Search   
MSDS 
:
 Ethyl Acetate, 99.5+%, Spectrophotometric Grade
CAS 
:
 141-78-6
SYNONYMS 
:
 Acetic Acid Ethyl Ester; Acetic Ether; Acetidin; Acetoxyethane; Ethyl     Acetic Ester; Ethyl Ethanoate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 141-78-6 |Ethyl acetate | >99% | 205-500-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36 66 67

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes. Repeated exposure may cause
skin dryness or cracking. Vapors may cause drowsiness and dizziness.

Potential Health Effects
Eye:
Causes eye irritation. Vapors may cause eye irritation.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may
cause irritation and/or dermatitis.
Ingestion:
May cause irritation of the digestive tract. May cause liver and
kidney damage. Ingestion of large amounts may cause central nervous
depression. May cause headache, nausea, fatigue, and dizziness.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Inhalation of high concentrations may cause narcotic effects.
Chronic:
Chronic inhalation may cause effects similar to those of acute
inhalation. Chronic exposure may produce anemia, leukocytosis, cloudy
swelling, and fatty degeneration of the viscera.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Flammable Liquid. Can release vapors
that form explosive mixtures at temperatures above the flashpoint.
Use water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam. Water may be ineffective. For large fires, use water
spray, fog or alcohol-resistant foam. Do NOT use straight streams of
water. Cool containers with flooding quantities of water until well
after fire is out. DO NOT USE DRY CHEMICAL for fires involving
nitromethane or nitroethanes.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective
Equipment section. Remove all sources of ignition. Absorb spill using
an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as saw dust.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Avoid contact with heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29CFR
1910.134 or European Standard EN 149. Always use a
NIOSH or European Standard EN 149 approved respirator
when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Appearance: clear, colorless
Odor: sweet, fruity odor
pH: Not available.
Vapor Pressure: 100 mm Hg @27C
Viscosity: Not available.
Boiling Point: 77 deg C
Freezing/Melting Point: -83 deg C
Autoignition Temperature: 800 deg F ( 426.67 deg C)
Flash Point: 24 deg F ( -4.44 deg C)
Explosion Limits, lower: 2.2
Explosion Limits, upper: 9.0
Decomposition Temperature: Not available.
Solubility in water: Moderately soluble in water.
Specific Gravity/Density: 0.9 (Water=1)
Molecular Formula: C4H8O2
Molecular Weight: 88.0548

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, excess
heat.
Incompatibilities with Other Materials:
Chlorosulfonic acid, lithium aluminum hydride + 2-chloromethylfuran,
lithium tetrahydroaluminate, oleum, potassium t-butoxide. Substance
coming in contact with nitrates or strong acids/oxidizers/alkalies
may cause fire.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 141-78-6: AH5425000
LD50/LC50:
CAS# 141-78-6: Inhalation, mouse: LC50 = 45 gm/m3/2H; Inhalation,
rat: LC50 = 200 gm/m3; Oral, mouse: LD50 = 4100 mg/kg; Oral, rabbit:
LD50 = 4935 mg/kg; Oral, rat: LD50 = 5620 mg/kg; Skin, rabbit: LD50 =
>20 mL/kg.
Carcinogenicity:
Ethyl acetate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Fathead Minnow: 230mg/L; 96HDaphnid LC50=2500 mg/L/96H Golden
orfe LC50=270 mg/L/48H
Other
For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND
EXPOSURE DATA."

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ETHYL ACETATE
Hazard Class: 3
UN Number: 1173
Packing Group: II
IMO
Shipping Name: ETHYL ACETATE
Hazard Class: 3.2
UN Number: 1173
Packing Group: II
RID/ADR
Shipping Name: ETHYL ACETATE
Dangerous Goods Code: 3(3B)
UN Number: 1173

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36 Irritating to eyes.
R 66 Repeated exposure may cause skin dryness or
cracking.
R 67 Vapors may cause drowsiness and dizziness.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 141-78-6: 1
United Kingdom Occupational Exposure Limits
CAS# 141-78-6: OES-United Kingdom, TWA 400 ppm TWA; 1460 mg/m3 TWA

Canada
CAS# 141-78-6 is listed on Canada's DSL List.
CAS# 141-78-6 is listed on Canada's Ingredient Disclosure List.
Exposure Limits
CAS# 141-78-6: OEL-AUSTRALIA:TWA 400 ppm (1400 mg/m3)
OEL-BELGIUM:TWA 400 ppm (1440 mg/m3)
OEL-CZECHOSLOVAKIA:TWA 400 mg/m3;STEL 2000 mg/m3
OEL-DENMARK:TWA 300 ppm (1100 mg/m3)
OEL-FINLAND:TWA 300 ppm (1100 mg/m3);STEL 500 ppm (1800 mg/m3)
OEL-FRANCE:TWA 400 ppm (1400 mg/m3)
OEL-GERMANY:TWA 400 ppm (1400 mg/m3)
OEL-HUNGARY:TWA 400 mg/m3;STEL 1200 mg/m3
OEL-JAPAN:TWA 400 ppm (1400 mg/m3)
OEL-THE NETHERLANDS:TWA 400 ppm (1400 mg/m3) JAN9
OEL-THE PHILIPPINES:TWA 400 ppm (1400 mg/m3) JAN9
OEL-POLAND:TWA 200 ppm
OEL-RUSSIA:TWA 400 ppm;STEL 200 mg/m3
OEL-SWEDEN:TWA 150 ppm (500 mg/m3);STEL 300 ppm (1100 mg/m3)
OEL-SWITZERLAND:TWA 400 ppm (1400 mg/m3);STEL 800 ppm
OEL-TURKEY:TWA 400 ppm (1400 mg/m3)
OEL-UNITED KINGDOM:TWA 400 ppm (1400 mg/m3)
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 141-78-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/11/1997 Revision #5 Date: 5/14/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Creatinine, 99+% 60-27-5
Cholic acid sodium salt, 99% (Titr.) 361-09-1
2,2-Dichlorooctanoic Acid, 95% 102272-30-0
5-Methoxy-2-Nitrobenzoic Acid, 97% 1882-69-5
Ethyl Phenoxyacetate, 98% 2555-49-9
1-Naphthyl Butyrate, 98% 3121-70-8
2,5-Dimethyl-3,4-Diphenylcyclopentadienone Dimer, 97% 38883-84-0
2,6-Dichlorophenyl Isocyanate, 98% 39920-37-1
Ethyl Acetate, 99.5+%, Spectrophotometric Grade 141-78-6
Ethyl acetoacetate, p.a. 141-97-9
Ethylbenzene, 99% 100-41-4
Tetraethyl Orthosilicate 78-10-4
Sodium bisulfite, reagent ACS 7446-09-5
4'-Phenoxyacetophenone, 98% 5031-78-7
3-Amino-2-Methylbenzoic Acid, 97% 52130-17-3
1,2-Dibromoethane, p.a. 106-93-4
Benzyl Sulfide, 98% 538-74-9
2-Amino-4,5-Dimethoxybenzoic Acid, 98% 5653-40-7
2-Carboxycinnamic Acid, 98% 612-40-8
Benzyl sulphone, 98% 620-32-6
1-Naphthol-4-sulfonic acid sodium salt (pract) 6099-57-6
(2S)-Bornane-10,2-Sultam, 99+%, (99+% e.e.) 108448-77-7
1,2-Dichloroethane, spectrophotometric grade, 99+% 107-06-2
Holmium atomic absorption standard solution, 1 mg/ml Ho in 2% HNO3 7440-60-0
Ethylene glycol dimethyl ether, 99+% 110-71-4
Ethyl 2-cyano-3-methyl-2-butenoate, 98% 759-58-0
Ethylenediamine, p.a. 107-15-3
Octanesulfonyl Chloride, 98% 7795-95-1
Iodine Monobromide, 98% 7789-33-5
Ammonium Iron(III)-Citrate 1185-57-5
3-Methyl-2,4-pentanedione, 96% 815-57-6
Iron (III) Chloride, Anhydrous, Reagent (Powder), 96% (Titr.) 7705-08-0
1-Propylpyridinium bromide, 98% 873-71-2
2',5'-Dihydroxypropiophenone, 98% 938-46-5
Ammonium iron(III) oxalate trihydrate, 98% 13268-42-3
3-Bromocyclohexene, 95% 1521-51-3
2,4-Dibromo-2,4-Dimethyl-3-Pentanone, 98% 17346-16-6
1,2-Epoxy-7-octene, 97% 19600-63-6
Allyl Chloroacetate, 98% 2916-14-5
1-Allylimidazole, 97% 31410-01-2
2,4,6-Trichlorobenzoyl chloride, 98% 4136-95-2
Iron(III) chloride hexahydrate, pure, granulated, 99% 7705-08-0
Benzylurea, 98% 538-32-9
Benzyl Acetoacetate, 98% 5396-89-4
4-Amino-3-nitrophenol, 98% 610-81-1
Iron(III) nitrate nonahydrate, reagent ACS 7782-61-8
1-Aminopyridinium iodide, 98% 6295-87-0
Iron(II) chloride tetrahydrate, 99+% 13478-10-9
2,4-Dibromomesitylene, 98% 6942-99-0
5-Amino-2-chlorobenzoic acid, 97% 89-54-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net