Search   
MSDS 
:
 3-Butyn-2-one
CAS 
:
 1423-60-5
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1423-60-5 |3-Butyn-2-one | >96 | 215-834-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI F
Risk Phrases: 11 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes, respiratory system and
skin.Lachrymator (substance which increases the flow of tears).

Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness,
tearing, inflammation, and possible corneal injury. Lachrymator
(substance which increases the flow of tears). May cause chemical
conjunctivitis and corneal damage.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion of large amounts may cause CNS depression.
Inhalation:
Causes respiratory tract irritation. Aspiration may lead to
pulmonary edema. Vapors may cause dizziness or suffocation. Can
produce delayed pulmonary edema. May cause burning sensation in the
chest.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid. Do
NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Use water spray to keep fire-exposed
containers cool. Water may be ineffective. Material is lighter than
water and a fire may be spread by the use of water. Vapors may be
heavier than air. They can spread along the ground and collect in
low or confined areas. Will be easily ignited by heat, sparks or
flame. Containers may explode if exposed to fire. Runoff from fire
control or dilution water may cause pollution.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. Water may be ineffective. Water may spread
fire. If water is the only media available, use in flooding amounts.
For large fires, use water spray, fog or alcohol-resistant foam. Do
NOT use straight streams of water. Cool containers with flooding
quantities of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Wash clothing before reuse. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose empty containers to heat,
sparks or open flames. Use only with adequate ventilation. Keep away
from heat, sparks and flame. Avoid breathing vapor or mist.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Flammables-area. Keep refrigerated. (Store below
4C/39F.)

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 1423-60-5:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear yellow - orange-brown
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 85 deg C @ 760 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: -1 deg C ( 30.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.8700 g/cm3
Molecular Formula: C4H4O
Molecular Weight: 68.06

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1423-60-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Butyn-2-one -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.*
Hazard Class: 3 (6.1)
UN Number: 1992
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3.2 (6.1)
UN Number: 1992
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, TOXIC, N.O.S.
Hazard Class: 3
UN Number: 1992
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI F
Risk Phrases:
R 11 Highly flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 1423-60-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1423-60-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1423-60-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #7 Date: 1/07/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Decyltrimethylammonium bromide,99% (Titr.) 2082-84-0
Phenyl 3-Hydroxy-2-Naphthoate, 98+% 7260-11-9
(n-Butylamino)acetonitrile, 98% 3010-04-6
2,6-Dichloro-4-nitroaniline, 95%(tlc) 99-30-9
Sodium Metal 7440-23-5
Monensin, Sodium Salt 22373-78-0
Sodium Acetate, Anhydrous 127-09-3
2,4-Dichlorophenylacetonitrile, 99+% 6306-60-1
Sodium Acetate Trihydrate 127-09-3
2-Methyl-2-Cyclopenten-1-One, 97% 1120-73-6
3-(Isopropylideneaminoamidino)-1-phenylthiourea 63467-30-1
m-Phenylene diacetate, 93% (GC) 108-58-7
2,4,6-Triisopropylbenzenesulfonyl Chloride , 97% 6553-96-4
7-Hydroxycoumarin, 99% 93-35-6
Sodium Ammonium Phosphate Tetrahydrate 7783-13-3
7-Ethoxy-6-methoxy-2,2-dimethylchromene, 99% 65383-73-5
Trans-2-Methylcyclopentanol, 97% 25144-04-1
N-Butyl Cyanoacetate, 99+% 5459-58-5
Sodium tetrafluoroborate, 98% 13755-29-8
DL-1-Amino-2-propanol, 99+% 78-96-6
1,1-Diethylurea 634-95-7
Sodium Azide 7732-18-5
Sodium Benzoate 532-32-1
Sodium Bicarbonate 144-55-8
Methylguanidine sulfate, 98% (titr.) 598-12-9
2,4,5-Trihydroxypyrimidine, 98% 496-76-4
(+)-2-Azabicyclo[2.2.1]Hept-5-en-3-One 98% (HPLC), >95% e.e. 130931-83-8
Sodium bisulfate monohydrate 7681-38-1
Nicotinamide-N-Oxide, 98% 1986-81-8
Sodium bisulfite 7446-09-5
Ethyl 4-chloro-2-methylthio-5-pyrimidine- carboxylate, 98% 5909-24-0
3,4-Dimethoxyphenylacetone, 97% 776-99-8
(2r,3r)-(-)-2,3-butanediol, 99+% e.e. 24347-58-8
Sodium tetraborate decahydrate 1303-96-4
1-Methyl-3-piperidinemethanol, 97% 7583-53-1
4-Chloro-2-Nitrobenzyl Alcohol, 98% 22996-18-5
3-Ethylrhodanine, 98+% (GC) 7648-01-3
Sodium borohydride, powder 16940-66-2
Sodium bromate 7789-38-0
DL-threo-3-Phenylserine hydrate, 99% 69-96-5
Ethyl ethynyl carbinol, 99% 4187-86-4
Sodium bromide 7647-15-6
3-Butyn-2-one 1423-60-5
Sodium Cacodylate Trihydrate 6131-99-3
Sodium carbonate 497-19-8
Sodium carbonate decahydrate 497-19-8
Sodium carbonate monohydrate 497-19-8
Acetyl-d3 chloride, 99+ atom % D 75-36-5
Strontium Cyclohexanebutyrate 62638-05-5
Guanosine 5'-triphosphate, disodium salt hydrate, 95+% (hplc) 56001-37-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net