Search   
MSDS 
:
 1-Hexanesulfonic acid sodium salt, HPLC grade
CAS 
:
 2832-45-3
SYNONYMS 
:
 Sodium 1-hexanesulfonate; Sodium hexylsulfonate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2832-45-3 |1-Hexanesulfonic acid, sodium salt | >98 | 220-601-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. Prolonged and/or repeated contact may cause
irritation and/or dermatitis. The toxicological properties of this
material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Dust is irritating to the respiratory tract. May cause respiratory
tract irritation. The toxicological properties of this substance have
not been fully investigated.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2832-45-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Moderately soluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: CH3(CH2)5SO3Na
Molecular Weight: 188.22

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2832-45-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Hexanesulfonic acid, sodium salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2832-45-3: 2
Canada
CAS# 2832-45-3 is listed on Canada's DSL List.
CAS# 2832-45-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2832-45-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/16/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
6-Amino-2-Naphthoic Acid, 90% 11668-47-4
Zirconium (IV) Oxide, P.A. 1314-23-4
cis-Dichlorodiamineplatinum(II), 99.99% 15663-27-1
1-Bromonaphthalene 96%, contains max. 2% 2-bromonaphthalene 90-11-9
1-Heptanesulfonic acid, sodium salt, monohydrate, HPLC grade 207300-90-1
1-Hexanesulfonic acid sodium salt, HPLC grade 2832-45-3
5-Bromo-1-pentene, 96% 1119-51-3
2,6-Diphenylphenol 2432-11-3
L-Cystine 56-89-3
1-Pentanesulfonic Acid, Sodium Salt Monohydrate, HPLC Grade 22767-49-3
1,1,2-Trichloroethane Density Standard 79-00-5
2-Ethoxyethanol, 99% 110-80-5
Antimony Trichloride 10025-91-9
2-Ethoxyethyl acetate 99% 111-15-9
DL-2-Octanol, 97% 123-96-6
2,2,2-Trifluoroethanol 75-89-8
5-Amino-2-methylindole, 98% 7570-49-2
Bromoacetaldehyde Diethyl Acetal, 97% 2032-35-1
2-Acetylcyclohexanone, 97% 874-23-7
Lauric acid, 98% 143-07-7
4-Methoxy-2-nitroaniline, 98% 96-96-8
1-Nitroso-2-naphthol-3,6-disulfonic acid disodium salt 0-00-0
Toluidine Blue O Zinc Chloride Double Salt 0-01-1
2,4,6-Triphenylpyrylium Chloride, 90% 40836-01-9
2-Isopropoxyethanol, 98% 109-59-1
2,6-Difluorobenzoyl Isocyanate 60731-73-9
1-(4-Chlorophenyl)-1-Cyclopropane- Carboxylic Acid, 99% 72934-37-3
1-Bromo-1-propene, mixture of isomers, 95% 590-14-7
3-Aminopyrrolidine Dihydrochloride 103831-11-4
2,2,4-Trimethylpentane, p.a. 540-84-1
Phenyl Salicylate, 99% (UV-Vis) 118-55-8
MOPS 1132-61-2
P-Naphtholbenzein, 90+% (UV-VIS) 145-50-6
1-Amino-4-Hydroxyanthraquinone, 96% 116-85-8
4-Aminoantipyrine, 98% 83-07-8
Sodium metatungstate, 2.82 density solution in water, stabilized 7732-18-5
8-Hydroxyquinoline, p.a. 148-24-3
3-Methyl-2-Cyclohexen-1-One, 98% 1193-18-6
Cerium(IV) sulfate tetrahydrate 10294-42-5
Sodium metatungstate hydrate, crystalline 12141-67-2
O-Methylbenzyl Cyanide, 98% 22364-68-7
l(-)-Glutathione, oxidized, hydrate, 95% 27025-41-8
Antimony Trioxide 1309-64-4
Dibutyl L-Tartrate 87-92-3
(-)-Terpinen-4-ol, 97% 562-74-3
3,5-Dinitrosalicylic Acid Monosodium Salt, Monohydrate, 97% (Titr.) 46506-88-1
4-Tert.-Butyl-Calix[4]arene-Crown-4-Complex 171058-95-0
4-Tert.-Butyl-Calix[4]Arene-Crown-5-Complex 99314-01-9
4-Tert.-Butyl-Calix[4]Arene-Crown-6-Complex 129518-51-0
2,3,4,5-Tetrafluoro-6-nitrobenzoic acid 16583-08-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net