Search   
MSDS 
:
 Bromocresol Green Sodium Salt, Reagent ACS, 95% (UV-Vis)
CAS 
:
 67763-24-0
SYNONYMS 
:
 4,4'-(3H-1,2-Benzoxathiol-3-Yliden)Bis(2,6-Dibromo-3-Methylphenol     S,S-Dioxide Monodosium Salt.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 67763-24-0 |Bromocresol Green Sodium Salt | 95 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Dust may cause mechanical irritation. This product contains an
anionic dye. Similar dyes have not caused injury to the cornea or
conjunctiva in documented exposure cases with human or rabbit eyes.
Skin:
May cause skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing
before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use extinguishing media appropriate to the
surrounding fire. Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin
and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 67763-24-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Not applicable.
Freezing/Melting Point: decomposes
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 230 deg C
Solubility in water: soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: C21H13Br4O5SNa
Molecular Weight: 719.7538

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 67763-24-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Bromocresol Green Sodium Salt -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 67763-24-0: No information available.
Canada
CAS# 67763-24-0 is listed on Canada's NDSL List.
CAS# 67763-24-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67763-24-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/01/1998 Revision #6 Date: 2/09/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Titanium(IV) tert-butoxide 119279-48-0
Basic Fuchsin, 88% (Titr.) 632-99-5
Aniline blue, w.s. (cert) 28631-66-5
Manganese(III)acetylacetonate 14284-89-0
Iron(II)acetylacetonate 14024-17-0
4-Bromobenzyl chloride, 98% 589-17-3
2,3-Dimethylanisole, 97% 2944-49-2
Ethyl 5-acetyloxyindole-2-carboxylate, Astra-Zeneca custom grade 0-01-1
Bromothymol Blue sodium salt, reagent ACS 34725-61-6
Bromocresol Green Sodium Salt, Reagent ACS, 95% (UV-Vis) 67763-24-0
Triethyleneglycol dibutylether 0-01-1
2-Cyano-3-morpholinoacrylamide, 98% 25229-97-4
Bromophenol Blue, Reagent ACS, 99% (UV-VIS) 115-39-9
Sodium Selenite, Anhydrous, 44-46% se 10102-18-8
Blue tetrazolium 1871-22-3
Bromocresol green, reagent acs, 98% (uv-vis) 76-60-8
2-Amino-4,5-Dichlorobenzothiazole, 97% 1849-71-4
4,5-Dihydroxynaphthalene-2,7-Disulfonic Acid, Disodium Salt, 129-96-4
Dimethyl (2-oxo-4-phenylbutyl)phosphonate, tech. , 85% 41162-19-0
Congo Red, High Purity Biological Stain 573-58-0
2,6-Dichloroindophenol sodium salt, hydrate, reagent ACS 620-45-1
Furaneol acetate, 98% 4166-20-5
Eosin Y, indicator grade 17372-87-1
p-Anisidine hydrochloride, 99% (titr.) 20265-97-8
2-(p-Tolyl)propionic acid 938-94-3
Tetrabutylammonium hydroxide, 1m solution in methanol 2052-49-5
Ethyl N-benzyl-3-oxo-4-piperidine-carboxylate hydrochloride, tech., 52763-21-0
Evans Blue 314-13-6
n-Tridecane 629-50-5
Giemsa Stain (Cert), 80% (UV-Vis) 51811-82-6
2-(4-Bromomethyl)phenylpropionic acid, 97% 111128-12-2
Hematoxylin (Pract), 85% (UV-Vis) 517-28-2
3-Chloro-4-methyl-7-hydroxycoumarin, 96% 6174-86-3
Indigo Carmine (Cert.) 860-22-0
1,8-Dihydroxy-4,5-dinitroanthracene-9,10-dione, 97% 81-55-0
Methyl Red Sodium Salt, Reagent ACS, 95% (UV-Vis) 845-10-3
Iron(III)sulfate pentahydrate, 97% 142906-29-4
Methyl Orange, High Purity Biological Stain 547-58-0
Acid Black 1 1064-48-8
Alpha-Ethyl-3-Hydroxy-4-Methylphenethyl-Amine Hydrochloride 29440-91-3
2-Amino-2'-Fluoro-5-Bromobenzophenone, 98% 0-00-1
(1-Aminobutyl)phosphonic acid, 97% 13138-36-8
Neutral Red (cert) 553-24-2
Orange G (Cert) 1936-15-8
Orcein, certified, 95% (UV-VIS) 1400-62-0
3-Aminopropylphosphonic Acid, 97% 13138-33-5
1-(2-Pyridylazo)-2-naphthol, indicator grade 85-85-8
(1-Amino-1-phenylmethyl)phosphonic acid, 97% 18108-22-0
Basic fuchsin, 99% (uv-vis) 569-61-9
(1-Aminopentyl)phosphonic acid, 97% 13138-37-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net