Search   
MSDS 
:
 Tetramethylammonium Hydroxide Solution
CAS 
:
 75-59-2
SYNONYMS 
:
 N,N,N-Trimethylmethanaminium Hydroxide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 75-59-2 |TETRAMETHYLAMMONIUM HYDROXIDE | NAV | 200-882-9 |
|----------------|--------------------------------------|----------|-----------|
| 7732-18-5 |WATER | Balance | 231-791-2 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. Prolonged and/or repeated contact may cause
defatting of the skin and dermatitis.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause central nervous system
depression.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Exposure produces central nervous system depression. Inhalation may
be fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Containers can build up pressure if exposed to heat and/or fire. As
in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases may
be generated by thermal decomposition or combustion. Use water spray
to keep fire-exposed containers cool. Use extinguishing media
appropriate to the surrounding fire. Substance is noncombustible.
Vapors may be heavier than air. They can spread along the ground
and collect in low or confined areas. Contact with metals may evolve
flammable hydrogen gas.
Extinguishing Media:
Do NOT get water inside containers. For small fires, use dry
chemical, carbon dioxide, or water spray. For large fires, use dry
chemical, carbon dioxide, alcohol-resistant foam, or water spray.
Cool containers with flooding quantities of water until well after
fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Keep container tightly closed. Do not get on skin
or in eyes. Do not ingest or inhale. Use with adequate ventilation.
Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area. Do not store in metal containers.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 75-59-2:

CAS# 7732-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow - colorless
Odor: Ammonia-like odor.
pH: Not available.
Vapor Pressure: 17.5 mm Hg @ 20
Viscosity: Not available.
Boiling Point: 110 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in water
Specific Gravity/Density: 1.0200g/cm3
Molecular Formula: C4H13NO
Molecular Weight: 91.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Absorbs carbon
dioxide from the air.
Conditions to Avoid:
Incompatible materials, metals, excess heat, strong acids, oxidizers,
temperatures above 75C (167F).
Incompatibilities with Other Materials:
Strong acids, strong oxidizing agents, acid chlorides, acid
anhydrides, alkali metals, halogens, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, nitrogen, ammonia, amines, methanol.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 75-59-2: PA0875000
CAS# 7732-18-5: ZC0110000
LD50/LC50:
CAS# 75-59-2: Dermal, guinea pig: LD50 = 25 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
TETRAMETHYLAMMONIUM HYDROXIDE -
Not listed by ACGIH, IARC, or NTP.
WATER -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE
Hazard Class: 8
UN Number: 1835
Packing Group: II
IMO
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE
Hazard Class: 8
UN Number: 1835
Packing Group: II
RID/ADR
Shipping Name: TETRAMETHYLAMMONIUM HYDROXIDE
Hazard Class: 8
UN Number: 1835
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 75-59-2: No information available.
CAS# 7732-18-5: No information available.
Canada
CAS# 75-59-2 is listed on Canada's DSL List.
CAS# 7732-18-5 is listed on Canada's DSL List.
CAS# 75-59-2 is listed on Canada's Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-59-2 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 34 Causes burns.
MSDS Creation Date: 4/01/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titan Yellow 1829-00-1
Titanium Metal- Crushed Sponge 7440-32-6
Titanium (III) Chloride Solution 7705-07-9
Titanium (IV) Sulfate Solution 7664-93-9
Titanium (III) Sulfate Solution 7664-93-9
Thymolsulfonephthalein di-(methyliminodiacetic acid) Sodium Salt 1945-77-3
Thymolphthalein indicator solution 64-17-5
Thymolphthalein 125-20-2
Di-2-Ethylhexylamine 99% 106-20-7
Thiophen 110-02-1
Thionyl Chloride 7719-09-7
Thionine Acetate 78338-22-4
Tetraethylammonium hydroxide solution 77-98-5
Tetraethylammonium Hydrogen Sulfate 16873-13-5
Tetradecyltrimethyl Ammonium Bromide 1119-97-7
Tetrabutyl Ammonium Phosphate 5574-97-0
Cesium Iodide, 99.9% 7789-17-5
Tetra-n-Butyl Ammonium Iodide 311-28-4
4-Methylbenzylamine, 98% 104-84-7
4-Phenyl-1,2,3,6-Tetrahydropyridine Hydrochloride, 99% 43064-12-6
Tetra-n-Butyl Ammonium Hydrogen Sulfate 32503-27-8
Tetrabutyl Ammonium Fluoride 429-41-4
Tetrabutyl Ammonium Bromide 1643-19-2
Terpineol 8006-39-1
Terephthalic Acid 100-21-0
Taurine 107-35-7
Molecular Sieves, 4A, Powder, Max. Grain-Size 50 Micron 70955-01-0
(+)-Tartaric Acid 87-69-4
N,N,N',N'-Tetramethylethylenediamine 110-18-9
3,3',5,5'-Tetramethylbenzidine 54827-17-7
Tetramethylammonium Hydroxide Solution 75-59-2
Tetramethylammonium Hydrogen Sulfate 80526-82-5
Tetraisopropyl Orthotitanate (Titanium IV Isopropoxide) 546-68-9
Tetrahydrofurfuryl Alcohol 97-99-4
Tri-n-Pentylamine 621-77-2
OptiPhase TriSafe 0-00-0
OptiPhase Polysafe 0-00-2
1-(Phenylmethyl)-3-pyrrolidinone, 98% (gc) 775-16-6
OptiPhase Supermix 0-00-0
OptiPhase Hi-Load 0-00-0
OptiPhase Hi-Safe 3 0-00-0
OptiPhase Hisafe 2 0-00-4
OptiScint HiSafe
Betaplate Scint 0-00-0
Opti-Solve 108-88-3
Sulfuryl Chloride 7791-25-5
Chloroacetone 78-95-5
Sulfuric acid fuming 7446-11-9
Sulfur Dichloride 10545-99-0
Di-Sulfur Dichloride 10025-67-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net