Search   
MSDS 
:
 Acetonyltriphenylphosphonium chloride, 99%
CAS 
:
 1235-21-8
SYNONYMS 
:
 Phosphonium; acetonyltriphenyl-, chloride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1235-21-8 |Acetonyltriphenylphosphonium chloride | 99 | 214-974-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store protected from moisture.
Store in a cool, dry area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1235-21-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Granules
Color: very slightly beige
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 243.00 - 245.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C21H20ClOP
Molecular Weight: 354.80

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat, strong oxidants, exposure to
moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, moisture.
Hazardous Decomposition Products:
Hydrogen chloride, phosphine, carbon monoxide, oxides of phosphorus,
irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1235-21-8: TA1841000
LD50/LC50:
Not available.
Carcinogenicity:
Acetonyltriphenylphosphonium chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1235-21-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1235-21-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1235-21-8 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Methyl Benzilate, 99% 76-89-1
Methyl (r)-(+)-Lactate 17392-83-5
2-Thiophenecarboxylic acid hydrazide, 97% 2361-27-5
Acetonyltriphenylphosphonium chloride, 99% 1235-21-8
3,5-Dinitro-2-Methylbenzyl Alcohol, 97% 80866-93-9
Sodium perchlorate monohydrate 7601-89-0
Sodium periodate 7790-28-5
2,2,5,5-Tetramethyl-4-Methylene-3-Formyl- Imidazolidine-1-Oxyl, Free 82814-77-5
Sucrose Diacetate Hexaisobutyrate (Pract) 126-13-6
Sodium peroxide 1310-73-2
Sodium phosphate dibasic heptahydrate 7558-79-4
Dichloromethane-D2, 100.0 Atom % D 1665-00-5
6-Hydroxydopamine hydrobromide, 99% 636-00-0
Hepta-O-Acetyl-Cellobiosyl-Betha-Azide, 99% 33012-50-9
4-Fluorophenyl isocyanate, 99% 1195-45-5
Potassium Sodium Tartrate Tetrahydrate 6381-59-5
3,4-Dihydroxycinnamic acid, 99+%, predominantly trans isomer 331-39-5
Sodium Pyrophosphate Decahydrate 7722-88-5
Sodium Salicylate 54-21-7
Paraldehyde, 99.5% (gc) 123-63-7
4-Chloro-3-nitrobenzenesulfonyl chloride, 99% (titr.) 97-08-5
8-Hydroxyquinoline-N-oxide, 99% 1127-45-3
3-Bromo-4-Fluorobenzaldehyde, 99% 77771-02-9
1,2:5,6-Di-O-Cyclohexylidene-3-Cyano-Alpha -D-Allofuranose, 93% 62293-19-0
Trans-2-Hexenal, 99% 6728-26-3
Sodium Succinate Hexahydrate 6106-21-4
Sodium sulfate anhydrous 7757-82-6
1-(3-Methoxyphenyl)-piperazine dihydrochloride, 98% 6968-76-9
Sodium Sulfide Nonahydrate 1313-82-2
Glyoxalbis-(2-Hydroxyanil), P.A. 1149-16-2
4'-Methoxyacetophenone, 98% 100-06-1
Sodium Sulfite, Anhydrous 7757-83-7
Quinoline Yellow, Water Soluble 8004-92-0
Sodium L-(+)-tartrate dihydrate 868-18-8
2,5-Dimethylbenzoxazole, 99% 5676-58-4
1-Phenyldodecane, 97% 123-01-3
Sodium Tetraphenyl Boron 143-66-8
Sodium thiocyanate 540-72-7
2,6-Diiodo-4-Nitroaniline, 97% 5398-27-6
Linalool, 97% 78-70-6
Sodium Thiosulfate Anhydrous 7772-98-7
Sodium Thiosulfate Pentahydrate 10102-17-7
Phenoxyacetyl chloride, 98% 701-99-5
2,3:5,6-Di-O-Cyclohexylidene-D-Mannolactone, 98% 0-00-1
Palmitic acid sodium salt, 98% 408-35-5
Diazo Red RC 4274-03-7
Sodium tungstate dihydrate 10213-10-2
Biuret, 99% 108-19-0
5-Chlorobenzotriazole, 99% 94-97-3
Ethyl cyanoformate, 99% 623-49-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net