Search   
MSDS 
:
 4'-Methoxyacetophenone, 98%
CAS 
:
 100-06-1
SYNONYMS 
:
 P-Acetanisole; P-Acetylanisole.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 100-06-1 |4'-Methoxyacetophenone | 98.0 | 202-815-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.Light sensitive.The toxicological properties of
this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Human systemic
effects by inhalation include: a pulse rate increase without a fall
in blood pressure and blood pressure elevation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Use
agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 100-06-1:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to pale yellow
Odor: Pleasant odor
pH: Not available.
Vapor Pressure: 0.01 mm Hg @ 25
Viscosity: Not available.
Boiling Point: 152-154C
Freezing/Melting Point: 36 - 38 deg C
Autoignition Temperature: Not available.
Flash Point: 138 deg C ( 280.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in alcohol and ether
Specific Gravity/Density:
Molecular Formula: C9H10O2
Molecular Weight: 150.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. May discolor on exposure to light.
Conditions to Avoid:
Incompatible materials, light, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizng agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 100-06-1: AM9240000
LD50/LC50:
CAS# 100-06-1: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
mouse: LD50 = 820 mg/kg; Oral, mouse: LD50 = 820 mg/kg; Oral, rat:
LD50 = 1720 mg/kg; Oral, rat: LD50 = 4300 mg/kg; Skin, rabbit: LD50
= >5 gm/kg.
Not available.
Carcinogenicity:
4'-Methoxyacetophenone -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 100-06-1: 2
Canada
CAS# 100-06-1 is listed on Canada's DSL List.
CAS# 100-06-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 100-06-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/15/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl Benzilate, 99% 76-89-1
Methyl (r)-(+)-Lactate 17392-83-5
2-Thiophenecarboxylic acid hydrazide, 97% 2361-27-5
Acetonyltriphenylphosphonium chloride, 99% 1235-21-8
3,5-Dinitro-2-Methylbenzyl Alcohol, 97% 80866-93-9
Sodium perchlorate monohydrate 7601-89-0
Sodium periodate 7790-28-5
2,2,5,5-Tetramethyl-4-Methylene-3-Formyl- Imidazolidine-1-Oxyl, Free 82814-77-5
Sucrose Diacetate Hexaisobutyrate (Pract) 126-13-6
Sodium peroxide 1310-73-2
Sodium phosphate dibasic heptahydrate 7558-79-4
Dichloromethane-D2, 100.0 Atom % D 1665-00-5
6-Hydroxydopamine hydrobromide, 99% 636-00-0
Hepta-O-Acetyl-Cellobiosyl-Betha-Azide, 99% 33012-50-9
4-Fluorophenyl isocyanate, 99% 1195-45-5
Potassium Sodium Tartrate Tetrahydrate 6381-59-5
3,4-Dihydroxycinnamic acid, 99+%, predominantly trans isomer 331-39-5
Sodium Pyrophosphate Decahydrate 7722-88-5
Sodium Salicylate 54-21-7
Paraldehyde, 99.5% (gc) 123-63-7
4-Chloro-3-nitrobenzenesulfonyl chloride, 99% (titr.) 97-08-5
8-Hydroxyquinoline-N-oxide, 99% 1127-45-3
3-Bromo-4-Fluorobenzaldehyde, 99% 77771-02-9
1,2:5,6-Di-O-Cyclohexylidene-3-Cyano-Alpha -D-Allofuranose, 93% 62293-19-0
Trans-2-Hexenal, 99% 6728-26-3
Sodium Succinate Hexahydrate 6106-21-4
Sodium sulfate anhydrous 7757-82-6
1-(3-Methoxyphenyl)-piperazine dihydrochloride, 98% 6968-76-9
Sodium Sulfide Nonahydrate 1313-82-2
Glyoxalbis-(2-Hydroxyanil), P.A. 1149-16-2
4'-Methoxyacetophenone, 98% 100-06-1
Sodium Sulfite, Anhydrous 7757-83-7
Quinoline Yellow, Water Soluble 8004-92-0
Sodium L-(+)-tartrate dihydrate 868-18-8
2,5-Dimethylbenzoxazole, 99% 5676-58-4
1-Phenyldodecane, 97% 123-01-3
Sodium Tetraphenyl Boron 143-66-8
Sodium thiocyanate 540-72-7
2,6-Diiodo-4-Nitroaniline, 97% 5398-27-6
Linalool, 97% 78-70-6
Sodium Thiosulfate Anhydrous 7772-98-7
Sodium Thiosulfate Pentahydrate 10102-17-7
Phenoxyacetyl chloride, 98% 701-99-5
2,3:5,6-Di-O-Cyclohexylidene-D-Mannolactone, 98% 0-00-1
Palmitic acid sodium salt, 98% 408-35-5
Diazo Red RC 4274-03-7
Sodium tungstate dihydrate 10213-10-2
Biuret, 99% 108-19-0
5-Chlorobenzotriazole, 99% 94-97-3
Ethyl cyanoformate, 99% 623-49-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net