Search   
MSDS 
:
 Tetrabutyl Ammonium Fluoride
CAS 
:
 429-41-4
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 429-41-4 |Tetrabutyl Ammonium Fluoride | 100.0 | 207-057-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Chronic effects include excessive
calcification of the bones, ligaments, and tendons.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Overexposure to fluoride may cause salivation, nausea, vomiting, abdom
inal pain, fever, and difficulty breathing. May cause hypocalcemia in
blood.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
Chronic effects include excessive calcification of the bones,
ligaments, and tendons.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower lids. Get medical aid
immediately.
Skin:
Get medical aid if irritation develops or persists. Flush skin with
plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.
Autoignition Temperature: Not available.
Flash Point: Not available.
NFPA Rating: Not published.
Explosion Limits, Lower: Not available.
Upper: Not available.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use process enclosure, local exhaust ventilation, or other
engineering controls to control airborne levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134. Always use a NIOSH-approved respirator when
necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Appearance: white to light cream
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 62 deg C
Decomposition Temperature: Not available.
Solubility: Soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: (CH2CH2CH2CH2)4NF.3H2O
Molecular Weight: 311.2693

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 429-41-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutyl Ammonium Fluoride -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

For further information, contact Fisher Scientific.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

CDG/CPL
Shipping Name: TOXIC SOLID, ORGANIC, NOS (Tetrabutyl ammonium fluoride
Hazard Class: 6.1
UN Number: 2811
Packing Group: II
IMO
No information available.
IATA
No information available.
RID/ADR
No information available.
Canadian TDG
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 429-41-4:
Canada
CAS# 429-41-4 is listed on Canada's DSL/NDSL List.
WHMIS: Not available.
CAS# 429-41-4 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 429-41-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/16/1996 Revision #6 Date: 12/12/1997

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall Fisher be liable
for any claims, losses, or damages of any third party or for lost profits
or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if Fisher has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------


Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titan Yellow 1829-00-1
Titanium Metal- Crushed Sponge 7440-32-6
Titanium (III) Chloride Solution 7705-07-9
Titanium (IV) Sulfate Solution 7664-93-9
Titanium (III) Sulfate Solution 7664-93-9
Thymolsulfonephthalein di-(methyliminodiacetic acid) Sodium Salt 1945-77-3
Thymolphthalein indicator solution 64-17-5
Thymolphthalein 125-20-2
Di-2-Ethylhexylamine 99% 106-20-7
Thiophen 110-02-1
Thionyl Chloride 7719-09-7
Thionine Acetate 78338-22-4
Tetraethylammonium hydroxide solution 77-98-5
Tetraethylammonium Hydrogen Sulfate 16873-13-5
Tetradecyltrimethyl Ammonium Bromide 1119-97-7
Tetrabutyl Ammonium Phosphate 5574-97-0
Cesium Iodide, 99.9% 7789-17-5
Tetra-n-Butyl Ammonium Iodide 311-28-4
4-Methylbenzylamine, 98% 104-84-7
4-Phenyl-1,2,3,6-Tetrahydropyridine Hydrochloride, 99% 43064-12-6
Tetra-n-Butyl Ammonium Hydrogen Sulfate 32503-27-8
Tetrabutyl Ammonium Fluoride 429-41-4
Tetrabutyl Ammonium Bromide 1643-19-2
Terpineol 8006-39-1
Terephthalic Acid 100-21-0
Taurine 107-35-7
Molecular Sieves, 4A, Powder, Max. Grain-Size 50 Micron 70955-01-0
(+)-Tartaric Acid 87-69-4
N,N,N',N'-Tetramethylethylenediamine 110-18-9
3,3',5,5'-Tetramethylbenzidine 54827-17-7
Tetramethylammonium Hydroxide Solution 75-59-2
Tetramethylammonium Hydrogen Sulfate 80526-82-5
Tetraisopropyl Orthotitanate (Titanium IV Isopropoxide) 546-68-9
Tetrahydrofurfuryl Alcohol 97-99-4
Tri-n-Pentylamine 621-77-2
OptiPhase TriSafe 0-00-0
OptiPhase Polysafe 0-00-2
1-(Phenylmethyl)-3-pyrrolidinone, 98% (gc) 775-16-6
OptiPhase Supermix 0-00-0
OptiPhase Hi-Load 0-00-0
OptiPhase Hi-Safe 3 0-00-0
OptiPhase Hisafe 2 0-00-4
OptiScint HiSafe
Betaplate Scint 0-00-0
Opti-Solve 108-88-3
Sulfuryl Chloride 7791-25-5
Chloroacetone 78-95-5
Sulfuric acid fuming 7446-11-9
Sulfur Dichloride 10545-99-0
Di-Sulfur Dichloride 10025-67-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net