CHEIL INDUSTRIES
STAREX
MATERIALS SAFETY DATA SHEET
SECTION 1 - Product Description
Manufacturer's Name : Cheil Industries Inc.
Emergency Telephone NO. : 82-62-689-1531
Address : Yeosu Plant, Chemical Division, Cheil Industries Inc.
62, Pyeongnyeo-dong, Yeosu-si, Jeollanam-do, Korea
Grade Name : starex ABS PT-0170M
Chemical Name and Synonyms : Acrylonitrile - Butadiene - Styrene
SECTION 2 - Physical Data
Boiling Point ( 鈩?) : Not Applicable
Vapor Pressure ( mmHg ) : Not Applicable
Solubility in Water : Not Soluble
Appearance and Odor : Solid and No Odor
Specific Gravity ( Water = 1 ) : 1.03 鈭? 1.05
SECTION 3 - Ingredients
Acrylonitrile - Butadiene - Styrene : 99%
Substances listed in the ingredients section are chemicals which
concentration is more than 0.1% if the substance is on the list of
potential carcinogens cited in OSHA Hazard Communication Standard.
SECTION 4 - Fire and Explosion Hazard Data
Flash Point : Not Applicable
Extinguish Media : Water, CO2, Antimony Halide and Dry Chemicals
Unusual Fire and Explosion Hazards : Dense black smoke can liberate
if burned without oxygen.
Flammability Limits in Air ( % by volume ) : Lower - Not Applicable
Upper - Not Applicable
MATERIALS SAFETY DATA SHEET (PT-0170M) - CHEIL INDUSTRIES INC. - 1 -
SECTION 5 - Reactive Data
Stability ( Conditions to Avoid ) : Spark, Open Flame
300 鈩?, combustible gas may be liberated.
At Temperature over
Hazardous Decomposition Product : None
Hazardous Polymerization Product : None
SECTION 6 - Health Hazardous Data
Eye : Solid or Dusts may cause irritation due to mecanical contact.
Eye contact : Flush with water for 15 minutes or more mechanical attention.
Skin Contact : Mechanical Injury only.
SECTION 7 - Environmental and Disposal Information
Action to be taken in case that material is released or spilled :
Eliminate source of ignition and soak up with absorbent or flush
away large volume of water.
Disposal Method :
Bury in landfill or burn in an adequate incinerator in accordance
with all applicable federal, state and local regulations.
SECTION 8 - Certification of Hazardous Material
In this section, we certify that the grade mentioned here does not
contain the following listed materials.
Primary important Material List
- Antimony and its Compounds
- Arsenic and its Compounds
- Asbestos ( all type )
- Benzene
- Beryllium and its Compounds
- Cadmium and its Compounds
- Chromium and its Compounds
- Dioxines
- Difuranes
- Ethylene Glycol Ethers and their Acetates
- Epichlorohydrine
- Mercury and its Compounds
- ODE : Ozone Depletion Chemical ( including CFC-11, CFC-12, CFC-13,
CFC-114, CFC-115, HALON-1211, HALON-1301, HALON-2402 )
MATERIALS SAFETY DATA SHEET (PT-0170M) - CHEIL INDUSTRIES INC. - 2 -
- PCB : Polychlorinated Bisphenyls
- PBBs : Polybrominated Biphenyls
- PBBEs : Polybrominated Biphenyl Ethers
- PBDEs : Polybrominated Diphenyl Ethers
- PCTs : Polychlorinated Triphenyls
- TBBA : Tetrabromo Bisphenyl A
- Toluene
- Vinylchloride
- Xylenes
Secondary Important Material List
- Cyanides
- Formaldehyde Monomer
- Hydrazine
- Lead and its Compounds
- Metal Carbonyls
- Nitrosamine
- Nitrosamide
- Pentachlorophenol
- Polyhalodibenzofuranes
- Polycyclic Aromatic Hydrocarbons
- Selenium and its Compounds
- Tellurium and its Compounds
- Thallium and its Compounds
We hereby certify that the above statements are true and correct
in every respect. If the statements are not true, all responsibility
will belong to CHEIL.
Issued Date : MAY. 31. 2001
STAREX
CHEIL INDUSTRIES INC.
MATERIALS SAFETY DATA SHEET (PT-0170M) - CHEIL INDUSTRIES INC. - 3 -
|