information
Toxicological info according to OSHA Hazard communication standard and commission directive 67/548/EEG.
Toner: Ames test: Negative. (mutagenicity test from Prof. Ames, Berkeley University California,
USA)
Ingestion: Not toxic.
Eye contact: Not toxic.
Skin contact: Not toxic.
Chronic toxicity: No data available.
Carcinogenicity: Not carcinogenic.
Chronic health hazard comments N/A
Exposure limit: Not known.
Inhalation: Not toxic.
Drum: Ames test: Negative. (mutagenicity test from Prof. Ames, Berkeley University California,
USA)
Ingestion: Not toxic.
Eye contact: Not toxic.
Skin contact: Not toxic.
Chronic toxicity: Not toxic.
Carcinogenicity: Not known.
Chronic health hazard comments None.
Exposure limit: Not known.
Inhalation: Not toxic.
Section XII - Ecological Information
Avoid spills and dispose of in accordance with applicable laws and regulations.
Section XIII - Disposal Considerations
Observe all federal, regional, and local regulations when disposing of the product.
Contact your local Turbon dealer for returning your used and empty cartridges.
Tel: +49-(0)2324-504-471
Fax: +49-(0)2324-504-133
Section XIV - Transport Information
International transport information:
UN no.: None
UN shipping name: None
Hazards class: None
Packing group: None
Special precautions: None
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Section XV - Other Information
New components are purchased from international reputable producers. The information in this MSDS is based on our present
state of knowledge.
In normal use there are no exceptional health, safety or fire hazards associated with this range of products. Please obey the
usage and storage instructions.
This product is distributed, manufactured, and sold by Turbon. IBM, the IBM logo, the IBM trademarks and IBM
Trade Dress are owned by International Business Machines Corporation and are used under a license from IBM.
Page 5 of 5
|