Search   
MSDS 
:
 Lead (II) Iodide
CAS 
:
 10101-63-0
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10101-63-0 |Lead iodide | 100 | 233-256-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 20/22 33 61 62 50/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed. Danger of cumulative
effects. May cause harm to the unborn child. Possible risk of
impaired fertility. Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. May cause effects similar to
those described for ingestion.
Chronic:
Chronic exposure to lead may result in plumbism which is
characterized by lead line in gum, headache, muscle weakness, mental
changes.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Antidote:
The use of d-Penicillamine as a chelating agent should be determined
by qualified medical personnel. The use of Dimercaprol or BAL
(British Anti-Lewisite) as a chelating agent should be determined by
qualified medical personnel.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool place in the original container and protect from
sunlight. Keep from contact with oxidizing materials.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Exposure Limits
CAS# 10101-63-0:
United Kingdom, WEL - TWA: (listed as lead compounds): 0.15 mg/m3
(as Pb)
United Kingdom, WEL - STEL: (listed as lead compounds): 0.45 mg/m
TWA (as Pb)
United States OSHA: 50 ??g/m3 TWA (as Pb); 30 ??g/m3 Action Level (
Pb. Poison - see 29 CFR 1910.10 25) (listed under Lead, inorgani
compounds).
Belgium - TWA: (listed as lead, inorganic compounds): 0.15 mg/m3
(dust and fume)
France - VME: (listed as lead compounds): 0.1 mg/m3 VME (as Pb)
Germany: (listed as lead compounds): 0.1 mg/m3 VME (as Pb)
Japan: (listed as lead compounds): 0.1 mg/m3 OEL (except alkyl le
compounds, as Pb)
Malaysia: (listed as lead, inorganic compounds): 0.05 mg/m3 TWA (
Pb)
Netherlands: (listed as lead, inorganic compounds): 0.15 mg/m3 MA
(dust and smoke, as Pb)
Russia: (listed as lead, inorganic compounds): 0.5 mg/m3 TWA (as
Spain: (listed as lead, inorganic compounds): 0.15 mg/m3 VLA-ED (
Pb)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not applicable.
Boiling Point: 954 deg C
Freezing/Melting Point: 402 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in cold water
Specific Gravity/Density: Not available.
Molecular Formula: PbI2
Molecular Weight: 461.009

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Light, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Hydrogen iodide, lead/lead oxides.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10101-63-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Lead iodide -
California: carcinogen, initial date 10/1/92 (listed as Lead compounds
NTP: Suspect carcinogen (listed as Lead compounds).
IARC: Group 2A carcinogen (listed as Lead, inorganic compounds).

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, INORGANIC, NOS(Lead iodide)
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, INORGANIC, NOS(Lead iodide)
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, INORGANIC, NOS(Lead iodide)
Hazard Class: 6.1
UN Number: 3288
Packing group: III
USA RQ: CAS# 10101-63-0: 10 lb final RQ; 4.54 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 61 May cause harm to the unborn child.
R 20/22 Harmful by inhalation and if swallowed.
R 33 Danger of cumulative effects.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
R 62 Possible risk of impaired fertility.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 10101-63-0: No information available.
Canada
CAS# 10101-63-0 is listed on Canada's NDSL List.
CAS# 10101-63-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10101-63-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Mercury (II) Nitrate 10045-94-0
3-Nitrophenol 554-84-7
Nitroethane 79-24-3
N-(4-Nitrobenzyl)-N-Propylamine Hydrochloride 68133-98-2
2-Nitrobenzoic Acid 552-16-9
Mercury (II) sulfide 1344-48-5
3-Nitrobenzaldehyde 99-61-6
2-Nitrobenzaldehyde 552-89-6
Nitric Acid SG1.5-Fuming 7697-37-2
Nitrate Buffer (Modified) 7664-38-2
4-Nitrobenzaldehyde 555-16-8
Nitrate Buffer Concentrate 7379-28-4
3-Iodobenzyl Alcohol, 99% 57455-06-8
Mercury (II) thiocyanate 592-85-8
Ninhydrin Solution 71-36-3
Mercurochrome 129-16-8
Mercury Chloride 10112-91-1
Furil dioxime 522-27-0
3-Nitroaniline 99-09-2
Nigrosine 8005-03-6
Nicotinic Acid 59-67-6
Nickel (II) Sulfate Heptahydrate 10101-98-1
Mercury(I) nitrate, dihydrate 7782-86-7
1-Naphthylamine-7-Sulfonic Acid 119-28-8
Mesitylene 108-67-8
2-(5-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde monohydrate, 95%
Litmus 1393-92-6
Lithium Sulfate, Monohydrate 10102-25-7
Tetraethyl 1,1,2,2-ethanetetracarboxylate, 97% 632-56-4
Mesityl oxide 141-79-7
Lithium Metaborate 13453-69-5
Methane Sulfonic Acid 75-75-2
Methane sulfonic acid, sodium salt 2386-57-4
Lithium Perchlorate Dried 7791-03-9
Lithium Iodide 10377-51-2
Lithium acetate hydrated 546-89-4
Linseed Oil, Raw or Boiled 8001-26-1
Lithium Metal 98.5% in Liquid Paraffin 7439-93-2
D(+)Limonene 5989-27-5
Methane sulfonyl chloride 124-63-0
Lead (II) Sulfate 7446-14-2
Lead (II) Iodide 10101-63-0
Lead (II) Carbonate, Basic Precipitated 1319-46-6
Methoxylamine Hydrochloride 593-56-6
4-Methoxy-1-Naphthaldehyde, 99% 15971-29-6
p-Ethoxybenzaldehyde, 99% 10031-82-0
Sodium Hydroxide 20-30% 1310-73-2
Sodium Hydroxide 2.000N 1310-73-2
P-Naphtholbenzein 145-50-6
Silver Nitrate 0.001N-0.171N 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net