**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6553-96-4 |2,4,6-Triisopropylbenzenesulfonyl Chlo| 97% | 229-479-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause cardiac disturbances. May cause central nervous
system effects. May cause systemic effects.
Inhalation:
Inhalation of high concentrations may cause central nervous system
effects characterized by nausea, headache, dizziness, unconsciousness
and coma. Causes chemical burns to the respiratory tract. Aspiration
may lead to pulmonary edema. May cause cardiac abnormalities. May
cause systemic effects.
Chronic:
Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Non-combustible, substance itself does not burn but may
decompose upon heating to produce irritating, corrosive and/or toxic
fumes. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. For small fires, use dry chemical, carbon
dioxide, or water spray. For large fires, use dry chemical, carbon
dioxide, alcohol-resistant foam, or water spray.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Use only in a well-ventilated area. Minimize dust generation and
accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Do not allow contact with water. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Corrosives area. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 6553-96-4:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white to light beige
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 92.00 - 94.00 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: decomposes
Specific Gravity/Density:
Molecular Formula: C15H23ClO2S
Molecular Weight: 302.85
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 6553-96-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,4,6-Triisopropylbenzenesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: II
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 6553-96-4: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6553-96-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6553-96-4 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Decyltrimethylammonium bromide,99% (Titr.)
| 2082-84-0 |
|
Phenyl 3-Hydroxy-2-Naphthoate, 98+%
| 7260-11-9 |
|
(n-Butylamino)acetonitrile, 98%
| 3010-04-6 |
|
2,6-Dichloro-4-nitroaniline, 95%(tlc)
| 99-30-9 |
|
Sodium Metal
| 7440-23-5 |
|
Monensin, Sodium Salt
| 22373-78-0 |
|
Sodium Acetate, Anhydrous
| 127-09-3 |
|
2,4-Dichlorophenylacetonitrile, 99+%
| 6306-60-1 |
|
Sodium Acetate Trihydrate
| 127-09-3 |
|
2-Methyl-2-Cyclopenten-1-One, 97%
| 1120-73-6 |
|
3-(Isopropylideneaminoamidino)-1-phenylthiourea
| 63467-30-1 |
|
m-Phenylene diacetate, 93% (GC)
| 108-58-7 |
|
2,4,6-Triisopropylbenzenesulfonyl Chloride , 97%
| 6553-96-4 |
|
7-Hydroxycoumarin, 99%
| 93-35-6 |
|
Sodium Ammonium Phosphate Tetrahydrate
| 7783-13-3 |
|
7-Ethoxy-6-methoxy-2,2-dimethylchromene, 99%
| 65383-73-5 |
|
Trans-2-Methylcyclopentanol, 97%
| 25144-04-1 |
|
N-Butyl Cyanoacetate, 99+%
| 5459-58-5 |
|
Sodium tetrafluoroborate, 98%
| 13755-29-8 |
|
DL-1-Amino-2-propanol, 99+%
| 78-96-6 |
|
1,1-Diethylurea
| 634-95-7 |
|
Sodium Azide
| 7732-18-5 |
|
Sodium Benzoate
| 532-32-1 |
|
Sodium Bicarbonate
| 144-55-8 |
|
Methylguanidine sulfate, 98% (titr.)
| 598-12-9 |
|
2,4,5-Trihydroxypyrimidine, 98%
| 496-76-4 |
|
(+)-2-Azabicyclo[2.2.1]Hept-5-en-3-One 98% (HPLC), >95% e.e.
| 130931-83-8 |
|
Sodium bisulfate monohydrate
| 7681-38-1 |
|
Nicotinamide-N-Oxide, 98%
| 1986-81-8 |
|
Sodium bisulfite
| 7446-09-5 |
|
Ethyl 4-chloro-2-methylthio-5-pyrimidine- carboxylate, 98%
| 5909-24-0 |
|
3,4-Dimethoxyphenylacetone, 97%
| 776-99-8 |
|
(2r,3r)-(-)-2,3-butanediol, 99+% e.e.
| 24347-58-8 |
|
Sodium tetraborate decahydrate
| 1303-96-4 |
|
1-Methyl-3-piperidinemethanol, 97%
| 7583-53-1 |
|
4-Chloro-2-Nitrobenzyl Alcohol, 98%
| 22996-18-5 |
|
3-Ethylrhodanine, 98+% (GC)
| 7648-01-3 |
|
Sodium borohydride, powder
| 16940-66-2 |
|
Sodium bromate
| 7789-38-0 |
|
DL-threo-3-Phenylserine hydrate, 99%
| 69-96-5 |
|
Ethyl ethynyl carbinol, 99%
| 4187-86-4 |
|
Sodium bromide
| 7647-15-6 |
|
3-Butyn-2-one
| 1423-60-5 |
|
Sodium Cacodylate Trihydrate
| 6131-99-3 |
|
Sodium carbonate
| 497-19-8 |
|
Sodium carbonate decahydrate
| 497-19-8 |
|
Sodium carbonate monohydrate
| 497-19-8 |
|
Acetyl-d3 chloride, 99+ atom % D
| 75-36-5 |
|
Strontium Cyclohexanebutyrate
| 62638-05-5 |
|
Guanosine 5'-triphosphate, disodium salt hydrate, 95+% (hplc)
| 56001-37-7 |
|
|