Search   
MSDS 
:
 Ethyl isocyanatoacetate, 99+% (gc)
CAS 
:
 2949-22-6
SYNONYMS 
:
 Ethyl isocyanate acetate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2949-22-6 |Acetic acid, isocyanato-, ethyl ester | 99 | 220-967-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Containers
may explode when heated. Combustible liquid and vapor.
Extinguishing Media:
Use dry chemical or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2949-22-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 67-68 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 72 deg C ( 161.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1510g/cm3
Molecular Formula: C5H7NO3
Molecular Weight: 129.12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Acids, bases, alcohols, amines.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2949-22-6: AI4450000
LD50/LC50:
CAS# 2949-22-6: Oral, mouse: LD50 = 1600 mg/kg; Oral, rat: LD50 =
1130 mg/kg.
Carcinogenicity:
Acetic acid, isocyanato-, ethyl ester -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2949-22-6: No information available.
Canada
CAS# 2949-22-6 is listed on Canada's NDSL List.
CAS# 2949-22-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2949-22-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1998 Revision #3 Date: 10/10/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Dipiperidinomethane, 99% 880-09-1
2,2,6,6-Tetramethylpiperdine Hydrobromide 935-21-7
Aqualine Electrolyte A 67-56-1
Aqualine Electrolyte C 56-23-5
2-Butynoic Acid, 98% 590-93-2
Methyl palmitate ,95% 112-39-0
3-Cyclohexenecarboxylic acid, 97%(GC) 4771-80-6
N-Methylaniline, p.a. 100-61-8
Acetic acid, 75% 64-19-7
Dimanganese decacarbonyl, 98% 10170-69-1
2,3:5,6-Di-O-Isopropylidene-Alpha-D-Mannofuranose, 98% 14131-84-1
Quinalizarin, 95% (uv-vis) 81-61-8
Methyl 4-Fluorophenylacetate 34837-84-8
N,N'-Dicyclohexyl-4-Morpholinecarboxamide 4975-73-9
2-Bromobenzoyl chloride, 98% 7154-66-7
ICP Standard Metal Solution in Nitric Acid 7697-37-2
ICP Standard Metal Solution in 1% Nitric Acid 7697-37-2
4-Bromo Trityl Imidazole 0-00-1
ICP Standard Metal Solution in 2% Nitric Acid 7697-37-2
Barrier Coating Solution 64-17-5
Hexanes, pesticide residue analysis grade 110-54-3
Ethyl isocyanatoacetate, 99+% (gc) 2949-22-6
Ethyl bis(2,4-dinitrophenyl)acetate 5833-18-1
Bis(4-Chlorophenyl)diselenide, 98% 20541-49-5
Chlorodimethylsilane, 96% (gc) 1066-35-9
Acetic acid, 33% 64-19-7
Protran 2 Solution 109-99-9
Tripopionin, 97% 139-45-7
CIPAC A, C and D Solutions 7439-95-4
Methyl 2-Chloro-6-Fluorophenylacetate 103473-99-0
Methyl 1-Benzyl-5-Oxo-3-Pyrrolidine-Carboxylate, 98% 51535-00-3
1,3,5-Tri-Tert-Butylbenzene 1460-02-2
Triisopropylorthoformate, 95% 4447-60-3
Five Alcohol Custom Blend 67-63-0
Bis(Dimethylamino)Dimethylsilane, 96% 3768-58-9
Perfluoro Hexanoic Acid 307-24-4
2-Aminomethylpyrimidine 75985-45-4
2-Pyrimidinethiocarboxamide 4537-73-9
0.05-0.5M Iodine in 90% pyridine/10% water 110-86-1
1H-Tetrazole 288-94-8
P-Cyanopentylbenzene 10270-29-8
Allyl-2-(hydroxy)isobutyrate 19444-21-4
N,N-Dimethylformamide-D7, Packaged in 0.75ml Ampules, 99.5 Atom % D 4472-41-7
4.625% w/v Hydrochloric acid 7647-01-0
Dichloroacetic acid, 3% in toluene 79-43-6
trans-2-Octene, 98% 13389-42-9
DL-Alpha-Methoxyphenylacetic Acid, 99% (Titr.) 7021-09-2
SDS Page Solution Kit 77-86-1
N-Trityl-Imidazolpyruvic Acid 0-00-1
BOC-6-Amino-2-Oxo-Hexanoic Acid 0-00-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net