Search   
MSDS 
:
 Tetraethyl 1,1,2,2-ethanetetracarboxylate, 97%
CAS 
:
 632-56-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 632-56-4 |Tetraethyl 1,1,2,2-ethanetetracarboxyl| 97 | 211-180-7 |
| |ate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid breathing dust.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 632-56-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 73-77 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H22O8
Molecular Weight: 318.32

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 632-56-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetraethyl 1,1,2,2-ethanetetracarboxylate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 632-56-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 632-56-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 632-56-4 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 7/29/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Mercury (II) Nitrate 10045-94-0
3-Nitrophenol 554-84-7
Nitroethane 79-24-3
N-(4-Nitrobenzyl)-N-Propylamine Hydrochloride 68133-98-2
2-Nitrobenzoic Acid 552-16-9
Mercury (II) sulfide 1344-48-5
3-Nitrobenzaldehyde 99-61-6
2-Nitrobenzaldehyde 552-89-6
Nitric Acid SG1.5-Fuming 7697-37-2
Nitrate Buffer (Modified) 7664-38-2
4-Nitrobenzaldehyde 555-16-8
Nitrate Buffer Concentrate 7379-28-4
3-Iodobenzyl Alcohol, 99% 57455-06-8
Mercury (II) thiocyanate 592-85-8
Ninhydrin Solution 71-36-3
Mercurochrome 129-16-8
Mercury Chloride 10112-91-1
Furil dioxime 522-27-0
3-Nitroaniline 99-09-2
Nigrosine 8005-03-6
Nicotinic Acid 59-67-6
Nickel (II) Sulfate Heptahydrate 10101-98-1
Mercury(I) nitrate, dihydrate 7782-86-7
1-Naphthylamine-7-Sulfonic Acid 119-28-8
Mesitylene 108-67-8
2-(5-Hydroxycarbonyl-2-nitrophenyl) malondialdehyde monohydrate, 95%
Litmus 1393-92-6
Lithium Sulfate, Monohydrate 10102-25-7
Tetraethyl 1,1,2,2-ethanetetracarboxylate, 97% 632-56-4
Mesityl oxide 141-79-7
Lithium Metaborate 13453-69-5
Methane Sulfonic Acid 75-75-2
Methane sulfonic acid, sodium salt 2386-57-4
Lithium Perchlorate Dried 7791-03-9
Lithium Iodide 10377-51-2
Lithium acetate hydrated 546-89-4
Linseed Oil, Raw or Boiled 8001-26-1
Lithium Metal 98.5% in Liquid Paraffin 7439-93-2
D(+)Limonene 5989-27-5
Methane sulfonyl chloride 124-63-0
Lead (II) Sulfate 7446-14-2
Lead (II) Iodide 10101-63-0
Lead (II) Carbonate, Basic Precipitated 1319-46-6
Methoxylamine Hydrochloride 593-56-6
4-Methoxy-1-Naphthaldehyde, 99% 15971-29-6
p-Ethoxybenzaldehyde, 99% 10031-82-0
Sodium Hydroxide 20-30% 1310-73-2
Sodium Hydroxide 2.000N 1310-73-2
P-Naphtholbenzein 145-50-6
Silver Nitrate 0.001N-0.171N 7732-18-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net