Search   
MSDS 
:
 Dimanganese decacarbonyl, 98%
CAS 
:
 10170-69-1
SYNONYMS 
:
 Manganese carbonyl; considered to be an inorganic compound because it     decomposes to carbon monoxide and manganese.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 10170-69-1 |Dimanganese decacarbonyl | 98 | 233-445-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.Light
sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this
material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The lowest exposure
concentration of manganese at which early effects on the CNS and the
lungs may occur is still unknown. However, once neurological signs
are present, they tend to continue and worsen after exposure ends.
Chronic:
Chronic inhalation or ingestion may result in manganism
characterized by neurological symptoms such as headache, apathy, and
weakness of the legs, followed by psychosis and neurological symptoms
similar to those of Parkinson's disease. May impair fertility. Other
chronic effects from inhaling high amounts of manganese include an
increased incidence of cough and bronchitis and susceptibility to
infectious lung disease.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing
is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep container
tightly closed.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Do not expose to air. Store
protected from light. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels below recommended
exposure limits. Facilities storing or utilizing this material should
be equipped with an eyewash facility and a safety shower.
Exposure Limits
CAS# 10170-69-1:
United Kingdom, WEL - TWA: (listed as manganese, inorganic
compounds): 0.5 mg/m3 TWA
United Kingdom, WEL - STEL: (listed as manganese, inorganic
compounds): 1.5 mg/m3 STEL
United States OSHA: 5 mg/m3 Ceiling (as Mn) (listed under Mangan
compounds, n.o.s.).
Belgium - TWA: (listed as manganese compounds, n.o.s.): 0.2 mg/m3
(as Mn)
Japan: (listed as manganese compounds, n.o.s.): 0.3 mg/m3 OEL (ex
organic compounds, as Mn)
Malaysia: (listed as manganese, inorganic compounds): 0.2 mg/m3 T
(as Mn)
Netherlands: (listed as manganese compounds, n.o.s.): 3 mg/m3 STE
(as Mn)
Netherlands: (listed as manganese compounds, n.o.s.): 1 mg/m3 MAC
Mn)
Spain: (listed as manganese, inorganic compounds): 0.2 mg/m3 VLA-
(as Mn)

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: orange - gold
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 154 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 110 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: 1.75 g/cm3
Molecular Formula: C10Mn2O10
Molecular Weight: 389.87

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
This material should not be used or stored in conditions of high (or
highly fluctuating) temperature or be exposed to any possible source
of ignition. Exposure of the material to direct sunlight or the air
should be kept to a minimum.
Conditions to Avoid:
Light, dust generation, exposure to air, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, halogens.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, oxides of manganese.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 10170-69-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Dimanganese decacarbonyl -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METAL CARBONYLS, N.O.S.*
Hazard Class: 6.1
UN Number: 3281
Packing Group: III
IMO
Shipping Name: METAL CARBONYLS, N.O.S.
Hazard Class: 6.1
UN Number: 3281
Packing Group: III
RID/ADR
Shipping Name: METAL CARBONYLS, N.O.S.
Hazard Class: 6.1
UN Number: 3281
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10170-69-1: No information available.
Canada
CAS# 10170-69-1 is listed on Canada's NDSL List.
CAS# 10170-69-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10170-69-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/12/1999 Revision #3 Date: 9/03/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dipiperidinomethane, 99% 880-09-1
2,2,6,6-Tetramethylpiperdine Hydrobromide 935-21-7
Aqualine Electrolyte A 67-56-1
Aqualine Electrolyte C 56-23-5
2-Butynoic Acid, 98% 590-93-2
Methyl palmitate ,95% 112-39-0
3-Cyclohexenecarboxylic acid, 97%(GC) 4771-80-6
N-Methylaniline, p.a. 100-61-8
Acetic acid, 75% 64-19-7
Dimanganese decacarbonyl, 98% 10170-69-1
2,3:5,6-Di-O-Isopropylidene-Alpha-D-Mannofuranose, 98% 14131-84-1
Quinalizarin, 95% (uv-vis) 81-61-8
Methyl 4-Fluorophenylacetate 34837-84-8
N,N'-Dicyclohexyl-4-Morpholinecarboxamide 4975-73-9
2-Bromobenzoyl chloride, 98% 7154-66-7
ICP Standard Metal Solution in Nitric Acid 7697-37-2
ICP Standard Metal Solution in 1% Nitric Acid 7697-37-2
4-Bromo Trityl Imidazole 0-00-1
ICP Standard Metal Solution in 2% Nitric Acid 7697-37-2
Barrier Coating Solution 64-17-5
Hexanes, pesticide residue analysis grade 110-54-3
Ethyl isocyanatoacetate, 99+% (gc) 2949-22-6
Ethyl bis(2,4-dinitrophenyl)acetate 5833-18-1
Bis(4-Chlorophenyl)diselenide, 98% 20541-49-5
Chlorodimethylsilane, 96% (gc) 1066-35-9
Acetic acid, 33% 64-19-7
Protran 2 Solution 109-99-9
Tripopionin, 97% 139-45-7
CIPAC A, C and D Solutions 7439-95-4
Methyl 2-Chloro-6-Fluorophenylacetate 103473-99-0
Methyl 1-Benzyl-5-Oxo-3-Pyrrolidine-Carboxylate, 98% 51535-00-3
1,3,5-Tri-Tert-Butylbenzene 1460-02-2
Triisopropylorthoformate, 95% 4447-60-3
Five Alcohol Custom Blend 67-63-0
Bis(Dimethylamino)Dimethylsilane, 96% 3768-58-9
Perfluoro Hexanoic Acid 307-24-4
2-Aminomethylpyrimidine 75985-45-4
2-Pyrimidinethiocarboxamide 4537-73-9
0.05-0.5M Iodine in 90% pyridine/10% water 110-86-1
1H-Tetrazole 288-94-8
P-Cyanopentylbenzene 10270-29-8
Allyl-2-(hydroxy)isobutyrate 19444-21-4
N,N-Dimethylformamide-D7, Packaged in 0.75ml Ampules, 99.5 Atom % D 4472-41-7
4.625% w/v Hydrochloric acid 7647-01-0
Dichloroacetic acid, 3% in toluene 79-43-6
trans-2-Octene, 98% 13389-42-9
DL-Alpha-Methoxyphenylacetic Acid, 99% (Titr.) 7021-09-2
SDS Page Solution Kit 77-86-1
N-Trityl-Imidazolpyruvic Acid 0-00-1
BOC-6-Amino-2-Oxo-Hexanoic Acid 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net