Search   
MSDS 
:
 4-Methylbenzylamine, 98%
CAS 
:
 104-84-7
SYNONYMS 
:
 p-Xylylamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 104-84-7 |4-Methylbenzylamine, 98% | 98% | 203-243-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Combustible liquid.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Avoid contact with skin and eyes.
Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 104-84-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 195 deg C @ 760.00mm Hg
Freezing/Melting Point: 12 - 13 deg C
Autoignition Temperature: Not available.
Flash Point: 75 deg C ( 167.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .9520g/cm3
Molecular Formula: C8H11N
Molecular Weight: 121.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Acids, acid chlorides, acid anhydrides, carbon dioxide, strong
oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 104-84-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Methylbenzylamine, 98% -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3267
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 3267
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, BASIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3267
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 104-84-7: No information available.
Canada
CAS# 104-84-7 is listed on Canada's NDSL List.
CAS# 104-84-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 104-84-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titan Yellow 1829-00-1
Titanium Metal- Crushed Sponge 7440-32-6
Titanium (III) Chloride Solution 7705-07-9
Titanium (IV) Sulfate Solution 7664-93-9
Titanium (III) Sulfate Solution 7664-93-9
Thymolsulfonephthalein di-(methyliminodiacetic acid) Sodium Salt 1945-77-3
Thymolphthalein indicator solution 64-17-5
Thymolphthalein 125-20-2
Di-2-Ethylhexylamine 99% 106-20-7
Thiophen 110-02-1
Thionyl Chloride 7719-09-7
Thionine Acetate 78338-22-4
Tetraethylammonium hydroxide solution 77-98-5
Tetraethylammonium Hydrogen Sulfate 16873-13-5
Tetradecyltrimethyl Ammonium Bromide 1119-97-7
Tetrabutyl Ammonium Phosphate 5574-97-0
Cesium Iodide, 99.9% 7789-17-5
Tetra-n-Butyl Ammonium Iodide 311-28-4
4-Methylbenzylamine, 98% 104-84-7
4-Phenyl-1,2,3,6-Tetrahydropyridine Hydrochloride, 99% 43064-12-6
Tetra-n-Butyl Ammonium Hydrogen Sulfate 32503-27-8
Tetrabutyl Ammonium Fluoride 429-41-4
Tetrabutyl Ammonium Bromide 1643-19-2
Terpineol 8006-39-1
Terephthalic Acid 100-21-0
Taurine 107-35-7
Molecular Sieves, 4A, Powder, Max. Grain-Size 50 Micron 70955-01-0
(+)-Tartaric Acid 87-69-4
N,N,N',N'-Tetramethylethylenediamine 110-18-9
3,3',5,5'-Tetramethylbenzidine 54827-17-7
Tetramethylammonium Hydroxide Solution 75-59-2
Tetramethylammonium Hydrogen Sulfate 80526-82-5
Tetraisopropyl Orthotitanate (Titanium IV Isopropoxide) 546-68-9
Tetrahydrofurfuryl Alcohol 97-99-4
Tri-n-Pentylamine 621-77-2
OptiPhase TriSafe 0-00-0
OptiPhase Polysafe 0-00-2
1-(Phenylmethyl)-3-pyrrolidinone, 98% (gc) 775-16-6
OptiPhase Supermix 0-00-0
OptiPhase Hi-Load 0-00-0
OptiPhase Hi-Safe 3 0-00-0
OptiPhase Hisafe 2 0-00-4
OptiScint HiSafe
Betaplate Scint 0-00-0
Opti-Solve 108-88-3
Sulfuryl Chloride 7791-25-5
Chloroacetone 78-95-5
Sulfuric acid fuming 7446-11-9
Sulfur Dichloride 10545-99-0
Di-Sulfur Dichloride 10025-67-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net