STAR                                         EX

   MATERIALS SAFETY                                      DATA             SHEET

SECTION 1 - Product Description

Manufacturer's Name : Cheil Industries Inc.

Emergency Telephone No. : 82-662-689-1531

Address : Yeosu Plant, Chemical Division, Cheil Industries Inc.

           62, Pyeongnyeo-dong, Yeosu-si, Jeollanam-do, 555-210, Korea

Grade Name : starex Flame Retardant ABS VH-0810

Chemical Name and Synonyms : Acrylonitrile-Butadiene-Styrene(CAS No. 9003-56-9)



SECTION 2 - INGREDIENTS

ABS(Acrylonitrile-Butadiene-Styrene) : 70 � 80%

Flame Retardant Agent : 20 � 30%





 Substances lised in the ingredients section are chemicals of which concentration is more

than 1% or 0.1% if the substance is on the list of potential carcinogens cited in OSHA

Hazard Communication Standard.





SECTION 3 - PHYSICAL CHARACTERISTICS

Boiling Point(â„?) : Not Applicable

Vapor Pressure(mmHg) : Not Applicable

Vapor Density(air = 1) : Not Applicable

Evaporation Rate(Butyl Acetate = 1) : Not Applicable

Solubility in Water : Insoluble

Appearance : Solid Pellet

Specific Gravity(H2O = 1) : 1.17 � 1.20





SECTION 4 - FIRE AND EXPLOSION HAZARD DATA

Flash Point(â„?) : Not Applicable

Flammable Limits in Air(vol%) : Lower - Not Applicable

                                   Upper - Not Applicable

Extinguishing Media : Water, Water Spray, CO2, Foam, Dry Chemical Powder

Special Fire Fighting Procedure : Firefighters should be equipped with goggles and self-

                                   contained breathing apparatus to avoid smoke or gases

Unusual Fire and Explosion Hazards : Dense smoke and Irritating Gas









                                                                                           -1-

MATERIALS SAFETY DATA SHEET (VH-0810) - CHEIL INDUSTRIES INC. -

SECTION 5 - REACTIVITY DATA

Stability : Stable under Normal Condition

Conditions to Avoid : Spark, Open Flame

                           At temperature over 300 â„?, combustible gas may be liberated.

Incompatibility(Materials to Avoid) : None

Hazardous Decomposition Product : None

Hazardous Polymerization : Will not Occur.





SECTION 6 - HEALTH HAZARD DATA

Routes of Entry :

 Inhalation, Ingestion, Skin and Eye Contact of Solid or Dusts.

  - May cause irritation due to mechanical contact.

 Inhalation of Fumes or Gases Liberated from Heated Material

  - May cause irritation to respiration.

 Permissible Exposure Level : Not Assigned(Nonvolatile)

 Effects of Overexposure: Unknown

First Aid

 Inhalation of Fumes or Gases : Remove person immediately to fresh air. Get medical

                                     attention.

 Ingestion : Rinse mouth with water. Promptly induce vomiting, and get medical

              attention.

 Eye Contact : Flush with water for 15 minutes. Get medical attention as soon as

                    possible.

 Skin Contact : Mechanical Injury Only





SECTION 7 - ENVIRONMENTAL AND DISPOSAL INFORMATION

Steps to be Taken in Case Material is Released or Spilled :

 Eliminate source of ignition.

 Sweep up, and remove or reuse, if possible.

Waste Disposal Method :

 Bury in landfill or burn in an adequate incinerator in accordance with all applicable

 federal, state and local regulations.





SECTION 8 - CERTIFICATIONS OF HAZARDOUS MATERIALS

In this section, we certify that the grades mentioned here do not contain the following

listed materials.





   Primary Important Material List

   - Ammonium nitrate(CAS no. 6484-52-2)

   - Arsenic and its Compounds        - Asbestos(all types)

   - Benzene(CAS no. 7440-43-9)



                                                                                          -2-

MATERIALS SAFETY DATA SHEET (VH-0810) - CHEIL INDUSTRIES INC. -

  - Beryllium and its Compounds

  - Cadmium(CAS no. 7440-43-9) and its Compounds

  - Chromium and its Compounds

  - Dioxines

  - Difuranes

  - Ethylene Glycol Ethers and their Acetates

  - Epichlorohydrine

  - Mercury and its Compounds

  - ODE : Ozone Depletion Chemical

              including CFC-11(CAS No. 75-69-7), CFC-12(CAS No. 75-71-8),

              CFC-13(CAS No. 75-72-9), CFC-114(CAS No. 1320-37-2),

              CFC-115(CAS No. 76-15-3), HALON-1211, HALON-1301, HALON-2402

  - PCBs : Polychlorinated Bisphenyls

  - PBBEs : Polybrominated Biphenyl Ethers

  - PBDEs : Polybrominated Diphenyl Ethers

  - PCTs : Polychlorinated Triphenyls

  - Toluene

  - Vinylchloride

  - Xylene





 Secondary Important Material List

  - Cyanides

  - Formaldehyde Monomer

  - Hydrazine

  - Lead and its Compounds

  - Metal Carbonyls

  - Nitrosamine

  - Nitrosamide

  - Pentachlorophenol

  - Polyhalodibenzofuranes

  - Polycyclic Aromatic Hydrocarbons

  - Selenium and its Compounds

  - Tellurium and its Compounds

  - Thallium and its Compounds





    We hereby certify that the above statements are true and correct

  in every respect. If the statements are not true, all responsibility

  will belong to CHEIL.





                             Issued Date : Jun. 25. 1998



                                                                             -3-

MATERIALS SAFETY DATA SHEET (VH-0810) - CHEIL INDUSTRIES INC. -