Search   
MSDS 
:
 Decane, 99+%
CAS 
:
 124-18-5
SYNONYMS 
:
 n-Decane
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 124-18-5 |Decane | 99+% | 204-686-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
Causes skin irritation. May be absorbed through the skin in harmful
amounts. Prolonged and/or repeated contact may cause defatting of
the skin and dermatitis. May cause cyanosis of the extremities.
Ingestion:
Aspiration hazard. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. Harmful or fatal if swallowed
Ingestion of large amounts may cause CNS depression.
Inhalation:
Inhalation of vapor may cause respiratory tract irritation. May
cause narcotic effects in high concentration. Aspiration may cause
respiratory swelling and pneumonitis. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. May
cause burning sensation in the chest.
Chronic:
Prolonged or repeated skin contact may cause defatting and
dermatitis. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire.
Flammable Liquid. Can release vapors that form explosive mixtures at
temperatures above the flashpoint. Use water spray to keep
fire-exposed containers cool. Water may be ineffective. Material is
lighter than water and a fire may be spread by the use of water.
Containers may explode in the heat of a fire. Flammable liquid and
vapor. Vapors may be heavier than air. They can spread along the
ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Absorb spill using an absorbent, non-combustible
material such as earth, sand, or vermiculite. Do not use combustible
materials such as sawdust. Use a spark-proof tool. Provide
ventilation. A vapor suppressing foam may be used to reduce vapors.
Water spray may reduce vapor but may not prevent ignition in closed
spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Do not pressurize, cut, weld, braze, solder, drill,
grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 124-18-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: mild odor - gasoline-like
pH: Not available.
Vapor Pressure: 1.43 mm Hg @ 25C
Viscosity: 0.92 cP
Boiling Point: 345 deg F
Freezing/Melting Point: -29.7 deg C
Autoignition Temperature: 410 deg F ( 210.00 deg C)
Flash Point: 115 deg F ( 46.11 deg C)
Explosion Limits, lower: 0.8
Explosion Limits, upper: 5.4
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 0.73 (water=1)
Molecular Formula: C10H22
Molecular Weight: 142.154

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, excess
heat.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 124-18-5: HD6550000
LD50/LC50:
CAS# 124-18-5: Inhalation, mouse: LC50 = 72300 mg/m3/2H; Inhalation,
mouse: LC50 = 72300 mg/m3/2H; Inhalation, rat: LC50 = >1369 ppm/8H.
Carcinogenicity:
Decane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND
EXPOSURE DATA."

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: n-DECANE
Hazard Class: 3
UN Number: 2247
Packing Group: III
IMO
Shipping Name: normal-DECANE
Hazard Class: 3.3
UN Number: 2247
Packing Group: III
RID/ADR
Shipping Name: n-DECANE
Hazard Class: 3
UN Number: 2247
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 23 Do not inhale gas/fumes/vapour/spray.
S 24 Avoid contact with skin.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 124-18-5: No information available.
Canada
CAS# 124-18-5 is listed on Canada's DSL List.
CAS# 124-18-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 124-18-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ninhydrin, reagent ACS 485-47-2
p-Nitrophenyl-alpha-D-Maltoside Hydrate, 99% 17400-77-0
Molybdenum(VI) oxide 1313-27-5
4-Nitrophenyl-alpha-D-Galactopyranoside. 7493-95-0
4-Methylumbelliferylphosphate disodium salt trihydrate, 99% 22919-26-2
4-Methylumbelliferyl palmitate, 99% 17695-48-6
Sodium cyanoborodeuteride, 98 atom % d 25895-62-9
Tetrabromo-O-Sulfobenzoic Acid Cyclic Anhydride, 95% 68460-01-5
4-Methylumbelliferyl-beta-D-glucopyranoside, 99% 18997-57-4
Sodium phosphate, monobasic monohydrate, reagent ACS (crystals) 7558-80-7
Methyl-alpha-D-galacatopyranoside, 98+% 3396-99-4
Morpholine, Reagent ACS, 99+% (Titr.) 110-91-8
N-Acetyl-L-Cysteine, 98% 616-91-1
N-Amyl Acetate, P.A. 628-63-7
1-Pentanol, 99% 71-41-0
(2-Hydroxyethyl)triphenylphosphonium chloride, 98% 23250-03-5
3-Indoxyl sulfate potassium salt 2642-37-7
Indoxyl-beta-D-glucuronide cyclohexylammonium salt 35804-66-1
n-Butyl acetate, spectrophotometric grade, 99+% 123-86-4
alpha-D-Galactose 1-phosphate dipotassium salt pentahydrate 19046-60-7
Glycine-7-amido-4-methylcoumarin hydrobromide 113728-13-5
N-Acetyl-L-tyrosine ethyl ester monohydrate, 99% 840-97-1
5-Bromo-6-Chloro-3-Indolyl-Beta-D-Galactopyranoside 93863-88-8
5-Bromo-4-Chloro-3-Indolyl-Beta-D-Glucuronide Cyclohexylammonium Salt 18656-96-7
5-Bromo-6-Chloro-3-Indolyl Phosphate p-Toluidine Salt 6769-80-8
L-Alanine-4-Methyl-7-Coumarinylamide Trifluoroacetate 96594-10-4
4-Methylumbelliferyl-alpha-D-glucopyranoside hydrate, 99% 17833-43-1
(S)-(+)-gamma-(Trityloxymethyl)-gamma-butyrolactone, 96% 73968-62-4
(R)-(+)-alpha, alpha-Diphenyl-2-pyrrolidinemethanol, 98% 22348-32-9
(R)-(+)-2-Hydroxy-1,2,2-triphenylethyl acetate, 99% 95061-47-5
(S)-(-)-2-Hydroxy-1,2,2-triphenylethyl acetate, 99% 95061-51-1
(-)-Bis[(S)-1-phenylethyl]amine hydrochloride, 99% 40648-92-8
1-Butanol, reagent ACS, 99.4% 71-36-3
(4S,5R)-(-)-4-Methyl-5-phenyl-2-oxazolidinone, 99% 16251-45-9
1-Bromobutane, 99+% 109-65-9
(4R,5S)-(+)-4-Methyl-5-phenyl-2-oxazolidinone, 99% 77943-39-6
(S)-??5-Hydroxymethyl-??5-butyrolactone, 97% 32780-06-6
(R)-(-)-O-ACETYLMANDELIC ACID, 99% 51019-43-3
N-Isopropylethylenediamine, 98% 19522-67-9
Ammonium Acetate 631-61-8
(1R,2R)-trans-1,2-Cyclohexanediol, 98% 1072-86-2
1-Chlorobutane, Sequenation Grade 109-69-3
(1S,2S)-trans-1,2-Cyclohexanediol, 98% 57794-08-8
Normal-Butylamine, P.A. 109-73-9
Decane, 99+% 124-18-5
Ethyl Chlorothiolformate, 97+% 2941-64-2
Triisopropylnaphthalenesulfonic Acid Sodium Salt (pract), 90% 1323-19-9
n-Ethylmaleimide, 99+% 128-53-0
(+)-Bis[(R)-1-phenylethyl]amine hydrochloride, 99% 82398-30-9
(R)-(+)-N-Benzyl-1-phenylethylamine hydrochloride, 99% 128593-66-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net