Zep Inc.
Material Safety Data Sheet
1310 Seaboard Industrial Blvd.
Atlanta, GA 30318
1-877-I-BUY-ZEP (428-9937)
and Safe Handling and Disposal Information
www.zep.com
Section 1. Chemical Product and Company Identification
Product name ZEP-A- LUME
Aluminum Cleaner
Product use
Product code 1063
Date of issue Supersedes 12/19/00
07/12/04
Emergency For MSDS Information:
Telephone Compliance Services 1-877-I-BUY-ZEP (428-9937)
Numbers
For Medical Emergency
INFOTRAC: (877) 541-2016 Toll Free - All Calls
Recorded
For Transportation Emergency
CHEMTREC: (800) 424-9300 - All Calls Recorded
In the District of Columbia (202) 483-7616
Prepared By
Compliance Services
Printing date: 08/05/08
1420 Seaboard Industrial Blvd.
Atlanta, GA 30318
Section 2. Composition, Information on Ingredients
Name of hazardous ingredients CAS # % by Weight Exposure Limits
SULFURIC ACID; oil of vitriol 7664-93-9 10-20 OSHA PEL (United States).
TWA: 1 mg/m3 Form: Mist
HYDROFLUORIC ACID ; hydrogen fluoride; hydrofluoride 7664-39-3 5-10 OSHA PEL (United States).
TWA: 3 ppm
ACGIH/OSHA (United States).
STEL: 6 ppm
PHOSPHORIC ACID 7664-38-2 <5 OSHA PEL (United States).
TWA: 1 mg/m3
OSHA / ACGIH (United States).
STEL: 3 mg/m3
ETHYLENE GLYCOL MONOBUTYL ETHER; 2-butoxyethanol; butyl 111-76-2 <5 ACGIH TLV (United States). Skin
cellosolve TWA: 20 ppm Form: Vapor
OSHA PEL (United States). Skin
TWA: 25 ppm Form: Vapor
Section 3. Hazards Identification HMIS
Health 3
Routes of Entry Absorbed through skin. Eye contact. Inhalation.
Acute Effects
Fire Hazard 0
Ingestion.
Hazardous by the following route of exposure: of skin contact (corrosive). Skin contact may
Skin Reactivity 0
produce burns. Contact results in immediate skin absorption which may cause hypocalcemia
(calcium loss) . This effect may be delayed for several hours after exposure. Severe over-
exposure by absorption can result in death. Get immediate medical attention.
Hazardous by the following route of exposure: of eye contact (corrosive). Eye contact can
Eyes Personal Protection X
result in corneal damage or blindness.
Inhalation Hazardous by the following route of exposure: of inhalation. Vapors and aerosol can produce
mucous membrane, nose and throat irritation. May cause inflammation and pulmonary
edema. May be fatal if inhaled.
Ingestion May be fatal if swallowed. May cause burns to mouth, throat and stomach. May cause
Impaired kidney function.
NOTE: MSDS data pertains to the product as delivered in the original shipping container(s). Risk of adverse health effects are lessened by
following all prescribed safety precautions, including use of proper personal protective equipment.
Strong inorganic acid mists containing sulfuric acid: Classified Group 1 (Proven for human) by IARC;
Carcinogenic Effects
Group 1 (Known To Be Human Carcinogen) by NTP
The substance may be toxic to kidneys. Repeated or prolonged exposure to the substance can produce
Chronic Effects
target organs damage. Repeated or prolonged contact with spray or mist may produce chronic eye
irritation and severe skin irritation. Repeated or prolonged exposure to spray or mist may produce
respiratory tract irritation, leading to frequent attacks of bronchial infection. Repeated skin exposure
can produce local skin destruction or dermatitis.
See Toxicological Information (section 11)
Page: 1/3
Product code 1063 Product Name ZEP-A- LUME
Material Safety Data Sheet
Section 4. First Aid Measures
Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Check for and
Eye Contact
remove any contact lenses. Cold water may be used. Get medical attention immediately.
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing
Skin Contact
contaminated clothing and shoes. Cold water may be used. Wash clothing before reuse. Get immediate
medical attention while applying and massaging 2.5% calcium gluconate gel, or while soaking skin with
0.13% zephiran chloride solution.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give
Inhalation
oxygen. Get medical attention immediately.
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an
Ingestion
unconscious person. If affected person is conscious, give plenty of water to drink. Get medical attention
immediately.
Section 5. Fire Fighting Measures
None. Flammable Limits Not applicable. 0
Flash Point
3 0
Non-combustible.
Flammability
May emit toxic fumes under fire conditions.
Fire hazard
Use water spray, fog or foam. Fire-fighters should wear positive pressure
Fire-fighting procedures
self-contained breathing apparatus (SCBA) and full turnout gear.
Section 6. Accidental Release Measures
Put on appropriate personal protective equipment (see section 8). Dilute with water and mop up if water-
Spill Clean up
soluble or absorb with an inert dry material and place in an appropriate waste disposal container. To clean the
floor and all objects contaminated by this material, use [***]. detergent. Finish cleaning by spreading water on
the contaminated surface and dispose of according to local and regional authority requirements.
Section 7. Handling and Storage
Do not get in eyes, on skin, or on clothing. Put on appropriate personal protective equipment (see section 8). Do not
Handling
ingest. Do not breathe vapor or mist. Keep container closed. Use only with adequate ventilation. Wash thoroughly
after handling. Wash contaminated clothing before reusing.
Keep container tightly closed. Keep container in a cool, well-ventilated area. Store between the following
Storage
temperatures: 40掳F - 120掳F (4.4掳C - 49掳C). Store away from incompatible materials.
Section 8. Exposure Controls, Personal Protection
Personal Protection Protective Clothing (Pictograms)
Splash goggles. Face shield.
Eyes
Wear chemical resistant gloves, a chemical resistant suit, and boots.
Body
Respiratory Use with adequate ventilation. Provide exhaust ventilation or other engineering controls to keep the airborne
concentrations of vapors below their respective threshold limit value. Wear appropriate respirator when ventilation is
inadequate.
Section 9. Physical and Chemical Properties
Physical State Liquid. Clear. Colorless.
Color
Sour. Acid. (Strong.)
Acidic. Odor
pH
Not applicable.
104.44掳C (220掳F) Vapor Pressure
Boiling Point
Not determined.
Specific Gravity 1.12 (Water = 1) Vapor Density
1 compared with Water
Evaporation Rate
Easily soluble in the following materials: cold water,
Solubility
55 (g/l). (4.9%)
hot water. VOC (Consumer)
Section 10. Stability and Reactivity
The product is stable.
Stability and Reactivity
Reactive with oxidizing agents, alkalis.
Incompatibility
Hazardous Polymerization Will not occur.
Hazardous Decomposition Products May emit toxic fumes under fire conditions. Hydrogen fluoride (HF). and sulfur oxides
(SO2, SO3 etc.)
Section 11. Toxicological Information
Toxicity to Animals Sulfuric Acid:^[25,45,50,70
ORAL (LD50): Acute: 2140 mg/kg [Rat.].
Hydrofluoric acid:^[25,45,50,70
VAPOR (LC50): Acute: 1276 ppm 1 hour(s) [Rat].
Phosphoric acid:^[25,45,50,70
ORAL (LD50): Acute: 1530 mg/kg [Rat.].
DERMAL (LD50): Acute: 2740 mg/kg [Rabbit.]. >1260 mg/kg [Rat].
Ethylene Glycol Monobutyl Ether:^[25,45,50,70
ORAL (LD50): Acute: 1746 mg/kg [Rat]. 1519 mg/kg [Mouse]. 1414 mg/kg [Guinea
pig].
DERMAL (LD50): Acute: 435 mg/kg [Rabbit]. >2000 mg/kg [Guinea pig].
VAPOR (LC50): Acute: 700 ppm 7 hour(s) [Mouse]. >633 ppm 1 hour(s) [Guinea pig].
>691 ppm 1 hour(s) [Guinea pig].
Page: 2/3
Product code 1063 Product Name ZEP-A- LUME
Material Safety Data Sheet
Section 12. Ecological Information
Not available.
Ecotoxicity
Biodegradable/OECD Not available.
Section 13. Disposal Considerations
Waste must be disposed of in accordance with federal, Waste Stream Code: D002
Waste
Classification: - (Corrosive. Hazardous
state and local environmental control regulations.
Information
waste.)
Origin: - (Hazardous waste Regulation)
Consult your local or regional authorities.
Section 14. Transport Information
Proper shipping name Corrosive liquids, poisonous, n.o.s. (Hydrofluoric acid, Sulfuric Acid)
Class 8: Corrosive liquid. Class 6.1: Poisonous material. UN number 2922
DOT Classification
NOTE: DOT classification applies to most package sizes. For specific container size classifications or for size exceptions, refer to
the Bill of Lading with your shipment.
TDG Class 8: Corrosive liquid.
TDG Classification
Section 15. Regulatory Information
SARA 313 toxic chemical notification and release reporting:
U.S. Federal Regulations
Sulfuric Acid
Hydrofluoric acid
Ethylene Glycol Monobutyl Ether
Clean Water Act (CWA) 311: Sulfuric Acid; Hydrofluoric acid; Phosphoric acid
Clean Air Act (CAA) 112 regulated toxic substances: Ethylene Glycol Monobutyl Ether
All Components of this product are listed or exempt from listing on TSCA inventory.
WARNING: This product contains a chemical or chemicals known to the state of California to
State Regulations
cause cancer, birth defects or other reproductive harm.: Strong inorganic acid mists containing
sulfuric acid
Class D-1A: Material causing immediate and serious toxic effects (Very toxic).
WHMIS (Canada)
Class D-2B: Material causing other toxic effects (Toxic).
Class E: Corrosive liquid.
Section 16. Other Information
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any
liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.
|