Search   
MSDS 
:
 Ethyl Chlorothiolformate, 97+%
CAS 
:
 2941-64-2
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2941-64-2 |Ethyl Chlorothiolformate | >97 | 220-928-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+ C
Risk Phrases: 10 22 26 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful if swallowed. Very toxic by inhalation. Causes
burns.Moisture sensitive.Corrosive.Lachrymator (substance which
increases the flow of tears).

Potential Health Effects
Eye:
Causes eye burns. Produces irritation, characterized by a burning
sensation, redness, tearing, inflammation, and possible corneal
injury. Lachrymator (substance which increases the flow of tears).
May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause irritation and dermatitis. May cause
cyanosis of the extremities. May cause skin rash (in milder cases),
and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. May
cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Causes gastrointestinal tract burns. May cause perforation
of the digestive tract. Ingestion of large amounts may cause CNS
depression. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. Vapors may cause dizziness or suffocation.
May cause systemic effects. May cause burning sensation, coughing,
wheezing, laryngitis, shortness of breath, headache, nausea, and
vomiting. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
soap and water for at least 15 minutes while removing contaminated
clothing and shoes. Wash clothing before reuse. Destroy contaminated
shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air
immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT get water inside
containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Avoid
contact with heat, sparks and flame. Do not ingest or inhale. Do not
allow contact with water. Discard contaminated shoes. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose empty
containers to heat, sparks or open flames. Keep from contact with
moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry place. Keep container closed when not
in use. Store in a tightly closed container. Flammables-area. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Appearance: colourless - amber
Odor: stench
pH: Not available.
Vapor Pressure: 8.3 mm Hg @ 21 deg C
Viscosity: 3 cps @ 20 deg C
Boiling Point: 132 deg C
Freezing/Melting Point: -60 deg C
Autoignition Temperature: Not available.
Flash Point: 30 deg C ( 86.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Decomposes.
Specific Gravity/Density: 1.195
Molecular Formula: C3H5ClOS
Molecular Weight: 124.5474

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable, however, may violently decompose at temperatures above
125C.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2941-64-2: FG3855000
LD50/LC50:
CAS# 2941-64-2: Inhalation, rat: LC50 = 210 mg/m3/4H.
Carcinogenicity:
Ethyl Chlorothiolformate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ETHYL CHLOROTHIOFORMATE
Hazard Class: 8
UN Number: 2826
Packing Group: II
IMO
Shipping Name: ETHYL CHLOROTHIOFORMATE
Hazard Class: 8
UN Number: 2826
Packing Group: II
RID/ADR
Shipping Name: ETHYL CHLOROTHIOFORMATE
Dangerous Goods Code: 8(64B)
UN Number: 2826

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+ C
Risk Phrases:
R 10 Flammable.
R 22 Harmful if swallowed.
R 26 Very toxic by inhalation.
R 34 Causes burns.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 2941-64-2: No information available.
United Kingdom Occupational Exposure Limits

Canada
CAS# 2941-64-2 is listed on Canada's NDSL List.
CAS# 2941-64-2 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 2941-64-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #2 Date: 8/02/2000

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ninhydrin, reagent ACS 485-47-2
p-Nitrophenyl-alpha-D-Maltoside Hydrate, 99% 17400-77-0
Molybdenum(VI) oxide 1313-27-5
4-Nitrophenyl-alpha-D-Galactopyranoside. 7493-95-0
4-Methylumbelliferylphosphate disodium salt trihydrate, 99% 22919-26-2
4-Methylumbelliferyl palmitate, 99% 17695-48-6
Sodium cyanoborodeuteride, 98 atom % d 25895-62-9
Tetrabromo-O-Sulfobenzoic Acid Cyclic Anhydride, 95% 68460-01-5
4-Methylumbelliferyl-beta-D-glucopyranoside, 99% 18997-57-4
Sodium phosphate, monobasic monohydrate, reagent ACS (crystals) 7558-80-7
Methyl-alpha-D-galacatopyranoside, 98+% 3396-99-4
Morpholine, Reagent ACS, 99+% (Titr.) 110-91-8
N-Acetyl-L-Cysteine, 98% 616-91-1
N-Amyl Acetate, P.A. 628-63-7
1-Pentanol, 99% 71-41-0
(2-Hydroxyethyl)triphenylphosphonium chloride, 98% 23250-03-5
3-Indoxyl sulfate potassium salt 2642-37-7
Indoxyl-beta-D-glucuronide cyclohexylammonium salt 35804-66-1
n-Butyl acetate, spectrophotometric grade, 99+% 123-86-4
alpha-D-Galactose 1-phosphate dipotassium salt pentahydrate 19046-60-7
Glycine-7-amido-4-methylcoumarin hydrobromide 113728-13-5
N-Acetyl-L-tyrosine ethyl ester monohydrate, 99% 840-97-1
5-Bromo-6-Chloro-3-Indolyl-Beta-D-Galactopyranoside 93863-88-8
5-Bromo-4-Chloro-3-Indolyl-Beta-D-Glucuronide Cyclohexylammonium Salt 18656-96-7
5-Bromo-6-Chloro-3-Indolyl Phosphate p-Toluidine Salt 6769-80-8
L-Alanine-4-Methyl-7-Coumarinylamide Trifluoroacetate 96594-10-4
4-Methylumbelliferyl-alpha-D-glucopyranoside hydrate, 99% 17833-43-1
(S)-(+)-gamma-(Trityloxymethyl)-gamma-butyrolactone, 96% 73968-62-4
(R)-(+)-alpha, alpha-Diphenyl-2-pyrrolidinemethanol, 98% 22348-32-9
(R)-(+)-2-Hydroxy-1,2,2-triphenylethyl acetate, 99% 95061-47-5
(S)-(-)-2-Hydroxy-1,2,2-triphenylethyl acetate, 99% 95061-51-1
(-)-Bis[(S)-1-phenylethyl]amine hydrochloride, 99% 40648-92-8
1-Butanol, reagent ACS, 99.4% 71-36-3
(4S,5R)-(-)-4-Methyl-5-phenyl-2-oxazolidinone, 99% 16251-45-9
1-Bromobutane, 99+% 109-65-9
(4R,5S)-(+)-4-Methyl-5-phenyl-2-oxazolidinone, 99% 77943-39-6
(S)-??5-Hydroxymethyl-??5-butyrolactone, 97% 32780-06-6
(R)-(-)-O-ACETYLMANDELIC ACID, 99% 51019-43-3
N-Isopropylethylenediamine, 98% 19522-67-9
Ammonium Acetate 631-61-8
(1R,2R)-trans-1,2-Cyclohexanediol, 98% 1072-86-2
1-Chlorobutane, Sequenation Grade 109-69-3
(1S,2S)-trans-1,2-Cyclohexanediol, 98% 57794-08-8
Normal-Butylamine, P.A. 109-73-9
Decane, 99+% 124-18-5
Ethyl Chlorothiolformate, 97+% 2941-64-2
Triisopropylnaphthalenesulfonic Acid Sodium Salt (pract), 90% 1323-19-9
n-Ethylmaleimide, 99+% 128-53-0
(+)-Bis[(R)-1-phenylethyl]amine hydrochloride, 99% 82398-30-9
(R)-(+)-N-Benzyl-1-phenylethylamine hydrochloride, 99% 128593-66-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net