Search   
MSDS 
:
 Ethylenediamine Anhydrous
CAS 
:
 107-15-3
SYNONYMS 
:
 1,2-Diaminoethane; B-Aminoethylamine; 1,2-Ethyldiamine;     Dimethylenediamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 107-15-3 |Ethylenediamine | >98.0 | 203-468-6
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 10 21/22 34 42/43

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful in contact with skin and if swallowed. Causes
burns. May cause sensitization by inhalation and skin
contact.Corrosive.Hygroscopic.Lachrymator (substance which increases
the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. May result in corneal injury. Causes redness
and pain. Lachrymator (substance which increases the flow of
tears).
Skin:
Harmful if absorbed through the skin. May cause skin sensitization,
an allergic reaction, which becomes evident upon re-exposure to this
material. Contact with the skin may cause severe irritation and
necrosis.
Ingestion:
Harmful if swallowed. May cause severe gastrointestinal tract
irritation with nausea, vomiting and possible burns. May cause
effects similar to those for inhalation exposure.
Inhalation:
Causes respiratory tract irritation. May cause severe allergic
respiratory reaction. Irritation may lead to chemical pneumonitis and
pulmonary edema. May cause liver and kidney damage. Causes chemical
burns to the respiratory tract. May cause heart disturbances,
possibly leading to cardiac arrest and death. May cause neurotoxic
effects including paresthesia.
Chronic:
Prolonged or repeated skin contact may cause defatting and
dermatitis. Repeated exposure may cause allergic respiratory reaction
(asthma).

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub or keep eyes closed.
Skin:
Immediately flush skin with plenty of soap and water for at least 15
minutes while removing contaminated clothing and shoes. Get medical
aid if irritation develops or persists. Wash clothing before reuse.
Destroy contaminated shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. Flammable
Liquid. Can release vapors that form explosive mixtures at
temperatures above the flashpoint. Use water spray to keep
fire-exposed containers cool. Containers may explode in the heat of
a fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wear a self contained breathing apparatus and appropriate Personal
protection. (See Exposure Controls, Personal Protection section).
Scoop up with a nonsparking tool, then place into a suitable
container for disposal. Remove all sources of ignition. Absorb spill
using an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as saw dust. Use
a spark-proof tool.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Use spark-proof
tools and explosion proof equipment. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Do not ingest or inhale.
Use only in a chemical fume hood. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne
concentrations below the permissible exposure limits.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: ammonia-like
pH: 11.9 @ 25 C.
Vapor Pressure: 10.7 mm Hg @ 20
Viscosity: 1.54 mPas 25 deg C
Boiling Point: 118 deg C @ 760.00mm Hg
Freezing/Melting Point: 8.5 deg C
Autoignition Temperature: 385 deg C ( 725.00 deg F)
Flash Point: 34 deg C ( 93.20 deg F)
Explosion Limits, lower: 2.70 vol %
Explosion Limits, upper: 16.60 vol %
Decomposition Temperature: >120 deg C
Solubility in water: Soluble.
Specific Gravity/Density: .8990g/cm3
Molecular Formula: C2H8N2
Molecular Weight: 60.10

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Absorbs carbon dioxide from air to form nonvolatile carbonate.
Conditions to Avoid:
Ignition sources, exposure to air, excess heat, exposure to moist air
or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, ammonia and/or
derivatives.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 107-15-3: KH8575000
LD50/LC50:
CAS# 107-15-3: Draize test, rabbit, eye: 750 ug Severe; Draize test,
rabbit, eye: 750 ug/24H Severe; Inhalation, mouse: LC50 = 300 mg/m3;
Oral, mouse: LD50 = 1 gm/kg; Oral, rat: LD50 = 1200 mg/kg; Skin,
rabbit: LD50 = 730 uL/kg.
Carcinogenicity:
Ethylenediamine -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: LC50 = 115.7 mg/L; 96 Hr.; Static
ConditionFish: Rainbow trout: LC50 = 230.0 mg/L; 96 Hr.; Static
ConditionWater flea EC50 = 0.88 mg/L; 48 Hr.; UnspecifiedBacteria:
Phytobacterium phosphoreum: EC50 = 20.0 mg/L; 15 Minutes; Microtox
testChub (fresh water) 60ppm/24H (lethal)
Fathead minnow LC50=115.7
mg/L/96H @ 22C. Rainbow trout LC50=230 mg/L/48H

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 10 Flammable.
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
R 42/43 May cause sensitization by inhalation and
skin contact.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 107-15-3: 2
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 107-15-3 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 107-15-3: OEL-AUSTRALIA:TWA 10 ppm (25 mg/m3)
OEL-BELGIUM:TWA 10 ppm (25 mg/m3)
OEL-DENMARK:TWA 10 ppm (25 mg/m3)
OEL-FINLAND:TWA 10 ppm (25 mg/m3);STEL 20 ppm (50 mg/m3)
OEL-FRANCE:TWA 10 ppm (25 mg/m3);STEL 15 ppm (35 mg/m3)
OEL-GERMANY:TWA 10 ppm (25 mg/m3)
OEL-JAPAN:TWA 10 ppm (25 mg/m3)
OEL-THE NETHERLANDS:TWA 10 ppm (25 mg/m3)
OEL-THE PHILIPPINES:TWA 10 ppm (25 mg/m3)
OEL-POLAND:TWA 2 mg/m3
OEL-RUSSIA:TWA 10 ppm;STEL 2 mg/m3
OEL-SWEDEN:TWA 10 ppm (25 mg/m3);STEL 15 ppm (35 mg/m3)
OEL-SWITZERLAND:TWA 10 ppm (25 mg/m3);STEL 20 ppm (50 mg/m3)
OEL-TURKEY:TWA 10 ppm (25 mg/m3)
OEL-UNITED KINGDOM:TWA 10 ppm (25 mg/m3)
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 107-15-3 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/10/1999 Revision #3 Date: 10/18/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
N-Phenylbis(trifluoromethane)sulfonimide, 97% 37595-74-7
4-Methoxy-M-Phenylenediamine Sulfate Hydrate, 98% 39156-41-7
mono-Methyl phthalate, 98% 4376-18-5
3-Bromobutyric acid, 97% 2623-86-1
n-Nonyltriphenylphosphonium bromide 60902-45-6
5-Bromo-4-chloro-3-indoxyl-??-D-fucopyranoside, 99% 17016-46-5
5-Isopropyl-2-methylphenol 499-75-2
9,9-Dimethyl-4,5-bis(diphenylphosphino)xanthene, 98% 161265-03-8
1-(4-Hydroxy-3-hydroxymethylphenyl)-2-(tert-butylbenzylamino)ethanol 24085-03-8
2-Ethyl-4-methylimidazole, 85% 616-47-7
3-Methylsulfolane 872-93-5
Cyclohexylmagnesium chloride, 1.3M solution in THF/toluene 108-88-3
Para red, dye content ca. 95% 6410-10-2
4-Chlorophenylmagnesium bromide, 0.9M solution in THF/toluene 108-88-3
4-Fluorophenylmagnesium bromide, 0.8M solution in THF 109-99-9
Diethylaluminiumchloride, 1.1M solution in toluene 96-10-6
Dimethylzinc, 1.2M solution in toluene 108-88-3
Lithium aluminium hydride, 2.4M solution in THF 109-99-9
Allylmagnesium chloride, 1.7M solution in THF 109-99-9
Tri-n-hexylaluminium, 0.4M in hexane 110-54-3
Diethylaluminium ethoxide, 1.3M solution in hexane 110-54-3
Methylmagnesium bromide, 1.7M solution in toluene/THF 75-16-1
Isopropylmagnesium chloride, 2.0M solution in THF 109-99-9
4,4'-Azobis(4-cyanovaleric acid), moistened with ca. 30% water, 97% 2638-94-0
3-Chloro-5-fluorobenzyl bromide, 97% 493024-39-8
3-Chloro-5-fluorobenzyl alcohol, 99% 79944-64-2
5-(4-Bromophenyl)furfural, 97% 20005-42-9
(s)-Glycidol 60456-23-7
5-(4-Nitrophenyl)furfural, 98% 7147-77-5
4-(1H-Pyrrol-1-yl)phenol, 97% 23351-09-9
2,2,5,5-Tetrakis(chloromethyl)cyclopentanone 67059-01-2
2,2,5,5-Tetrakis(hydroxymethyl)cyclopentanone 3322-70-1
Bis(trimethylsilyl)carbodiimide, 98% 1000-70-0
3-Methylbenzofuran-2-carbonyl chloride, 97% 2256-86-2
Metergoline 17692-51-2
3-Chloro-5-fluorobenzoic acid, 97% 25026-64-6
3-Chloro-5-fluorophenylacetic acid 202001-00-1
4-Fluoro-3-methylbenzaldehyde 135427-08-6
3-Chloro-5-fluorobenzaldehyde, 97% 90390-49-1
3-Chloro-2-fluorobenzaldehyde, 97% 85070-48-0
4-Fluoro-2-(trifluoromethyl)benzylamine 202522-22-3
4-Fluoro-3-(trifluoromethyl)benzylamine 67515-74-6
3-Chloro-5-fluoroaniline, 97% 4863-91-6
3-Fluoro-4-methoxyaniline, 99% 366-99-4
5-Fluoro-2-methylphenyl isocyanate, 97% 67191-93-9
1-(4-Fluorobenzyl)piperazine, 98% 70931-28-1
2,4,5-Trifluorobenzoic acid, 99.5+% 446-17-3
3-Chloro-5-fluorobenzonitrile, 98% 327056-73-5
3-Chloro-5-fluorophenyl acetonitrile, 98% 493038-93-0
Ethylenediamine Anhydrous 107-15-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net