Search   
MSDS 
:
 2-Bromobenzoyl chloride, 98%
CAS 
:
 7154-66-7
SYNONYMS 
:
 Benzoyl chloride, o-bromo-
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7154-66-7 |2-Bromobenzoyl chloride | 98 | 230-507-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.Lachrymator (substance
which increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears). May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Inhalation may be fatal as
a result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema. May cause systemic
effects. May cause burning sensation, coughing, wheezing, laryngitis,
shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. Water hydrolyzes material liberating acidic
gas which in contact with metal surfaces can generate flammable
and/or explosive hydrogen gas.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide. Do NOT get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Cover with sand, dry lime or soda ash and place in
a closed container for disposal. Provide ventilation. Do not get
water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Keep container tightly closed. Do not get on skin or in eyes. Do not
ingest or inhale. Use with adequate ventilation. Do not allow contact
with water. Use only in a chemical fume hood. Discard contaminated
shoes. Keep from contact with moist air and steam.
Storage:
Keep refrigerated. (Store below 4C/39F.) Keep containers tightly
closed. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7154-66-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 245 deg C @ 760.00mm Hg
Freezing/Melting Point: 11 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Decomposes.
Specific Gravity/Density: 1.6700g/cm3
Molecular Formula: C7H4BrClO
Molecular Weight: 219.46

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, moisture, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, strong bases, alcohols, moisture, water.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide,
hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7154-66-7: DM6635000
LD50/LC50:
Not available.
Carcinogenicity:
2-Bromobenzoyl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7154-66-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7154-66-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7154-66-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dipiperidinomethane, 99% 880-09-1
2,2,6,6-Tetramethylpiperdine Hydrobromide 935-21-7
Aqualine Electrolyte A 67-56-1
Aqualine Electrolyte C 56-23-5
2-Butynoic Acid, 98% 590-93-2
Methyl palmitate ,95% 112-39-0
3-Cyclohexenecarboxylic acid, 97%(GC) 4771-80-6
N-Methylaniline, p.a. 100-61-8
Acetic acid, 75% 64-19-7
Dimanganese decacarbonyl, 98% 10170-69-1
2,3:5,6-Di-O-Isopropylidene-Alpha-D-Mannofuranose, 98% 14131-84-1
Quinalizarin, 95% (uv-vis) 81-61-8
Methyl 4-Fluorophenylacetate 34837-84-8
N,N'-Dicyclohexyl-4-Morpholinecarboxamide 4975-73-9
2-Bromobenzoyl chloride, 98% 7154-66-7
ICP Standard Metal Solution in Nitric Acid 7697-37-2
ICP Standard Metal Solution in 1% Nitric Acid 7697-37-2
4-Bromo Trityl Imidazole 0-00-1
ICP Standard Metal Solution in 2% Nitric Acid 7697-37-2
Barrier Coating Solution 64-17-5
Hexanes, pesticide residue analysis grade 110-54-3
Ethyl isocyanatoacetate, 99+% (gc) 2949-22-6
Ethyl bis(2,4-dinitrophenyl)acetate 5833-18-1
Bis(4-Chlorophenyl)diselenide, 98% 20541-49-5
Chlorodimethylsilane, 96% (gc) 1066-35-9
Acetic acid, 33% 64-19-7
Protran 2 Solution 109-99-9
Tripopionin, 97% 139-45-7
CIPAC A, C and D Solutions 7439-95-4
Methyl 2-Chloro-6-Fluorophenylacetate 103473-99-0
Methyl 1-Benzyl-5-Oxo-3-Pyrrolidine-Carboxylate, 98% 51535-00-3
1,3,5-Tri-Tert-Butylbenzene 1460-02-2
Triisopropylorthoformate, 95% 4447-60-3
Five Alcohol Custom Blend 67-63-0
Bis(Dimethylamino)Dimethylsilane, 96% 3768-58-9
Perfluoro Hexanoic Acid 307-24-4
2-Aminomethylpyrimidine 75985-45-4
2-Pyrimidinethiocarboxamide 4537-73-9
0.05-0.5M Iodine in 90% pyridine/10% water 110-86-1
1H-Tetrazole 288-94-8
P-Cyanopentylbenzene 10270-29-8
Allyl-2-(hydroxy)isobutyrate 19444-21-4
N,N-Dimethylformamide-D7, Packaged in 0.75ml Ampules, 99.5 Atom % D 4472-41-7
4.625% w/v Hydrochloric acid 7647-01-0
Dichloroacetic acid, 3% in toluene 79-43-6
trans-2-Octene, 98% 13389-42-9
DL-Alpha-Methoxyphenylacetic Acid, 99% (Titr.) 7021-09-2
SDS Page Solution Kit 77-86-1
N-Trityl-Imidazolpyruvic Acid 0-00-1
BOC-6-Amino-2-Oxo-Hexanoic Acid 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net