Search   
MSDS 
:
 Platinum (IV) Oxide, 83% Pt
CAS 
:
 1314-15-4
SYNONYMS 
:
 None
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1314-15-4 |Platinum (IV) Oxide | ca 100 | 215-223-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI O
Risk Phrases: 38 41 8

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to skin. Risk of serious damage to eyes. Contact with
combustible material may cause fire.The toxicological properties of
this material have not been fully investigated.

Potential Health Effects
Eye:
May cause conjunctivitis. May cause permanent corneal
opacification. Causes eye irritation and possible injury.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. May cause asthmatic attacks
due to allergic sensitization of the respiratory tract. The
toxicological properties of this substance have not been fully
investigated.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out
with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
with caution and in flooding amounts. Oxidizer. Greatly increases the
burning rate of combustible materials. Some oxidizers may react
explosively with hydrocarbons(fuel). May accelerate burning if
involved in a fire. Containers may explode when heated.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Contact professional fire-fighters immediately.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Remove all sources of ignition. Do not use combustible materials such
as paper towels to clean up spill.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid breathing dust,
vapor, mist, or gas. Avoid contact with clothing and other
combustible materials. Do not get on skin or in eyes. Avoid ingestion
and inhalation.
Storage:
Keep away from heat, sparks, and flame. Do not store near
combustible materials. Store in a cool, dry place. Store in a
tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1314-15-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: black
Odor: Not available.
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 450 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: Not available.
Molecular Formula: PtO2
Molecular Weight: 227.0788

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation,
combustible materials, reducing agents.
Incompatibilities with Other Materials:
Reducing agents, steel, aluminum.
Hazardous Decomposition Products:
No data available.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1314-15-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Platinum (IV) Oxide -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: OXIDIZING SOLID, CORROSIVE, N.O.S.*
Hazard Class: 5.1
UN Number: 3085
Packing Group: II
IMO
Shipping Name: OXIDIZING SOLID, CORROSIVE, N.O.S.
Hazard Class: 5.1
UN Number: 3085
Packing Group: II
RID/ADR
Shipping Name: OXIDIZING SOLID, CORROSIVE, N.O.S.
Hazard Class: 5.1
UN Number: 3085
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI O
Risk Phrases:
R 38 Irritating to skin.
R 41 Risk of serious damage to eyes.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 1314-15-4: No information available.
Canada
CAS# 1314-15-4 is listed on Canada's DSL List.
CAS# 1314-15-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1314-15-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/23/1999 Revision #4 Date: 3/03/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Chlorosulfonic acid, 97% 7790-94-5
alpha-Bromo-3,5-difluorotoluene, 98% 141776-91-2
Methyl 3-(trifluoromethyl)benzoate, 99% 2557-13-3
3,4-Difluorotoluene, 99% 2927-34-6
trans-2,4-Difluorocinnamic acid, 98% 94977-52-3
4-Fluoro-2-(trifluoromethyl)benzaldehyde, 98% 90176-80-0
2,4-Dichloro-5-fluorobenzoic acid, 99% 86522-89-6
3,5-Bis(Trifluoromethyl)Phenylacetonitrile , 98% 85068-32-2
3,5-Dichloro-4-fluorobenzotrifluoride, 98% 77227-81-7
2-Fluoro-4-methylaniline, 99% 452-80-2
2,6-Difluorotoluene, 99% 443-84-5
3-Fluoro-4-methoxybenzoic acid, 98% 403-20-3
DL-beta-Ethylphenethyl alcohol, 98% 2035-94-1
(S)-(+)-3-Hydroxytetrahydrofuran, 99% 86087-23-2
S-(+)-Ketamine hydrochloride, 99% 33795-24-3
1,3-Butadiene, 98% 106-99-0
Pentaethylenehexamine, Tech., 30.5% Nitrogen 4067-16-7
4-Nitrophenetole, 98% 100-29-8
4-Aminotoluene-2-sulfonic acid, 97% 118-88-7
Poly(vinyl propionate), solution in toluene, average MW ca. 34,000 108-88-3
Poly(Vinyltoluene), Mixed Isomers, Average MW ca. 80.000 (GPC) 9017-21-4
Poly(isodecyl methacrylate), solution in toluene, average M.W. ca. 108-88-3
Poly(Octadecyl Methacrylate), Solution in Toluene, Average MW ca. 25639-21-8
Polyethylenimine, 37 Wt% Aqueous Solution, 80% Ethoxylated 7732-18-5
3-(Trimethylsilyl)-Propionic Acid, Sodium Salt, 99+% 37013-20-0
Hexyl acrylate 2499-95-8
2,3,4-Trichloroanisole, 98% 54135-80-7
1,6-Hexanediol dimethacrylate 6606-59-3
N-Carbobenzyloxy-L-Glutamic Acid 1-Methyl Ester, 98% 5672-83-3
Cinchonidine, 98.5-101% (On The Dried Substance) 485-71-2
N-Carbobenzyloxy-L-Threonine Methyl Ester, 98% 57224-63-2
(+)-(4,6-O-Benzylidene)methyl-alpha-D-glucopyranoside, 97% 3162-96-7
N-(9-Fluorenylmethoxycarbonyl)-L-proline pentafluorophenyl ester, 97% 86060-90-4
5-Bromoindoxyl acetate, 98% 17357-14-1
Cis-Himic Anhydride, 97% 129-64-6
L-Proline benzyl ester hydrochloride, 98% 16652-71-4
Hexamminecobalt (III) Chloride, 99.999% 10534-89-1
4-Bromo-2-Methylaniline Hydrochloride, 98% 13194-70-2
Ferrocenecarboxaldehyde, 98% 12093-10-6
1,1'-Ferrocenedicarboxylic Acid, 96% 1293-87-4
Chromium hexacarbonyl, 99% 13007-92-6
Lanthanum oxide, 99.99% 1312-81-8
Platinum (IV) Oxide, 83% Pt 1314-15-4
Lead(II) oxide, 99.999% 1317-36-8
Arsenic (III) Oxide, 99.999% 1327-53-3
Tris(2,2,6,6-Tetramethyl-3,5-Heptanedionato)Gadolinium, 99.9% 14768-15-1
Phenylphosphinic acid, 99% 1779-48-2
Triethyl Phosphite, 98% 122-52-1
2,3,6-Trifluoroaniline, 99% 67815-56-9
Alpha,Alpha,Alpha,2-Tetrafluoro-p-Tolunitrile, 98% 146070-34-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net