Material Safety Data Sheet U.S. Department of Labor
May be used to comply with Occupational Safety and Health Administration
OSHA's Hazard Communication Standard, (Non-Mandatory-Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072
Note: Blank spaces are not permitted. If any item is not applicable, or no
IDENTITY (As Used on Label and List)
TINGUE POWDERED WAX information is available, the space must be marked to indicate that.
NA = Not Applicable NIA = No Information Available
Section I 鈥? Identity
Manufacturer's Name Emergency Telephone Number
609-966-0440
SEACORD CORPORATION
Address (Number, Street, City, State, and ZIP Code) Telephone Number For Information
TH
SAME
17 & MICKLE STS.
Date Prepared
Signature of Preparer (optional)
Chemical Family
Section II 鈥? Hazardous Ingredients
Chemical Identity; Common Name(s) CAS # OSHA PEL ACGIH TLV Other Limits %(optional)
NONE
Section III 鈥? Physical Data
Boiling Point Specific Gravity (H20=1)
>600 F 0.55
NA
Vapor Pressure (mm Hg.) Melting Point ~130 F
NA
Vapor Density (AIR=1) Evaporation Rate NA
(Butyl Acetate = 1)
pH ,1% % Volatile
NA NA
Solubility In Water
NEGLIGIBLE
Appearance and Odor
OFF-WHITE WAXY BEADS; MILD FATTY ODOR
Section IV 鈥? Fire and Explosion Hazard Data
Flash Point (Method Used) Flammable Limits LEL UEL
565 F, COC NA NA
Extinguishing Media
FOAM, DRY CHEMICAL, WATER FOG, SAND
Special Fire Fighting Procedures
DO NOT USE WATER STREAM, MATERIAL FLOATS
Unusual Fire and Explosion Hazards
ONLY USUAL HAZARDS ASSOCIATED WITH ORGANIC DUST.
Page 1
Section V 鈥? Physical Hazards / Reactivity Data
Stability Unstable Conditions to
X
Stable
Incompatibility (Materials to Avoid)
NONE KNOWN
Hazardous Decomposition or Byproducts
CO2 FROM BURNING
Hazardous May Occur Conditions to Avoid
Polymerization
X
Will Not Occur
Section VI 鈥? Health Hazard Data
Routes(s) of Entry: Inhalation? Skin? Ingestion?
X X IMPROBABLE
Health Hazards (Acute and Chronic)
NONE KNOWN
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
NO NO NO
Signs and Symptoms of Exposure
MOLTEN MATERIAL CAN CAUSE THERMAL BURNS
Medical Conditions Generally Aggravated by Exposure
NONE KNOWN
Section VII 鈥? First Aid Measures
1. Inhalation
IF IRRITATION OCCURS, MOVE TO FRESH AIR.
2. Eyes
WASH WITH WATER CONSULT A PHYSICIAN
3. Skin
WASH WITH SOAP AND WATER
4. Ingestion
NA
Section VIII 鈥? Preventative Measures
Respiratory Protection (Specify Type)
DISPOSABLE DUST RESPIRATORM IF REQUIRED. 3M MODEL 8710 IS RECOMMENDED
Ventilation Local Exhaust Special
IF NEEDED FOR HEATED FUMES NONE REQUIRED
Mechanical (General) Other
NONE REQUIRED NONE REQUIRED
Protective Gloves Eye Protection
NONE REQUIRED CHEMICAL SAFETY GLASSES
Other Protective Clothing or Equipment
NA
Work/Hygienic Practices
USE NORMAL INDUSTRIAL HYGIENIC PROCEDURES.
Section IX 鈥? Special Precautions / Spill Leak Procedures
Steps to Be Taken in Case Material is Released or Spilled
MATERIAL IS NON HAZARDOUS. USE NORMAL HOUSEKEEPING PROCEDURES.
Waste Disposal Method
DISPOSE OF IN ACCORDANCE TO LOCAL, STATE AND FEDERAL REGULATIONS
Precautions to Be Taking in Handling and Storing
NO SPECIAL PRECAUTIONS NECESSARY
Other Precautions
Section X鈥? Other Information
|