Search   
MSDS 
:
 3,5-Bis(Trifluoromethyl)Phenylacetonitrile , 98%
CAS 
:
 85068-32-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 85068-32-2 |3,5-Bis(Trifluoromethyl)Phenylacetonit| 98 | 285-294-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. May cause irritation of the digestive
tract and possible burns.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 85068-32-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.4200g/cm3
Molecular Formula: C10H5F6N
Molecular Weight: 253.15

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 85068-32-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,5-Bis(Trifluoromethyl)Phenylacetonitrile -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: NITRILES, LIQUID, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
IMO
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing Group: III
RID/ADR
Shipping Name: NITRILES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 3276
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 85068-32-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 85068-32-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 85068-32-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Chlorosulfonic acid, 97% 7790-94-5
alpha-Bromo-3,5-difluorotoluene, 98% 141776-91-2
Methyl 3-(trifluoromethyl)benzoate, 99% 2557-13-3
3,4-Difluorotoluene, 99% 2927-34-6
trans-2,4-Difluorocinnamic acid, 98% 94977-52-3
4-Fluoro-2-(trifluoromethyl)benzaldehyde, 98% 90176-80-0
2,4-Dichloro-5-fluorobenzoic acid, 99% 86522-89-6
3,5-Bis(Trifluoromethyl)Phenylacetonitrile , 98% 85068-32-2
3,5-Dichloro-4-fluorobenzotrifluoride, 98% 77227-81-7
2-Fluoro-4-methylaniline, 99% 452-80-2
2,6-Difluorotoluene, 99% 443-84-5
3-Fluoro-4-methoxybenzoic acid, 98% 403-20-3
DL-beta-Ethylphenethyl alcohol, 98% 2035-94-1
(S)-(+)-3-Hydroxytetrahydrofuran, 99% 86087-23-2
S-(+)-Ketamine hydrochloride, 99% 33795-24-3
1,3-Butadiene, 98% 106-99-0
Pentaethylenehexamine, Tech., 30.5% Nitrogen 4067-16-7
4-Nitrophenetole, 98% 100-29-8
4-Aminotoluene-2-sulfonic acid, 97% 118-88-7
Poly(vinyl propionate), solution in toluene, average MW ca. 34,000 108-88-3
Poly(Vinyltoluene), Mixed Isomers, Average MW ca. 80.000 (GPC) 9017-21-4
Poly(isodecyl methacrylate), solution in toluene, average M.W. ca. 108-88-3
Poly(Octadecyl Methacrylate), Solution in Toluene, Average MW ca. 25639-21-8
Polyethylenimine, 37 Wt% Aqueous Solution, 80% Ethoxylated 7732-18-5
3-(Trimethylsilyl)-Propionic Acid, Sodium Salt, 99+% 37013-20-0
Hexyl acrylate 2499-95-8
2,3,4-Trichloroanisole, 98% 54135-80-7
1,6-Hexanediol dimethacrylate 6606-59-3
N-Carbobenzyloxy-L-Glutamic Acid 1-Methyl Ester, 98% 5672-83-3
Cinchonidine, 98.5-101% (On The Dried Substance) 485-71-2
N-Carbobenzyloxy-L-Threonine Methyl Ester, 98% 57224-63-2
(+)-(4,6-O-Benzylidene)methyl-alpha-D-glucopyranoside, 97% 3162-96-7
N-(9-Fluorenylmethoxycarbonyl)-L-proline pentafluorophenyl ester, 97% 86060-90-4
5-Bromoindoxyl acetate, 98% 17357-14-1
Cis-Himic Anhydride, 97% 129-64-6
L-Proline benzyl ester hydrochloride, 98% 16652-71-4
Hexamminecobalt (III) Chloride, 99.999% 10534-89-1
4-Bromo-2-Methylaniline Hydrochloride, 98% 13194-70-2
Ferrocenecarboxaldehyde, 98% 12093-10-6
1,1'-Ferrocenedicarboxylic Acid, 96% 1293-87-4
Chromium hexacarbonyl, 99% 13007-92-6
Lanthanum oxide, 99.99% 1312-81-8
Platinum (IV) Oxide, 83% Pt 1314-15-4
Lead(II) oxide, 99.999% 1317-36-8
Arsenic (III) Oxide, 99.999% 1327-53-3
Tris(2,2,6,6-Tetramethyl-3,5-Heptanedionato)Gadolinium, 99.9% 14768-15-1
Phenylphosphinic acid, 99% 1779-48-2
Triethyl Phosphite, 98% 122-52-1
2,3,6-Trifluoroaniline, 99% 67815-56-9
Alpha,Alpha,Alpha,2-Tetrafluoro-p-Tolunitrile, 98% 146070-34-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net