Search   
MSDS 
:
 Allylpalladium chloride dimer, 98%
CAS 
:
 12012-95-2
SYNONYMS 
:
 Allyl palladium chloride dimer
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 12012-95-2 |Allylpalladium chloride dimer | 98 | 234-579-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes and skin.Air sensitive.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes severe skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. May cause burning sensation,
coughing, wheezing, laryngitis, shortness of breath, headache,
nausea, and vomiting. Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT get water inside containers. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Provide ventilation. Place under an inert atmosphere. Do
not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Use with adequate ventilation. Handle
under an inert atmosphere. Store protected from air. Do not allow
contact with water. Use only in a chemical fume hood. Keep from
contact with moist air and steam. Do not breathe dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Do not expose
to air. Store protected from moisture. Store under an inert
atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 12012-95-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 160 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: decomposes
Specific Gravity/Density: Not available.
Molecular Formula: C6H10Cl2Pd2
Molecular Weight: 365.84

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. May decompose on exposure to moist air or
water.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, moisture, air.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, chloride fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 12012-95-2: RT3510000
LD50/LC50:
CAS# 12012-95-2: Draize test, rabbit, skin: 100 mg/24H Severe.
Carcinogenicity:
Allylpalladium chloride dimer -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 12012-95-2: 0
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 12012-95-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12012-95-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Cyclohexanediol (Mixture of Cis and Trans), 98% 931-17-9
Boc-On 58632-95-4
N, N'-Diisopropylcarbodiimide 693-13-0
4-Dimethylaminopyridine 1122-58-3
1-Hydroxybenzotriazole Monohydrate 80029-43-2
CytoScint Liquid Scintillation Fluid 92-71-7
1-(4-Methylphenyl)-1-cyclohexanecarbonitrile, 97% 1206-13-9
Trimethyloxonium Tetrafluoroborate 420-37-1
Iodoacetic acid, 99% (titr.) 64-69-7
(S)-2-Hydroxy-3-buten-1-yl p-tosylate, 99% (gc) 133095-74-6
D-(+)-Pantothenic Acid Calcium Salt 137-08-6
Indol-3-ylacetic Acid 87-51-4
Ampicillin Trihydrate 7177-48-2
Kanamycin Sulfate 25389-94-0
Gentamycin Sulfate 1405-41-0
Amphotericin B 1397-89-3
17-Beta-Estradiol-3-Benzoate 50-50-0
N-(1-Naphthyl)Ethylenediamine Dihydrochloride 1465-25-4
2-Hydroxy-p-Naphthoquinone, tech. 83-72-7
5-Nitroindazole, p.a. 5401-94-5
Violuric acid, 95% (uv-vis) 87-39-8
N-(p-nitrobenzoyl)-l-glutamic acid hemi- hydrate, 98% 6758-40-3
Benzyl ethyl malonate 42998-51-6
Acrylamide/Bisacrylamide 79-06-1
Glyoxal 40% Aqueous Solution 107-22-2
TBE Buffer Mix 77-86-1
SDS-PAGE-Buffer Mix 56-40-6
3,4-Dibenzyloxybenzyl Chloride 1699-59-8
4-Chloro-1-Naphthol 604-44-4
Hybridization Cocktail, 50% Formamide 75-12-7
Dextran Sulfate Sodium Salt 9011-18-1
Dextran 9004-54-0
DEAE Dextran 9015-73-0
5-Bromo-4-Chloro-3-Indolyl-Phosphate p-Toluidine Salt 6578-06-9
5-Bromo-4-Chloro-3-Indolyl Beta-D-Galactoside 7240-90-6
Isopropyl-beta-d-thiogalactopyranoside, 99+% cont. ca 15% 1,4-dioxan 123-91-1
(4S,2RS)-2-Ethylthiazolidine-4-Carboxylic Acid, 99% 0-01-1
Proteinase K 39450-01-6
Diethyl Ethylmalonate, 99% 133-13-1
d-Serine, 98% 312-84-5
Tetrabutylammonium phosphate premixed concentrate 5574-97-0
Octane-d18, 98+ atom % d 17252-77-6
Cystamine Dihydrochloride, 97% 56-17-7
Titanium(IV) n-butoxide , 99% 5593-70-4
Sulfuric Acid Solution 0.1N to 2.6 N 7664-93-9
Iridium(IV) oxide, ca 85% Ir (about 15% oxygen) 12030-49-8
5,6-Dichloro-1-ethyl-2-methyl-3-(3-sulfobutyl)benzimidazolium inner 63175-96-2
1,1,1-Trichloro-2-Methyl-2-Propanol, Hemi-Hydrate, 98% (Titr.) 57-15-8
Copper(II) Nitrate, 2.5-Hydrate, Reagent ACS (Crystals) 19004-19-4
Allylpalladium chloride dimer, 98% 12012-95-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net