**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 41162-19-0 |Dimethyl (2-oxo-4-phenylbutyl)phosphon| 85% | unlisted |
| |ate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove
contaminated clothing and shoes. Get medical aid if irritation
develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store in a cool, dry, well-ventilated area away from incompatible
substances.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 41162-19-0:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Clear liquid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 120-122 deg C @ 0.5mmg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C12H17O4P
Molecular Weight: 256.0904
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Not currently available.
Conditions to Avoid:
None reported.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Phosphine, carbon monoxide, oxides of phosphorus, carbon dioxide.
Hazardous Polymerization: Has not been reported
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 41162-19-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Dimethyl (2-oxo-4-phenylbutyl)phosphonate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 41162-19-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 41162-19-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 41162-19-0 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 1/11/2000 Revision #3 Date: 12/16/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Titanium(IV) tert-butoxide
| 119279-48-0 |
|
Basic Fuchsin, 88% (Titr.)
| 632-99-5 |
|
Aniline blue, w.s. (cert)
| 28631-66-5 |
|
Manganese(III)acetylacetonate
| 14284-89-0 |
|
Iron(II)acetylacetonate
| 14024-17-0 |
|
4-Bromobenzyl chloride, 98%
| 589-17-3 |
|
2,3-Dimethylanisole, 97%
| 2944-49-2 |
|
Ethyl 5-acetyloxyindole-2-carboxylate, Astra-Zeneca custom grade
| 0-01-1 |
|
Bromothymol Blue sodium salt, reagent ACS
| 34725-61-6 |
|
Bromocresol Green Sodium Salt, Reagent ACS, 95% (UV-Vis)
| 67763-24-0 |
|
Triethyleneglycol dibutylether
| 0-01-1 |
|
2-Cyano-3-morpholinoacrylamide, 98%
| 25229-97-4 |
|
Bromophenol Blue, Reagent ACS, 99% (UV-VIS)
| 115-39-9 |
|
Sodium Selenite, Anhydrous, 44-46% se
| 10102-18-8 |
|
Blue tetrazolium
| 1871-22-3 |
|
Bromocresol green, reagent acs, 98% (uv-vis)
| 76-60-8 |
|
2-Amino-4,5-Dichlorobenzothiazole, 97%
| 1849-71-4 |
|
4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt,
| 129-96-4 |
|
Dimethyl (2-oxo-4-phenylbutyl)phosphonate, tech. , 85%
| 41162-19-0 |
|
Congo Red, High Purity Biological Stain
| 573-58-0 |
|
2,6-Dichloroindophenol sodium salt, hydrate, reagent ACS
| 620-45-1 |
|
Furaneol acetate, 98%
| 4166-20-5 |
|
Eosin Y, indicator grade
| 17372-87-1 |
|
p-Anisidine hydrochloride, 99% (titr.)
| 20265-97-8 |
|
2-(p-Tolyl)propionic acid
| 938-94-3 |
|
Tetrabutylammonium hydroxide, 1m solution in methanol
| 2052-49-5 |
|
Ethyl N-benzyl-3-oxo-4-piperidine-carboxylate hydrochloride, tech.,
| 52763-21-0 |
|
Evans Blue
| 314-13-6 |
|
n-Tridecane
| 629-50-5 |
|
Giemsa Stain (Cert), 80% (UV-Vis)
| 51811-82-6 |
|
2-(4-Bromomethyl)phenylpropionic acid, 97%
| 111128-12-2 |
|
Hematoxylin (Pract), 85% (UV-Vis)
| 517-28-2 |
|
3-Chloro-4-methyl-7-hydroxycoumarin, 96%
| 6174-86-3 |
|
Indigo Carmine (Cert.)
| 860-22-0 |
|
1,8-Dihydroxy-4,5-dinitroanthracene-9,10-dione, 97%
| 81-55-0 |
|
Methyl Red Sodium Salt, Reagent ACS, 95% (UV-Vis)
| 845-10-3 |
|
Iron(III)sulfate pentahydrate, 97%
| 142906-29-4 |
|
Methyl Orange, High Purity Biological Stain
| 547-58-0 |
|
Acid Black 1
| 1064-48-8 |
|
Alpha-Ethyl-3-Hydroxy-4-Methylphenethyl-Amine Hydrochloride
| 29440-91-3 |
|
2-Amino-2'-Fluoro-5-Bromobenzophenone, 98%
| 0-00-1 |
|
(1-Aminobutyl)phosphonic acid, 97%
| 13138-36-8 |
|
Neutral Red (cert)
| 553-24-2 |
|
Orange G (Cert)
| 1936-15-8 |
|
Orcein, certified, 95% (UV-VIS)
| 1400-62-0 |
|
3-Aminopropylphosphonic Acid, 97%
| 13138-33-5 |
|
1-(2-Pyridylazo)-2-naphthol, indicator grade
| 85-85-8 |
|
(1-Amino-1-phenylmethyl)phosphonic acid, 97%
| 18108-22-0 |
|
Basic fuchsin, 99% (uv-vis)
| 569-61-9 |
|
(1-Aminopentyl)phosphonic acid, 97%
| 13138-37-9 |
|
|