Search   
MSDS 
:
 Alizarin Red S (cert), 90% (uv-vis)
CAS 
:
 130-22-3
SYNONYMS 
:
 C.I. 58005;     9,10-Dihydro-3,4-dihydroxy-9,10-dioxo-2-anthracenesulfonic acid;     sodium salt; Mordant Red 3; Sodium alizarinesulfonate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 130-22-3 |Alizarin Red S | 90 | 204-981-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. This product contains an anionic dye.
Similar dyes have not caused injury to the cornea or conjunctiva in
documented exposure cases with human or rabbit eyes.
Skin:
May cause skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Dusts at sufficient concentrations can form
explosive mixtures with air.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with skin and eyes. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 130-22-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not applicable.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: moderately soluble
Specific Gravity/Density:
Molecular Formula: C14H7NaO7S
Molecular Weight: 342.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 130-22-3: CB1095300
LD50/LC50:
Not available.
Carcinogenicity:
Alizarin Red S -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 130-22-3: No information available.
Canada
CAS# 130-22-3 is listed on Canada's DSL List.
CAS# 130-22-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 130-22-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/21/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Diiodo-4-Nitrophenol, 99% 305-85-1
Benzo-18-Crown-6, 97%(TLC) 14098-24-9
Xylan, ex avena 9014-63-5
2,4-Diaminotoluene, 98% 95-80-7
2-Methyl-3-(3,4-Methylenedioxyphenyl) Propanal, 98+% 1205-17-0
Isobutyl acetate, 98% 110-19-0
2-Hydroxy-4-methylquinoline, 97% 607-66-9
3-Phenoxyphenol 713-68-8
Potassium tert.-Butoxide, 95-99% 865-47-4
Benzyltriethylammonium tetrafluoroborate, 98+% 77794-93-5
4-Methoxybenzophenone, 97% 611-94-9
p-Butylbenzaldehyde diethyl acetal, 99% 83803-80-9
2-Chlorobenzoic Acid, 98% 118-91-2
1,3-Cyclohexanediol (Mixture of Cis and Trans), 98% 504-01-8
1-Chloro-2-Nitrobenzene, 99+% 88-73-3
2-Amino-4-Chloro-6-Methylpyrimidine 98% 5600-21-5
Dowex 1x8-200 ion-exchange resin 12627-85-9
Chromium(III) chloride, sublimed, anhydrous, 99% 10025-73-7
o-Methylphenethyl alcohol, 98% 19819-98-8
1-Chloroacetyl-3-Pyrazolidinone, 99% 0-00-1
Molecular Sieves, 3A, Powder, Max. Grain-Size 50 Micrometer 308080-99-1
Benzyl thiocyanate, 97% 3012-37-1
Bromochloromethane, 98% 74-97-5
Xanthopterin monohydrate 5979-01-1
2-Ethyl-1-Butanol, 98% 97-95-0
Oleyl alcohol, tech., 70% (gc) 143-28-2
alpha,alpha,alpha,2-Tetrachloro-6-fluorotoluene, 98% 84473-83-6
bis(4-Diethylaminodithiobenzil)nickel, laser grade, 99% (uv-vis) 51449-18-4
4-Nitrotoluene, 99% 99-99-0
2-Cyanopyridine, 99% 100-70-9
N-Carbobenzyloxy-L-Aspartic Acid, 98% 1152-61-0
Alizarin Red S (cert), 90% (uv-vis) 130-22-3
4-Chloroaniline, 99% (Titr.) 106-47-8
Methyl-2-methyl-3-furancarboxylate, 99% 6141-58-8
Ethyl Red Iodide, 98% 634-21-9
Hafnium chloride, 99%, -80 mesh 13499-05-3
Trans-2-Cyano-1-Cyclohexanol, 99+% 63301-31-5
3,3-Dimethoxy-Propanenitrile, 97% 57597-62-3
Scandium atomic absorption standard solution, 1 mg/ml Sc in 2% HNO3 7440-20-2
2-Vinylquinoline, 99% (Titr.) 772-03-2
4-Cumylphenol, 99% 599-64-4
2-Chlorobenzyl Bromide, 98% 611-17-6
Ethyl bis(ethylthio)acetate, 99% 20461-95-4
Tetrapentylammonium Iodide, 99% (Titr.) 2498-20-6
4-Ethyl-3-Thiosemicarbazide, 97% 13431-34-0
3',5'-Dimethoxy-4'-Hydroxyacetophenone 97% 2478-38-8
4,5-Dimethyl-2-isobutylthiazole, 98% 53498-32-1
1,1-Diphenyl-2-propanol, 98% 29338-49-6
Fast Violet B Salt, Purified 14726-28-4
2-Acetamido-3,4,6-tri-o-acetyl-2-deoxy-bet ha-d-glucopyranosyl azide, 6205-69-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net