Search   
MSDS 
:
 Ethyl Red Iodide, 98%
CAS 
:
 634-21-9
SYNONYMS 
:
 None known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 634-21-9 |Quinolinium,1-ethyl-2-(1-ethyl-4(1h)-q| 98 | 211-205-1 |
| |uinolinylidene)methyl, | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.Light
sensitive.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse. Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid. Get medical aid immediately. Do NOT induce vomiting. If
conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or
water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation. Store protected from light.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Use process
enclosure, local exhaust ventilation, or other engineering controls
to control airborne levels.
Exposure Limits
CAS# 634-21-9:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles. Wear appropriate
protective eyeglasses or chemical safety goggles as
described by OSHA's eye and face protection
regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin. Wear appropriate protective
clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: green
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 158-160 C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C23H23IN2
Molecular Weight: 454.34

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 634-21-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Quinolinium,1-ethyl-2-(1-ethyl-4(1h)-quinolinylidene)methyl, -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 634-21-9: No information available.
Canada
CAS# 634-21-9 is listed on Canada's DSL List.
CAS# 634-21-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 634-21-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,6-Diiodo-4-Nitrophenol, 99% 305-85-1
Benzo-18-Crown-6, 97%(TLC) 14098-24-9
Xylan, ex avena 9014-63-5
2,4-Diaminotoluene, 98% 95-80-7
2-Methyl-3-(3,4-Methylenedioxyphenyl) Propanal, 98+% 1205-17-0
Isobutyl acetate, 98% 110-19-0
2-Hydroxy-4-methylquinoline, 97% 607-66-9
3-Phenoxyphenol 713-68-8
Potassium tert.-Butoxide, 95-99% 865-47-4
Benzyltriethylammonium tetrafluoroborate, 98+% 77794-93-5
4-Methoxybenzophenone, 97% 611-94-9
p-Butylbenzaldehyde diethyl acetal, 99% 83803-80-9
2-Chlorobenzoic Acid, 98% 118-91-2
1,3-Cyclohexanediol (Mixture of Cis and Trans), 98% 504-01-8
1-Chloro-2-Nitrobenzene, 99+% 88-73-3
2-Amino-4-Chloro-6-Methylpyrimidine 98% 5600-21-5
Dowex 1x8-200 ion-exchange resin 12627-85-9
Chromium(III) chloride, sublimed, anhydrous, 99% 10025-73-7
o-Methylphenethyl alcohol, 98% 19819-98-8
1-Chloroacetyl-3-Pyrazolidinone, 99% 0-00-1
Molecular Sieves, 3A, Powder, Max. Grain-Size 50 Micrometer 308080-99-1
Benzyl thiocyanate, 97% 3012-37-1
Bromochloromethane, 98% 74-97-5
Xanthopterin monohydrate 5979-01-1
2-Ethyl-1-Butanol, 98% 97-95-0
Oleyl alcohol, tech., 70% (gc) 143-28-2
alpha,alpha,alpha,2-Tetrachloro-6-fluorotoluene, 98% 84473-83-6
bis(4-Diethylaminodithiobenzil)nickel, laser grade, 99% (uv-vis) 51449-18-4
4-Nitrotoluene, 99% 99-99-0
2-Cyanopyridine, 99% 100-70-9
N-Carbobenzyloxy-L-Aspartic Acid, 98% 1152-61-0
Alizarin Red S (cert), 90% (uv-vis) 130-22-3
4-Chloroaniline, 99% (Titr.) 106-47-8
Methyl-2-methyl-3-furancarboxylate, 99% 6141-58-8
Ethyl Red Iodide, 98% 634-21-9
Hafnium chloride, 99%, -80 mesh 13499-05-3
Trans-2-Cyano-1-Cyclohexanol, 99+% 63301-31-5
3,3-Dimethoxy-Propanenitrile, 97% 57597-62-3
Scandium atomic absorption standard solution, 1 mg/ml Sc in 2% HNO3 7440-20-2
2-Vinylquinoline, 99% (Titr.) 772-03-2
4-Cumylphenol, 99% 599-64-4
2-Chlorobenzyl Bromide, 98% 611-17-6
Ethyl bis(ethylthio)acetate, 99% 20461-95-4
Tetrapentylammonium Iodide, 99% (Titr.) 2498-20-6
4-Ethyl-3-Thiosemicarbazide, 97% 13431-34-0
3',5'-Dimethoxy-4'-Hydroxyacetophenone 97% 2478-38-8
4,5-Dimethyl-2-isobutylthiazole, 98% 53498-32-1
1,1-Diphenyl-2-propanol, 98% 29338-49-6
Fast Violet B Salt, Purified 14726-28-4
2-Acetamido-3,4,6-tri-o-acetyl-2-deoxy-bet ha-d-glucopyranosyl azide, 6205-69-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net