Search   
MSDS 
:
 1-Naphthyl Butyrate, 98%
CAS 
:
 3121-70-8
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3121-70-8 |1-Naphthyl Butyrate | 98% | 221-500-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Aspiration may
lead to pulmonary edema. Inhalation at high concentrations may cause
CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and
collect in low or confined areas. Containers may explode when heated.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin,
and clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 3121-70-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless to yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 125 - 130 deg C @ 1.00mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 62 deg C ( 143.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: immiscible in water
Specific Gravity/Density: 1.0900g/cm3
Molecular Formula: C14H14O2
Molecular Weight: 214.0968

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Bases, oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3121-70-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Naphthyl Butyrate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3121-70-8: No information available.
Canada
CAS# 3121-70-8 is listed on Canada's NDSL List.
CAS# 3121-70-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3121-70-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/18/1998 Revision #4 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Creatinine, 99+% 60-27-5
Cholic acid sodium salt, 99% (Titr.) 361-09-1
2,2-Dichlorooctanoic Acid, 95% 102272-30-0
5-Methoxy-2-Nitrobenzoic Acid, 97% 1882-69-5
Ethyl Phenoxyacetate, 98% 2555-49-9
1-Naphthyl Butyrate, 98% 3121-70-8
2,5-Dimethyl-3,4-Diphenylcyclopentadienone Dimer, 97% 38883-84-0
2,6-Dichlorophenyl Isocyanate, 98% 39920-37-1
Ethyl Acetate, 99.5+%, Spectrophotometric Grade 141-78-6
Ethyl acetoacetate, p.a. 141-97-9
Ethylbenzene, 99% 100-41-4
Tetraethyl Orthosilicate 78-10-4
Sodium bisulfite, reagent ACS 7446-09-5
4'-Phenoxyacetophenone, 98% 5031-78-7
3-Amino-2-Methylbenzoic Acid, 97% 52130-17-3
1,2-Dibromoethane, p.a. 106-93-4
Benzyl Sulfide, 98% 538-74-9
2-Amino-4,5-Dimethoxybenzoic Acid, 98% 5653-40-7
2-Carboxycinnamic Acid, 98% 612-40-8
Benzyl sulphone, 98% 620-32-6
1-Naphthol-4-sulfonic acid sodium salt (pract) 6099-57-6
(2S)-Bornane-10,2-Sultam, 99+%, (99+% e.e.) 108448-77-7
1,2-Dichloroethane, spectrophotometric grade, 99+% 107-06-2
Holmium atomic absorption standard solution, 1 mg/ml Ho in 2% HNO3 7440-60-0
Ethylene glycol dimethyl ether, 99+% 110-71-4
Ethyl 2-cyano-3-methyl-2-butenoate, 98% 759-58-0
Ethylenediamine, p.a. 107-15-3
Octanesulfonyl Chloride, 98% 7795-95-1
Iodine Monobromide, 98% 7789-33-5
Ammonium Iron(III)-Citrate 1185-57-5
3-Methyl-2,4-pentanedione, 96% 815-57-6
Iron (III) Chloride, Anhydrous, Reagent (Powder), 96% (Titr.) 7705-08-0
1-Propylpyridinium bromide, 98% 873-71-2
2',5'-Dihydroxypropiophenone, 98% 938-46-5
Ammonium iron(III) oxalate trihydrate, 98% 13268-42-3
3-Bromocyclohexene, 95% 1521-51-3
2,4-Dibromo-2,4-Dimethyl-3-Pentanone, 98% 17346-16-6
1,2-Epoxy-7-octene, 97% 19600-63-6
Allyl Chloroacetate, 98% 2916-14-5
1-Allylimidazole, 97% 31410-01-2
2,4,6-Trichlorobenzoyl chloride, 98% 4136-95-2
Iron(III) chloride hexahydrate, pure, granulated, 99% 7705-08-0
Benzylurea, 98% 538-32-9
Benzyl Acetoacetate, 98% 5396-89-4
4-Amino-3-nitrophenol, 98% 610-81-1
Iron(III) nitrate nonahydrate, reagent ACS 7782-61-8
1-Aminopyridinium iodide, 98% 6295-87-0
Iron(II) chloride tetrahydrate, 99+% 13478-10-9
2,4-Dibromomesitylene, 98% 6942-99-0
5-Amino-2-chlorobenzoic acid, 97% 89-54-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net