Search   
MSDS 
:
 Cyclohexene, 99%
CAS 
:
 110-83-8
SYNONYMS 
:
 Benzenetetrahydride 1,2,3,4-Tetrahydrobenzene
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 110-83-8 |Cyclohexene | 99.0 | 203-807-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11 19 21/22 65

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. May form explosive peroxides. Harmful in contact
with skin and if swallowed. Harmful: may cause lung damage if
swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause central
nervous system depression, characterized by excitement, followed by
headache, dizziness, drowsiness, and nausea. Advanced stages may
cause collapse, unconsciousness, coma and possible death due to
respiratory failure. May be harmful if swallowed.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Causes respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause defatting and
dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Use water spray to keep fire-exposed containers cool. Extremely
flammable liquid and vapor. Vapor may cause flash fire. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. May form explosive peroxides. Vapors may be
heavier than air. They can spread along the ground and collect in
low or confined areas. Will be easily ignited by heat, sparks or
flame. Vapors may form an explosive mixture with air. Containers may
explode if exposed to fire.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. This material is lighter than
water and insoluble in water. The fire could easily be spread by the
use of water in an area where the water cannot be contained. Do NOT
use straight streams of water. For large fires, use dry chemical,
carbon dioxide, alcohol-resistant foam, or water spray. Cool
containers with flooding quantities of water until well after fire is
out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors. Water spray may
reduce vapor but may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. If peroxide formation is suspected,
do not open or move container. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Do not store in direct sunlight. Store in a tightly closed
container. Keep from contact with oxidizing materials. Store in a
cool, dry, well-ventilated area away from incompatible substances.
Containers should be dated when opened and tested periodically for
the presence of peroxides. Should crystals form in a peroxidizable
liquid, peroxidation may have occurred and the product should be
considered extremely dangerous. In this instance, the container
should only be opened remotely by professionals. All peroxidizable
substances should be stored away from heat and light and be
protected from ignition sources.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate general or local exhaust
ventilation to keep airborne concentrations below the permissible
exposure limits.
Exposure Limits
CAS# 110-83-8:
United States OSHA: 300 ppm TWA; 1015 mg/m3 TWA
Belgium - TWA: 300 ppm VLE; 1025 mg/m3 VLE
France - VME: 300 ppm VME; 1015 mg/m3 VME
Germany: 300 ppm TWA; 1000 mg/m3 TWA
Malaysia: 300 ppm TWA; 1010 mg/m3 TWA
Netherlands: 300 ppm MAC; 1015 mg/m3 MAC
Russia: 50 mg/m3 TWA
Spain: 300 ppm VLA-ED; 1020 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Sweetish odor.
pH: Not available.
Vapor Pressure: 75 mm Hg @20C
Viscosity: Not available.
Boiling Point: 83 deg C @ 760.00mm Hg
Freezing/Melting Point: - 104.00 - - 0.00 deg
Autoignition Temperature: 250 deg C ( 482.00 deg F)
Flash Point: -20 deg C ( -4.00 deg F)
Explosion Limits, lower: 1.30 vol %
Explosion Limits, upper: 7.70 vol %
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .8110g/cm3
Molecular Formula: C6H10
Molecular Weight: 82.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Under normal storage conditions, peroxidizable compounds can form
and accumulate peroxides which may explode when subjected to heat or
shock. This material is most hazardous when peroxide levels are
concentrated by distillation or evaporation.
Conditions to Avoid:
Incompatible materials, light, ignition sources, oxidizers.
Incompatibilities with Other Materials:
Oxidizing agents and acids..
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-83-8: GW2500000
LD50/LC50:
CAS# 110-83-8: Dermal, guinea pig: LD50 = >20 mL/kg; Inhalation,
mouse: LC50 = 50000 mg/m3; Oral, mouse: LD50 = >3200 uL/kg; Oral,
mouse: LD50 = 2300 mg/kg; Oral, rat: LD50 = 2400 uL/kg; Oral, rat:
LD50 = 1300 mg/kg.
Oral, mice: LD50 = 3.2 mL/kg
Carcinogenicity:
Cyclohexene -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CYCLOHEXENE
Hazard Class: 3
UN Number: 2256
Packing Group: II
IMO
Shipping Name: CYCLOHEXENE
Hazard Class: 3.1
UN Number: 2256
Packing Group: II
RID/ADR
Shipping Name: CYCLOHEXENE
Hazard Class: 3
UN Number: 2256
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
R 19 May form explosive peroxides.
R 21/22 Harmful in contact with skin and if
swallowed.
R 65 Harmful: may cause lung damage if swallowed.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 110-83-8: 1
Canada
CAS# 110-83-8 is listed on Canada's DSL List.
CAS# 110-83-8 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-83-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/04/1998 Revision #4 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(S)-3-Acetoxy-gamma-butyrolactone, 97% 191403-65-3
3-Chlorosalicylic Acid, 98% 1829-32-9
N-BOC-O-Benzyl-L-Serine, 98% 23680-31-1
N-BOC-O-Benzyl-D-Serine, 98% 47173-80-8
(1R,2R)-2-Amino-1-Phenylpropane-1,3-Diol 46032-98-8
4,5-Dimethoxy-2-Nitrobenzoic Acid, 98% 4998-07-6
(S)-(-)-2-(Carbobenzyloxyamino)-3-Phenyl-1-Propanol, 98% 6372-14-1
Tetracyanoethylene, 98% 670-54-2
2,5-Lutidine, 97% 589-93-5
(S)-1,2,3,4-Tetrahydroisoquinolylmethan-3-ol 0-01-1
Gamma-L-Glutamyl-L-Alanine 5875-41-2
Ethyl (3S)-4-Bromo-3-Hydroxybutanoate, 90% 95537-36-3
Albumin from Eggs 9006-50-2
Cyclohexane, 99+%, Spectrophotometric Grade 110-82-7
Cyclohexanol, 98% 108-93-0
Cyclohexene, 99% 110-83-8
L-Valine Ethyl Ester Hydrochloride, 99% 17609-47-1
D-(-)-Fructose, P.A. 57-48-7
D-(-)-Ribose, 99.5+% 50-69-1
Ethyl (R)-Nipecotate L-Tartarate, 97% 167392-57-6
D-Sorbitol, P.A. 50-70-4
Diethylphosphonoacetic Acid 3095-95-2
N-[(S)-(+)-Ethoxycarbonyl)-3-Phenylpropyl]-L-Alanine, 97% 82717-96-2
D-(+)-Xylose, p.a. 58-86-6
Dansyl Chloride, 98% 605-65-2
Diethyl(4-Nitrobenzyl)Phosphonate 0-01-1
4-tert-Amylcalix(8)Arene 93503-77-6
Decahydronaphthalene, spectro grade, 98% (GC) 91-17-8
4-tert-Butylcalix(6)Arene Hexaacetic Acid Hexaethyl Ester 92003-62-8
Rubicene 197-61-5
4-tert-Butylcalix(4)Arene Tetraacetic Acid 113215-72-8
4-tert-Butylcalix(8)Arene Octaacetic Acid Octaethyl Ester 92003-63-9
N-[3-(Acetylthio)-(2S)-Methyl-1-Oxopropyl]-L-Proline Hydrate, 97% 64838-55-7
(1S,2S)-2-Amino-1-(4-Nitrophenyl)Propane-1,3-Diol, 96% 2964-48-9
2-Bromo-5-nitroaniline, 98% 10403-47-1
2-Hydroxyethyl stearate, 95% 111-60-4
4-Isopropylbenzaldehyde, 98% 122-03-2
Citric acid, trilithium salt tetrahydrate, 98% 919-16-4
D(+)-Glucose, reagent ACS, anhydrous 50-99-7
Di-n-Butylamine, p.a. 111-92-2
(Carbomethoxymethyl)triphenylphosphonium chloride, 97% 2181-97-7
Talc 14807-96-6
Ammonium Oxalate, Monohydrate, Reagent ACS (Crystals) 1113-38-8
(2-Hydroxyethyl)triphenylphosphonium bromide, 98% 7237-34-5
3-Endo-Aminobicyclo??2.2.1??Hept-5-ene-2- Endo-Carboxylic Acid, 98% 88330-29-4
Dibutyl phthalate 84-74-2
Dimethyl Allylphosphonate, 97% 757-54-0
Diethanolamine, 99% 111-42-2
Diethyl Phthalate,99% 84-66-2
3,5-Dibenzyloxybenzyl Alcohol 24131-31-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net