Search   
MSDS 
:
 4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt,
CAS 
:
 129-96-4
SYNONYMS 
:
 1,8-Dihydroxynaphthalene-3,6-disulfonic acid, disodium salt,     dihydrate; Chromotropic acid, disodium salt, dihydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 5808-22-0 |Chromotropic acid, disodium salt, dihy| >90 | unlisted |
| |drate | | |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid breathing dust.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 129-96-4:

CAS# 5808-22-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: off-white to gray-beige
Odor: practically odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: C10H6O8S2Na2.2H2O
Molecular Weight: 400.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat, excess light.
Incompatibilities with Other Materials:
Strong oxidizing agents, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, sodium oxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 129-96-4 unlisted.
CAS# 5808-22-0 unlisted.
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Chromotropic acid, disodium salt, anhydrous -
Not listed by ACGIH, IARC, or NTP.
Chromotropic acid, disodium salt, dihydrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 129-96-4: 1
CAS# 5808-22-0: No information available.
Canada
CAS# 129-96-4 is listed on Canada's DSL List.
CAS# 129-96-4 is not listed on Canada's Ingredient Disclosure List.
CAS# 5808-22-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 129-96-4 is listed on the TSCA inventory.
CAS# 5808-22-0 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/02/1997 Revision #5 Date: 12/13/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titanium(IV) tert-butoxide 119279-48-0
Basic Fuchsin, 88% (Titr.) 632-99-5
Aniline blue, w.s. (cert) 28631-66-5
Manganese(III)acetylacetonate 14284-89-0
Iron(II)acetylacetonate 14024-17-0
4-Bromobenzyl chloride, 98% 589-17-3
2,3-Dimethylanisole, 97% 2944-49-2
Ethyl 5-acetyloxyindole-2-carboxylate, Astra-Zeneca custom grade 0-01-1
Bromothymol Blue sodium salt, reagent ACS 34725-61-6
Bromocresol Green Sodium Salt, Reagent ACS, 95% (UV-Vis) 67763-24-0
Triethyleneglycol dibutylether 0-01-1
2-Cyano-3-morpholinoacrylamide, 98% 25229-97-4
Bromophenol Blue, Reagent ACS, 99% (UV-VIS) 115-39-9
Sodium Selenite, Anhydrous, 44-46% se 10102-18-8
Blue tetrazolium 1871-22-3
Bromocresol green, reagent acs, 98% (uv-vis) 76-60-8
2-Amino-4,5-Dichlorobenzothiazole, 97% 1849-71-4
4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, 129-96-4
Dimethyl (2-oxo-4-phenylbutyl)phosphonate, tech. , 85% 41162-19-0
Congo Red, High Purity Biological Stain 573-58-0
2,6-Dichloroindophenol sodium salt, hydrate, reagent ACS 620-45-1
Furaneol acetate, 98% 4166-20-5
Eosin Y, indicator grade 17372-87-1
p-Anisidine hydrochloride, 99% (titr.) 20265-97-8
2-(p-Tolyl)propionic acid 938-94-3
Tetrabutylammonium hydroxide, 1m solution in methanol 2052-49-5
Ethyl N-benzyl-3-oxo-4-piperidine-carboxylate hydrochloride, tech., 52763-21-0
Evans Blue 314-13-6
n-Tridecane 629-50-5
Giemsa Stain (Cert), 80% (UV-Vis) 51811-82-6
2-(4-Bromomethyl)phenylpropionic acid, 97% 111128-12-2
Hematoxylin (Pract), 85% (UV-Vis) 517-28-2
3-Chloro-4-methyl-7-hydroxycoumarin, 96% 6174-86-3
Indigo Carmine (Cert.) 860-22-0
1,8-Dihydroxy-4,5-dinitroanthracene-9,10-dione, 97% 81-55-0
Methyl Red Sodium Salt, Reagent ACS, 95% (UV-Vis) 845-10-3
Iron(III)sulfate pentahydrate, 97% 142906-29-4
Methyl Orange, High Purity Biological Stain 547-58-0
Acid Black 1 1064-48-8
Alpha-Ethyl-3-Hydroxy-4-Methylphenethyl-Amine Hydrochloride 29440-91-3
2-Amino-2'-Fluoro-5-Bromobenzophenone, 98% 0-00-1
(1-Aminobutyl)phosphonic acid, 97% 13138-36-8
Neutral Red (cert) 553-24-2
Orange G (Cert) 1936-15-8
Orcein, certified, 95% (UV-VIS) 1400-62-0
3-Aminopropylphosphonic Acid, 97% 13138-33-5
1-(2-Pyridylazo)-2-naphthol, indicator grade 85-85-8
(1-Amino-1-phenylmethyl)phosphonic acid, 97% 18108-22-0
Basic fuchsin, 99% (uv-vis) 569-61-9
(1-Aminopentyl)phosphonic acid, 97% 13138-37-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net