\
Material Safety Data Sheet U.S. Department of Labor
May be used to comply with Occupational Safety and Health Administration
OSHA's Hazard Communication Standard, (Non-Mandatory-Form)
29 CFR 1910.1200. Standard must be Form Approved
consulted for specific requirements. OMB No. 1218-0072
Note: Blank spaces are not permitted. If any item is not applicable, or no
IDENTITY (As Used on Label and List)
information is available, the space must be marked to indicate that.
Ultra Shine
NA = Not Applicable NIA = No Information Available
Section I 鈥? Identity
Manufacturer's Name Emergency Telephone Number
Royaltone Company Inc 918 663-9666
Address (Number, Street, City, State, and ZIP Code) Telephone Number For Information
9504 E 55th St 918-622-6677
Date Prepared
Tulsa OK 74145
1/25/05
Signature of Preparer (optional)
Chemical Family
Aerosol paint ID# 20L001N-11.5
Section II 鈥? Hazardous Ingredients
Chemical Identity; Common Name(s) CAS # % LEL vapor press mg/Hg @ 20C OSHA PEL ACGIH TLV SAR313 List
Carcinogen
Acetone 67-64-1 20.0 12.8 181.0 750 750 N N
Methyl Ethyl Ketone 78-93-3 15.0 1.8 83.0 200 200 Y N
Propane 74-98-6 15.0 2.2 110.0 1000 1000 N N
N-Butyl Acetane 123-86-4 12.0 1.7 6.3 150 150 N N
Isopropyl Acetate 108-21-4 10.0 N/A N/A 250 250 N N
Ethyl Acetate 141-78-6 7.0 2.2 29.3 400 400 N N
N-Butyl 106-97-8 7.0 1.8 17.0 800 800 N N
Isopropanol 67-63-0 6.0 2.0 33.0 400 400 N N
2-Ethylhexyl Acetate 103-09-3 1.0 N/A N/A N/A N/A N N
N-Butyl Alcohol 71-36-3 1.0 1.4 4.4 50 50 Y N
Butyl Benzyl Phthalate 85-68-7 1.0 N/A N/A N/A N/A Y N
Section III 鈥? Physical Data
Boiling Point Specific Gravity (H20=1)
-43F 鈥? 340F
Vapor Pressure (mm Hg.) Melting Point
340
Vapor Density (AIR=1) Evaporation Rate
heavier Faster than
(Butyl Acetate = 1)
ether
pH ,1% % Voatile 99.4
Solubility In Water
negligible
Appearance and Odor
opaque spray- solvent odor
Section IV 鈥? Fire and Explosion Hazard Data
Flammable Limits LEL UEL
Flash Point (Method Used) less than 12鈥橣
14.8 22.0
Extinguishing Media
Use (NFPA) Class B extinguisher CO2, or foam
Special Fire Fighting Procedures
Fight fire from safe distance. Wear full protective equipment, including self contained breathing gear
Unusual Fire and Explosion Hazards
Pressure build up due to heat exposure may cause containers to explode. Water may be used to cool ruptured
containers
Page 1
Section V 鈥? Physical Hazards / Reactivity Data
Stability Unstable Conditions to Avoid
High temperatures and open flames
Stable x
unknown
Incompatibility (Materials to Avoid)
carbon monoxide, carbon dioxide
Hazardous Decomposition or Byproducts
Hazardous May Occur Conditions to Avoid
Polymerization
Will Not Occur x
Section VI 鈥? Health Hazard Data
Routes(s) of Entry: Inhalation? Skin? Eyes? Ingestion?
yes yes
Health Hazards (Acute and Chronic)
Acute: Anasthetic effect. Irritation of the respiratory tract or acute nervous system depression characterized by
headache, dizziness, staggering gait, confusion, unconsciousness or coma Chronic: reports have associated
repeated and prolonged over-exposure to solvents with liver, kidney, brain and nervous system damage.
Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
Not considered carcinogen no no no no
Signs and Symptoms of Exposure
Eye: contact may cause redness, irritation, tearing and blurred vision Skin: contact may dry skion causing
cracks and irritation Ingestion: may be harmful or fatal if swallowed
Medical Conditions Generally Aggravated by Exposure
Asthma and other respiratory ailments. Chemical sensitization.
Section VII 鈥? First Aid Measures
1. Inhalation Remove from exposure. Administer oxygen if necessary. Call a physcian
immediately flush with water for 15 minutes
2. Eyes
remove contaminated clothing and shoes. Wash contact area with soap and water. Wash clothing and
3. Skin
shoes before reuse
4. Ingestion drink one or two glasses of water to dilute. Do not induce vomiting. Contact Physcian or Poison
ControlCenter immediately
Section VIII 鈥? Preventitive Measures
Respiratory Protection (Specify Type) In areas with unrestricted ventilation, an OSHA approved respirator to remove
solid airbourne particles of over spray may be used if prolonged and repeated exposure likely. In areas
of restricted ventilation, the use of OSHA approved chemical/mechanical filter designed to remove both
particles and vapors is recommended.
Ventilation Local Exhaust Special
yes Supply sufficient ventilation to keep air
contaminant concentration below current
OSHA (PEL) or ACGIH(TLV)
Mechanical (General) Other
yes none
Protective Gloves Eye Protection
Use if contact is likely safety glasses to prevent eye contact
Other Protective Clothing or Equipment
Eye wash solutions and safety showers
Work/Hygienic Practices
Wash hands before eating or using washroom
Section IX 鈥? Special Precautions / Spill Leak Procedures
Steps to Be Taken in Case Material is Released or Spilled
Eliminate all ignition sources. Provide ventilation. Collect spills with absorbent material and non sparking tools
Waste Disposal Method
Dispose in accordance with all federal, state, and local regulations. Do not incinerate containers
Precautions to Be Taking in Handling and Storing
Avoid breathing vapors- Do not store in areas above 120鈥橣 or near fire or open flame. When storing in large
quantities, storage conditions should comply with OSHA 1910.106
Other Precautions
Avoid getting in eyes. Use in well ventilated area- Prevent prolonged or repeated breathing of vapor or spray
mist. Do not take internally. Keep out of reach of children.
Section X鈥? Other Information
Page 2
|