Search   
MSDS 
:
 Sodium bisulfate monohydrate
CAS 
:
 7681-38-1
SYNONYMS 
:
 Sodium hydrogen sulfate monohydrate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 10034-88-5 |Sodium bisulfate monohydrate | 97+ | unlisted |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: XI
Risk Phrases: 41

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Risk of serious damage to eyes.

Potential Health Effects
Eye:
Causes severe eye irritation and possible burns. Risk of serious
damage to eyes.
Skin:
Causes severe skin irritation and possible burns.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
digestive tract irritation with possible burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Inhalation may be fatal as a result of spasm,
inflammation, edema of the larynx and bronchi, chemical pneumonitis
and pulmonary edema.
Chronic:
Repeated exposure may cause erosion of teeth. Symptoms of exposure
may include burning sensation, coughing, wheezing, laryngitis,
shortness of breath, headache, nausea and vomiting.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Reacts with
most metals in the presence of moisture, liberating extremely
flammable hydrogen gas.
Extinguishing Media:
Use dry chemical to fight fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Keep container
tightly closed. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7681-38-1:

Malaysia: 5 mg/m3 TWA
CAS# 10034-88-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystals
Color: colorless
Odor: odorless
pH: 1.4 (0.1M solution)
Vapor Pressure: Not applicable.
Viscosity: Not applicable.
Boiling Point: Decomposes.
Freezing/Melting Point: 58 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: 2.103
Molecular Formula: NaHSO4.H2O
Molecular Weight: 138.08

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Hygroscopic: absorbs
moisture or water from the air.
Conditions to Avoid:
Dust generation, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, attacks metals in the presence
of moisture.
Hazardous Decomposition Products:
Oxides of sulfur.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7681-38-1: VZ1860000
CAS# 10034-88-5: VZ1870000
LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Sodium bisulfate anhydrous -
Not listed by ACGIH, IARC, or NTP.
Sodium bisulfate monohydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3260
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 24 Avoid contact with skin.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 39 Wear eye/face protection.
WGK (Water Danger/Protection)
CAS# 7681-38-1: 1
CAS# 10034-88-5: No information available.
Canada
CAS# 7681-38-1 is listed on Canada's DSL List.
CAS# 7681-38-1 is listed on Canada's Ingredient Disclosure List.
CAS# 10034-88-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7681-38-1 is listed on the TSCA inventory.
CAS# 10034-88-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
MSDS Creation Date: 9/30/1997 Revision #5 Date: 4/06/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Decyltrimethylammonium bromide,99% (Titr.) 2082-84-0
Phenyl 3-Hydroxy-2-Naphthoate, 98+% 7260-11-9
(n-Butylamino)acetonitrile, 98% 3010-04-6
2,6-Dichloro-4-nitroaniline, 95%(tlc) 99-30-9
Sodium Metal 7440-23-5
Monensin, Sodium Salt 22373-78-0
Sodium Acetate, Anhydrous 127-09-3
2,4-Dichlorophenylacetonitrile, 99+% 6306-60-1
Sodium Acetate Trihydrate 127-09-3
2-Methyl-2-Cyclopenten-1-One, 97% 1120-73-6
3-(Isopropylideneaminoamidino)-1-phenylthiourea 63467-30-1
m-Phenylene diacetate, 93% (GC) 108-58-7
2,4,6-Triisopropylbenzenesulfonyl Chloride , 97% 6553-96-4
7-Hydroxycoumarin, 99% 93-35-6
Sodium Ammonium Phosphate Tetrahydrate 7783-13-3
7-Ethoxy-6-methoxy-2,2-dimethylchromene, 99% 65383-73-5
Trans-2-Methylcyclopentanol, 97% 25144-04-1
N-Butyl Cyanoacetate, 99+% 5459-58-5
Sodium tetrafluoroborate, 98% 13755-29-8
DL-1-Amino-2-propanol, 99+% 78-96-6
1,1-Diethylurea 634-95-7
Sodium Azide 7732-18-5
Sodium Benzoate 532-32-1
Sodium Bicarbonate 144-55-8
Methylguanidine sulfate, 98% (titr.) 598-12-9
2,4,5-Trihydroxypyrimidine, 98% 496-76-4
(+)-2-Azabicyclo[2.2.1]Hept-5-en-3-One 98% (HPLC), >95% e.e. 130931-83-8
Sodium bisulfate monohydrate 7681-38-1
Nicotinamide-N-Oxide, 98% 1986-81-8
Sodium bisulfite 7446-09-5
Ethyl 4-chloro-2-methylthio-5-pyrimidine- carboxylate, 98% 5909-24-0
3,4-Dimethoxyphenylacetone, 97% 776-99-8
(2r,3r)-(-)-2,3-butanediol, 99+% e.e. 24347-58-8
Sodium tetraborate decahydrate 1303-96-4
1-Methyl-3-piperidinemethanol, 97% 7583-53-1
4-Chloro-2-Nitrobenzyl Alcohol, 98% 22996-18-5
3-Ethylrhodanine, 98+% (GC) 7648-01-3
Sodium borohydride, powder 16940-66-2
Sodium bromate 7789-38-0
DL-threo-3-Phenylserine hydrate, 99% 69-96-5
Ethyl ethynyl carbinol, 99% 4187-86-4
Sodium bromide 7647-15-6
3-Butyn-2-one 1423-60-5
Sodium Cacodylate Trihydrate 6131-99-3
Sodium carbonate 497-19-8
Sodium carbonate decahydrate 497-19-8
Sodium carbonate monohydrate 497-19-8
Acetyl-d3 chloride, 99+ atom % D 75-36-5
Strontium Cyclohexanebutyrate 62638-05-5
Guanosine 5'-triphosphate, disodium salt hydrate, 95+% (hplc) 56001-37-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net