Search   
MSDS 
:
 Chlorodiphenylmethane, 98%
CAS 
:
 90-99-3
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 90-99-3 |Chlorodiphenylmethane | 98.0 | 202-031-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Lachrymator (substance which increases the flow of
tears).Corrosive.

Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye
burns. Lachrymator (substance which increases the flow of tears).
May cause chemical conjunctivitis and corneal damage. May cause
chemical conjunctivitis.
Skin:
May cause severe irritation and possible burns. May cause skin rash
(in milder cases), and cold and clammy skin with cyanosis or pale
color.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes gastrointestinal tract burns. May cause perforation
of the digestive tract. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Aspiration may lead to
pulmonary edema. May cause systemic effects. Can produce delayed
pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Immediately
flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Wash clothing before reuse.
Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid. Get medical aid immediately. Do
NOT induce vomiting. If conscious and alert, rinse mouth and drink
2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. Do NOT use mouth-to-mouth resuscitation. If
breathing has ceased apply artificial respiration using oxygen and a
suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not get in eyes, on skin, or on
clothing. Keep container tightly closed. Do not ingest or inhale. Use
with adequate ventilation. Wash clothing before reuse. Discard
contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 90-99-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 140 deg C @ 3.00mm Hg
Freezing/Melting Point: 15.00 - 17.00 deg C
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1400g/cm3
Molecular Formula: C13H11Cl
Molecular Weight: 202.68

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
None reported.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 90-99-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Chlorodiphenylmethane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 90-99-3: No information available.
Canada
CAS# 90-99-3 is listed on Canada's NDSL List.
CAS# 90-99-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 90-99-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,2,6,6-Tetramethyl-4-Piperidinol, 99% 2403-88-5
S-(+)-2-Pentanol, 98+% 26184-62-3
5-Amino-1,3,4-thiadiazole-2-thiol, 98% 2349-67-9
Tetrabromophenolphthalein Ethyl Ester, Reagent ACS, 95+% (UV-VIS) 1176-74-5
1,1,1,3,3,3-Hexafluoroisopropanol-d2, 99+ atom% d 38701-74-5
4-(Trifluoromethoxy)benzoic acid, 99% (titr.) 330-12-1
Digoxin, 95.0 to 101.0% (HPLC), Calculated on a Dry Basis 20830-75-5
6-Azauracil, 99% 461-89-2
5-Azacytidine, 99% 320-67-2
6-Undecanone, 97% 927-49-1
2-Nitrosotoluene, 97% 611-23-4
Guanidine sulfate, 99% 593-87-3
5-Bromosalicylic Acid, 98% 89-55-4
n-Ethylhydroxylamine hydrochloride,97% 42548-78-7
2,3,4,6-Tetra-o-acetyl-betha-d-glucopyranosyl azide, 98% 13992-25-1
Silver chromate, 99% 7784-01-2
1,2-O-Cyclohexylidene-3-O-Methyl-Alpha-D-Glucofuranose, 98% 13322-87-7
5-Bromo-2'-Deoxyuridine, 99+% 59-14-3
2-Chloro-4'-fluoroacetophenone, 99% 456-04-2
Furfuryl acetate, 99% 623-17-6
1,5-Anhydro-3,4,6-Tri-O-Benzyl-2-Deoxy-D-Arabinohex-1-Enitol, 99+% 55628-54-1
Chlorodiphenylmethane, 98% 90-99-3
Diethylbenzene (Techn), 90% (GC) 7732-18-5
2,5-Dimethoxy-4-Nitroaniline, 98+% 6313-37-7
7-Amino-1,3-Naphthalenedisulfonic Acid, Tech. 86-65-7
1,7-Diaza-12-Crown-4, 98% 294-92-8
n-Acetylneuraminic acid 131-48-6
4-Methylsulphonylbenzenesulphonyl Chloride 95% 82964-91-8
1,4-Naphthoquinone, 99% (UV-Vis) 130-15-4
Triacetin, 99% 102-76-1
Methyl 4-Nitrobenzoate, 99+% 619-50-1
Lauryl methacrylate, 65% 142-90-5
Palatine Fast Black Wan 5610-64-0
Benzyl carbamate, 99% 621-84-1
2,2-Diethoxyacetophenone, 98% 6175-45-7
2-Isopropenylaniline, 98+% 52562-19-3
5-Methylsalicylic acid, 98% 89-56-5
(2R,3S)-1-Carboxy-4-Isopropyl-2,3-Dihydroxycyclohexa-4,6-Diene, 0-01-1
Glycinamide Hydrochloride, 98% 1668-10-6
L-(+)-Gulose, 98% 6027-89-0
2'-Chloroacetanilide, 99+% 533-17-5
2-Chloro-3,5-Dibromo-1-Fluorobenzene, 98% 0-00-1
p-Toluidine 106-49-0
DL-5-Methyltryptophan, 98% 951-55-3
Methyl disulfide, p.a. 624-92-0
2-Chloroadenosine hemihydrate, 97% 146-77-0
Diphenylacetonitrile, 99+% 86-29-3
1,4-Di-tert-butylbenzene, 99% 1012-72-2
2-Nitrobenzamide, 98% 610-15-1
Tetrakis(dimethylamino)ethylene, 98% 996-70-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net