Search   
MSDS 
:
 Tetrabromophenolphthalein Ethyl Ester, Reagent ACS, 95+% (UV-VIS)
CAS 
:
 1176-74-5
SYNONYMS 
:
 Bromophthalein magenta E; Benzoic acid,     2-(3,5-dibromo-4-hydroxyphenyl).
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1176-74-5 |Tetrabromophenolphthalein Ethyl Ester | 95.0+ | 214-645-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.Light sensitive.Air sensitive.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Do not store in direct sunlight. Store in a tightly closed
container. Store in a cool, dry area away from incompatible
substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1176-74-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow-red
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 208.00 - 211.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C22H14Br4O4
Molecular Weight: 661.96

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Air sensitive. Light
sensitive.
Conditions to Avoid:
Incompatible materials, light, dust generation, exposure to air.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1176-74-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tetrabromophenolphthalein Ethyl Ester -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 1176-74-5: 1
Canada
CAS# 1176-74-5 is listed on Canada's DSL List.
CAS# 1176-74-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1176-74-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/03/1999 Revision #2 Date: 8/09/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2,6,6-Tetramethyl-4-Piperidinol, 99% 2403-88-5
S-(+)-2-Pentanol, 98+% 26184-62-3
5-Amino-1,3,4-thiadiazole-2-thiol, 98% 2349-67-9
Tetrabromophenolphthalein Ethyl Ester, Reagent ACS, 95+% (UV-VIS) 1176-74-5
1,1,1,3,3,3-Hexafluoroisopropanol-d2, 99+ atom% d 38701-74-5
4-(Trifluoromethoxy)benzoic acid, 99% (titr.) 330-12-1
Digoxin, 95.0 to 101.0% (HPLC), Calculated on a Dry Basis 20830-75-5
6-Azauracil, 99% 461-89-2
5-Azacytidine, 99% 320-67-2
6-Undecanone, 97% 927-49-1
2-Nitrosotoluene, 97% 611-23-4
Guanidine sulfate, 99% 593-87-3
5-Bromosalicylic Acid, 98% 89-55-4
n-Ethylhydroxylamine hydrochloride,97% 42548-78-7
2,3,4,6-Tetra-o-acetyl-betha-d-glucopyranosyl azide, 98% 13992-25-1
Silver chromate, 99% 7784-01-2
1,2-O-Cyclohexylidene-3-O-Methyl-Alpha-D-Glucofuranose, 98% 13322-87-7
5-Bromo-2'-Deoxyuridine, 99+% 59-14-3
2-Chloro-4'-fluoroacetophenone, 99% 456-04-2
Furfuryl acetate, 99% 623-17-6
1,5-Anhydro-3,4,6-Tri-O-Benzyl-2-Deoxy-D-Arabinohex-1-Enitol, 99+% 55628-54-1
Chlorodiphenylmethane, 98% 90-99-3
Diethylbenzene (Techn), 90% (GC) 7732-18-5
2,5-Dimethoxy-4-Nitroaniline, 98+% 6313-37-7
7-Amino-1,3-Naphthalenedisulfonic Acid, Tech. 86-65-7
1,7-Diaza-12-Crown-4, 98% 294-92-8
n-Acetylneuraminic acid 131-48-6
4-Methylsulphonylbenzenesulphonyl Chloride 95% 82964-91-8
1,4-Naphthoquinone, 99% (UV-Vis) 130-15-4
Triacetin, 99% 102-76-1
Methyl 4-Nitrobenzoate, 99+% 619-50-1
Lauryl methacrylate, 65% 142-90-5
Palatine Fast Black Wan 5610-64-0
Benzyl carbamate, 99% 621-84-1
2,2-Diethoxyacetophenone, 98% 6175-45-7
2-Isopropenylaniline, 98+% 52562-19-3
5-Methylsalicylic acid, 98% 89-56-5
(2R,3S)-1-Carboxy-4-Isopropyl-2,3-Dihydroxycyclohexa-4,6-Diene, 0-01-1
Glycinamide Hydrochloride, 98% 1668-10-6
L-(+)-Gulose, 98% 6027-89-0
2'-Chloroacetanilide, 99+% 533-17-5
2-Chloro-3,5-Dibromo-1-Fluorobenzene, 98% 0-00-1
p-Toluidine 106-49-0
DL-5-Methyltryptophan, 98% 951-55-3
Methyl disulfide, p.a. 624-92-0
2-Chloroadenosine hemihydrate, 97% 146-77-0
Diphenylacetonitrile, 99+% 86-29-3
1,4-Di-tert-butylbenzene, 99% 1012-72-2
2-Nitrobenzamide, 98% 610-15-1
Tetrakis(dimethylamino)ethylene, 98% 996-70-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net