Search   
MSDS 
:
 4-Acetylpyridine, 98%
CAS 
:
 1122-54-9
SYNONYMS 
:
 Methyl 4-pyridyl ketone
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1122-54-9 |4-Acetylpyridine | 98.0 | 214-350-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to skin.The toxicological properties of this material
have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting
unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Get medical aid.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may be heavier than air. They can spread
along the ground and collect in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1122-54-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: 1 mbar @ 20 deg C
Viscosity: Not available.
Boiling Point: 212 deg C @ 760.00mm Hg
Freezing/Melting Point: 13 - 16 deg C
Autoignition Temperature: Not available.
Flash Point: 104 deg C ( 219.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: 1.0950g/cm3
Molecular Formula: (C5H4N)COCH3
Molecular Weight: 121.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stability unknown.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, strong reducing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1122-54-9: OB5426000
LD50/LC50:
Not available.
Carcinogenicity:
4-Acetylpyridine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Bacteria: Phytobacterium phosphoreum: EC50 = 231-247 mg/L; 5,15,30
minutes; Microtox test

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 38 Irritating to skin.
Safety Phrases:
S 37 Wear suitable gloves.
WGK (Water Danger/Protection)
CAS# 1122-54-9: 2
Canada
CAS# 1122-54-9 is listed on Canada's NDSL List.
CAS# 1122-54-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1122-54-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/09/1999 Revision #2 Date: 12/03/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Diacetin (Pract), 98% (GC) 25395-31-7
D-(+)-Ribonic acid gamma-lactone, 96% 5336-08-3
Gamma-Valerolactone, 98% 108-29-2
Tri-Normal-Octylamine, 98% 1116-76-3
1,8-Diazabicyclo[5.4.0]undec-7-ene, 98% 6674-22-2
2-Phenyl-4-Quinolinecarboxylic Acid, 99% 132-60-5
Methylnorbornene-2,3-dicarboxylic anhydride 95%, mixture of isomers 25134-21-8
Ruthenium, powder,-200 mesh, 99.9% 7440-18-8
Lauryl gallate, 96+% 1166-52-5
2-Chloro-4-fluoro-5-methylaniline, 99.5+% 116759-33-2
Glycolic acid, 67% in water 79-14-1
Methyl Green, zinc chloride salt, high purity biological stain 7114-03-6
Rubidium Hydroxide, 99.9%, 50 wt% Solution in Water 1310-82-3
3-Iodopropionic Acid, 98% 141-76-4
Adenosine 5'-triphosphate disodium salt, trihydrate, 99% (HPLC) 987-65-5
Methyl-d3-amine hydrochloride, 98+ atom % D 593-51-1
Esculin Monohydrate, 97% 531-75-9
Quinoline Yellow, Spirit Soluble, 95% 8003-22-3
Pseudothiohydantoin, 97% 556-90-1
DL-Ethyl 2-bromovalerate, 99% 615-83-8
Calcium oxalate monohydrate, 98% 563-72-4
Potassium formate (pract) 590-29-4
4-Acetylpyridine, 98% 1122-54-9
4-Phosphonooxy-tempo hydrate, free radical 22690-04-6
4-Decylbenzoyl Chloride, 98% (Titr.) 54256-43-8
Trichloroacetyl chloride 76-02-8
3-Carbamoyl-2,2,5,5-tetramethyl-3- pyrrolin-1-yloxy, free radical 3229-73-0
2-Thiophenesulfonyl chloride 16629-19-9
1,10-Diiododecane, 97% 16355-92-3
2,3,4-Trihydroxybenzaldehyde, 98% (titr.) 2144-08-3
Thulium atomic absorption standard solution, 1 mg/ml Tm in 2% HNO3 7440-30-4
Sodium Polyanetholesulfonate 52993-95-0
Tetraphenylphosphonium Iodide, 99% 2065-67-0
2,3-Dichloro-1-propene, 98% 78-88-6
N-Cyanoimido-S,S-Dimethyl-Dithiocarbonate ca. 90%, Remainder Water 7732-18-5
9-Fluorenone-2-Carboxylic Acid, 97% (GC) 784-50-9
3-(3,4-Dimethoxyphenyl)-Propionic Acid, 99% 2107-70-2
1-Phenyl-1,3,8-Triazaspiro(4,5) Decan-- 4-One, 95% (TLC) 1021-25-6
Cycloheptylamine, 99% 5452-35-7
3,3-Dimethylglutarimide, 99% 1123-40-6
Alpha-d-Methylglucoside, 99% 97-30-3
D-(-)-2-Aminobutyric Acid, 99+% 2623-91-8
3-Hydroxytetrahydrofuran, 97% 453-20-3
p-Aminohippuric acid, sodium salt, monohydrate 98% 94-16-6
Pentafluorobenzoic acid, 99% 602-94-8
Anthraquinone-2-sulfonic acid, sodium salt monohydrate, 90% 131-08-8
5-Chlorosalicylic acid, 98% 321-14-2
Fluoranthene, 98% 206-44-0
N-(4-Methoxybenzylidene)-4-Butylaniline, 99% (Titr.) 26227-73-6
Hydroxypropyl Methyl Cellulose 9004-65-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net