CHEIL INDUSTRIES
STAREN
MATERIALS SAFETY DATA SHEET
SECTION 1 - Product Description
Manufacturer's Name : Cheil Industries Inc.
Emergency Telephone No. : 82-61-689-1531
Address : Yeosu Plant, Chemical Division, Cheil Industries Inc.
62, Pyeongnyeo-dong, Yeosu-si, Jeollanam-do, Korea
Grade Name : staren F.R. PC NH-1023SP
Chemical Name and Synonyms : Flame Retardant Polycarbonate
SECTION 2 - Physical Data
Boiling Point ( 鈩? ) : Not Applicable
Vapor Pressure ( mmHg ) : Not Applicable
Solubility in Water : Not Soluble
Appearance : Pellet of all color, no odor
Specific Gravity ( Water = 1 ) : 1.18 鈭? 1.22
SECTION 3 - Ingredients
Polycarbonate : 88 鈭? 98%
Impact Modifier : 1 鈭? 5%
Flame Retardant Agent (Non Bromine, Non Chlorine Type) : 3 鈭? 10%
Polytetrafluoroethylene : 0.2 鈭? 0.5%
Anti Oxidant : 0.1 鈭? 0.5%
Substances listed in the ingredients section are chemicals which
concentration is more than 0.1% if the substance is on the list of
potential carcinogens cited in OSHA Hazard Communication Standard.
SECTION 4 - Fire and Explosion Hazard Data
Flash Point : Not Applicable
Extinguish Media : Water, CO2, Antimony Halide, Alcohol Foam and Dry
Chemicals
Unusual Fire and Explosion Hazards : Dense black smoke can liberate,
if burned without oxygen.
MATERIALS SAFETY DATA SHEET(NH-1023SP) -CHEIL INDUSTRIES INC. -1-
Flammability Limits in Air ( % by volume ) : Lower - Not Applicable
Upper - Not Applicable
SECTION 5 - Reactive Data
Stability ( Conditions to Avoid ) : Spark, Open Flame
At the temperature over 300鈩?, combustible gas may be liberated.
Hazardous Decomposition Product : None
Hazardous Polymerization Product : None
SECTION 6 - Health Hazardous Data
Eye : Solid or Dusts may cause irritation due to mechanical contact.
Eye contact : Flush with water for 15 minutes or more mechanical attention.
Skin contact : Wash affected areas with soap and water.
SECTION 7 - Environmental and Disposal Information
Action to be taken in case that material is released or spilled
鈬? Eliminate source of ignition and soak up with absorbent or flush away large
volume of water.
Disposal Method
鈬? Bury in landfill or burn in an adequate incinerator in accordance with all
applicable federal, state and local regulations.
SECTION 8 - Certification of Hazardous Material
In this section, we certify that the grade mentioned here does not contain
the following listed materials.
Primary important Material List
- Arsenic and its Compounds
- Asbestos ( all type )
- Benzene
- Beryllium and its Compounds
- Cadmium and its Compounds
- Chromium and its Compounds
- Dioxines
- Difuranes
- Ethylene Glycol Ethers and their Acetates
- Epichlorohydrine
- Mercury and its Compounds
MATERIALS SAFETY DATA SHEET(NH-1023SP) -CHEIL INDUSTRIES INC. -2-
- ODE : Ozone Depletion Chemical ( including CFC-11, CFC-12, CFC-13,
CFC-114, CFC-115, HALON-1211, HALON-1301, HALON-2402 )
- PCB : Polychlorinated Bisphenyls
- PBBs : Polybrominated Biphenyls
- PBBE : Polybrominated Biphenyl Ethers
- PBDE : Polybrominated Diphenyl Ethers
- PCT : Polychloro Triphenyls
- TBBA : Polybrominated Bisphenyl A
- Toluene
- Vinylchloride
- Xylenes
Secondary Important Material List
- Cyanides
- Formaldehyde Monomer
- Hydrazine
- Lead and its Compounds
- Metal Carbonyls
- Nitrosamine
- Nitrosamide
- Pentachlorophenol
- Polyhalodibenzofuranes
- Polycyclic Aromatic Hydrocarbons
- Selenium and its Compounds
- Tellurium and its Compounds
- Thallium and its Compounds
We hereby certify that the above statements are true and correct in every
respect. If the statements are not true, all responsibility will belong to
CHEIL.
Issued Date :
STAROY
CHEIL INDUSTRIES INC.
MATERIALS SAFETY DATA SHEET(NH-1023SP) -CHEIL INDUSTRIES INC. -3-
|