Search   
MSDS 
:
 Tetrabutyl Ammonium Phosphate
CAS 
:
 5574-97-0
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5574-97-0 |Tetrabutyl Ammonium Phosphate | 100.0 | 226-947-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.The toxicological properties of this material
have not been fully investigated.Light sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.
Place under an inert atmosphere.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation. Store protected from light. Handle under an inert
atmosphere. Store protected from air.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store protected from light. Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5574-97-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white to off-white
Odor: ammonia-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 151-154C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density: 1.010
Molecular Formula: (CH3CH2CH2CH2)4NH2PO4
Molecular Weight: 339.2441

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, dust generation, exposure to air,
excess heat, strong oxidants.
Incompatibilities with Other Materials:
Air, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5574-97-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabutyl Ammonium Phosphate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 5574-97-0: No information available.
Canada
CAS# 5574-97-0 is listed on Canada's DSL List.
CAS# 5574-97-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5574-97-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/26/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titan Yellow 1829-00-1
Titanium Metal- Crushed Sponge 7440-32-6
Titanium (III) Chloride Solution 7705-07-9
Titanium (IV) Sulfate Solution 7664-93-9
Titanium (III) Sulfate Solution 7664-93-9
Thymolsulfonephthalein di-(methyliminodiacetic acid) Sodium Salt 1945-77-3
Thymolphthalein indicator solution 64-17-5
Thymolphthalein 125-20-2
Di-2-Ethylhexylamine 99% 106-20-7
Thiophen 110-02-1
Thionyl Chloride 7719-09-7
Thionine Acetate 78338-22-4
Tetraethylammonium hydroxide solution 77-98-5
Tetraethylammonium Hydrogen Sulfate 16873-13-5
Tetradecyltrimethyl Ammonium Bromide 1119-97-7
Tetrabutyl Ammonium Phosphate 5574-97-0
Cesium Iodide, 99.9% 7789-17-5
Tetra-n-Butyl Ammonium Iodide 311-28-4
4-Methylbenzylamine, 98% 104-84-7
4-Phenyl-1,2,3,6-Tetrahydropyridine Hydrochloride, 99% 43064-12-6
Tetra-n-Butyl Ammonium Hydrogen Sulfate 32503-27-8
Tetrabutyl Ammonium Fluoride 429-41-4
Tetrabutyl Ammonium Bromide 1643-19-2
Terpineol 8006-39-1
Terephthalic Acid 100-21-0
Taurine 107-35-7
Molecular Sieves, 4A, Powder, Max. Grain-Size 50 Micron 70955-01-0
(+)-Tartaric Acid 87-69-4
N,N,N',N'-Tetramethylethylenediamine 110-18-9
3,3',5,5'-Tetramethylbenzidine 54827-17-7
Tetramethylammonium Hydroxide Solution 75-59-2
Tetramethylammonium Hydrogen Sulfate 80526-82-5
Tetraisopropyl Orthotitanate (Titanium IV Isopropoxide) 546-68-9
Tetrahydrofurfuryl Alcohol 97-99-4
Tri-n-Pentylamine 621-77-2
OptiPhase TriSafe 0-00-0
OptiPhase Polysafe 0-00-2
1-(Phenylmethyl)-3-pyrrolidinone, 98% (gc) 775-16-6
OptiPhase Supermix 0-00-0
OptiPhase Hi-Load 0-00-0
OptiPhase Hi-Safe 3 0-00-0
OptiPhase Hisafe 2 0-00-4
OptiScint HiSafe
Betaplate Scint 0-00-0
Opti-Solve 108-88-3
Sulfuryl Chloride 7791-25-5
Chloroacetone 78-95-5
Sulfuric acid fuming 7446-11-9
Sulfur Dichloride 10545-99-0
Di-Sulfur Dichloride 10025-67-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net