Search   
MSDS 
:
 MOPS
CAS 
:
 1132-61-2
SYNONYMS 
:
 3-(N-morpholino) propansulfonic acid; Morpholinepropanesulfonic acid.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1132-61-2 |MOPS | 99.0 | 214-478-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Combustion generates toxic fumes.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. May form flammable
dust-air mixtures. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Not available.
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents - strong bases.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon
dioxide.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1132-61-2: QE9104530
LD50/LC50:
Not available.
Carcinogenicity:
MOPS -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 1132-61-2: 2
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1132-61-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 1132-61-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/12/1999 Revision #3 Date: 12/01/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
6-Amino-2-Naphthoic Acid, 90% 11668-47-4
Zirconium (IV) Oxide, P.A. 1314-23-4
cis-Dichlorodiamineplatinum(II), 99.99% 15663-27-1
1-Bromonaphthalene 96%, contains max. 2% 2-bromonaphthalene 90-11-9
1-Heptanesulfonic acid, sodium salt, monohydrate, HPLC grade 207300-90-1
1-Hexanesulfonic acid sodium salt, HPLC grade 2832-45-3
5-Bromo-1-pentene, 96% 1119-51-3
2,6-Diphenylphenol 2432-11-3
L-Cystine 56-89-3
1-Pentanesulfonic Acid, Sodium Salt Monohydrate, HPLC Grade 22767-49-3
1,1,2-Trichloroethane Density Standard 79-00-5
2-Ethoxyethanol, 99% 110-80-5
Antimony Trichloride 10025-91-9
2-Ethoxyethyl acetate 99% 111-15-9
DL-2-Octanol, 97% 123-96-6
2,2,2-Trifluoroethanol 75-89-8
5-Amino-2-methylindole, 98% 7570-49-2
Bromoacetaldehyde Diethyl Acetal, 97% 2032-35-1
2-Acetylcyclohexanone, 97% 874-23-7
Lauric acid, 98% 143-07-7
4-Methoxy-2-nitroaniline, 98% 96-96-8
1-Nitroso-2-naphthol-3,6-disulfonic acid disodium salt 0-00-0
Toluidine Blue O Zinc Chloride Double Salt 0-01-1
2,4,6-Triphenylpyrylium Chloride, 90% 40836-01-9
2-Isopropoxyethanol, 98% 109-59-1
2,6-Difluorobenzoyl Isocyanate 60731-73-9
1-(4-Chlorophenyl)-1-Cyclopropane- Carboxylic Acid, 99% 72934-37-3
1-Bromo-1-propene, mixture of isomers, 95% 590-14-7
3-Aminopyrrolidine Dihydrochloride 103831-11-4
2,2,4-Trimethylpentane, p.a. 540-84-1
Phenyl Salicylate, 99% (UV-Vis) 118-55-8
MOPS 1132-61-2
P-Naphtholbenzein, 90+% (UV-VIS) 145-50-6
1-Amino-4-Hydroxyanthraquinone, 96% 116-85-8
4-Aminoantipyrine, 98% 83-07-8
Sodium metatungstate, 2.82 density solution in water, stabilized 7732-18-5
8-Hydroxyquinoline, p.a. 148-24-3
3-Methyl-2-Cyclohexen-1-One, 98% 1193-18-6
Cerium(IV) sulfate tetrahydrate 10294-42-5
Sodium metatungstate hydrate, crystalline 12141-67-2
O-Methylbenzyl Cyanide, 98% 22364-68-7
l(-)-Glutathione, oxidized, hydrate, 95% 27025-41-8
Antimony Trioxide 1309-64-4
Dibutyl L-Tartrate 87-92-3
(-)-Terpinen-4-ol, 97% 562-74-3
3,5-Dinitrosalicylic Acid Monosodium Salt, Monohydrate, 97% (Titr.) 46506-88-1
4-Tert.-Butyl-Calix[4]arene-Crown-4-Complex 171058-95-0
4-Tert.-Butyl-Calix[4]Arene-Crown-5-Complex 99314-01-9
4-Tert.-Butyl-Calix[4]Arene-Crown-6-Complex 129518-51-0
2,3,4,5-Tetrafluoro-6-nitrobenzoic acid 16583-08-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net