Search   
MSDS 
:
 1-Hydroxybenzotriazole Monohydrate
CAS 
:
 80029-43-2
SYNONYMS 
:
 Benzotriazole 1-Hydroxy Hydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 80029-43-2 |1-Hydroxybenzotriazole Monohydrate | 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 11

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have
not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause lacrimation (tearing), blurred
vision, and photophobia. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation and possible burns.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Olfactory fatigue
may occur. Can produce delayed pulmonary edema.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air. Combustion generates toxic fumes. Dust
can be an explosion hazard when exposed to heat or flame. Flammable
solid. May burn rapidly with flare burning effect. May re-ignite
after fire is extinguished.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam. For large fires, use water spray, fog or regular
foam. Contact professional fire-fighters immediately. For small
fires, use dry chemical, carbon dioxide, sand, earth, water spray or
regular foam. Cool containers with flooding quantities of water until
well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Scoop up with a nonsparking tool, then place into
a suitable container for disposal. Avoid generating dusty
conditions. Remove all sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 80029-43-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: not available
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not applicable.
Freezing/Melting Point: 311-316F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C6H5N3O.H2O
Molecular Weight: 153.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess
heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 80029-43-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Hydroxybenzotriazole Monohydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 80029-43-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 80029-43-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 80029-43-2 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/12/1999 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1,2-Cyclohexanediol (Mixture of Cis and Trans), 98% 931-17-9
Boc-On 58632-95-4
N, N'-Diisopropylcarbodiimide 693-13-0
4-Dimethylaminopyridine 1122-58-3
1-Hydroxybenzotriazole Monohydrate 80029-43-2
CytoScint Liquid Scintillation Fluid 92-71-7
1-(4-Methylphenyl)-1-cyclohexanecarbonitrile, 97% 1206-13-9
Trimethyloxonium Tetrafluoroborate 420-37-1
Iodoacetic acid, 99% (titr.) 64-69-7
(S)-2-Hydroxy-3-buten-1-yl p-tosylate, 99% (gc) 133095-74-6
D-(+)-Pantothenic Acid Calcium Salt 137-08-6
Indol-3-ylacetic Acid 87-51-4
Ampicillin Trihydrate 7177-48-2
Kanamycin Sulfate 25389-94-0
Gentamycin Sulfate 1405-41-0
Amphotericin B 1397-89-3
17-Beta-Estradiol-3-Benzoate 50-50-0
N-(1-Naphthyl)Ethylenediamine Dihydrochloride 1465-25-4
2-Hydroxy-p-Naphthoquinone, tech. 83-72-7
5-Nitroindazole, p.a. 5401-94-5
Violuric acid, 95% (uv-vis) 87-39-8
N-(p-nitrobenzoyl)-l-glutamic acid hemi- hydrate, 98% 6758-40-3
Benzyl ethyl malonate 42998-51-6
Acrylamide/Bisacrylamide 79-06-1
Glyoxal 40% Aqueous Solution 107-22-2
TBE Buffer Mix 77-86-1
SDS-PAGE-Buffer Mix 56-40-6
3,4-Dibenzyloxybenzyl Chloride 1699-59-8
4-Chloro-1-Naphthol 604-44-4
Hybridization Cocktail, 50% Formamide 75-12-7
Dextran Sulfate Sodium Salt 9011-18-1
Dextran 9004-54-0
DEAE Dextran 9015-73-0
5-Bromo-4-Chloro-3-Indolyl-Phosphate p-Toluidine Salt 6578-06-9
5-Bromo-4-Chloro-3-Indolyl Beta-D-Galactoside 7240-90-6
Isopropyl-beta-d-thiogalactopyranoside, 99+% cont. ca 15% 1,4-dioxan 123-91-1
(4S,2RS)-2-Ethylthiazolidine-4-Carboxylic Acid, 99% 0-01-1
Proteinase K 39450-01-6
Diethyl Ethylmalonate, 99% 133-13-1
d-Serine, 98% 312-84-5
Tetrabutylammonium phosphate premixed concentrate 5574-97-0
Octane-d18, 98+ atom % d 17252-77-6
Cystamine Dihydrochloride, 97% 56-17-7
Titanium(IV) n-butoxide , 99% 5593-70-4
Sulfuric Acid Solution 0.1N to 2.6 N 7664-93-9
Iridium(IV) oxide, ca 85% Ir (about 15% oxygen) 12030-49-8
5,6-Dichloro-1-ethyl-2-methyl-3-(3-sulfobutyl)benzimidazolium inner 63175-96-2
1,1,1-Trichloro-2-Methyl-2-Propanol, Hemi-Hydrate, 98% (Titr.) 57-15-8
Copper(II) Nitrate, 2.5-Hydrate, Reagent ACS (Crystals) 19004-19-4
Allylpalladium chloride dimer, 98% 12012-95-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net