Search   
MSDS 
:
 1-Hexadecylsulfonic acid, sodium salt, HPLC grade
CAS 
:
 15015-81-3
SYNONYMS 
:
 Sodium hexadecanesulfonate.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 15015-81-3 |1-Hexadecanesulfonic acid, sodium salt| 99 | 239-100-6 |
| |, anhydrous | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 15015-81-3:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white to off-white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density:
Molecular Formula: C16H33O3SNa
Molecular Weight: 328.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 15015-81-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Hexadecanesulfonic acid, sodium salt, anhydrous -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 7 Keep container tightly closed.
S 36/39 Wear suitable protective clothing and
eye/face protection.
WGK (Water Danger/Protection)
CAS# 15015-81-3: No information available.
Canada
CAS# 15015-81-3 is listed on Canada's NDSL List.
CAS# 15015-81-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 15015-81-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/08/1999 Revision #3 Date: 4/16/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
6-Aminonicotinic Acid, 98% 3167-49-5
Rhodamine 6g Perchlorate, Laser Grade, 99% (TLC) 13161-28-9
3-Thiophenemalonic acid, 98+% 21080-92-2
Poly(Sodium-P-Styrenesulfonate), Average M.W.100.000 25704-18-1
3-Cyclohexylpropionaldehyde, 99% 4361-28-8
Tripropylamine, 99+% 102-69-2
1,10-Decanediol, 95% (GC) 112-47-0
Cyclooctanol, 99% 696-71-9
l-(-)-Sorbose, 99% 87-79-6
6-Bromo-2-Naphthyl-Beta-D-Glucopyranoside 15548-61-5
1-Hexadecylsulfonic acid, sodium salt, HPLC grade 15015-81-3
3-Carbethoxy-4-Piperidone Hydrochloride 98% (TLC) 4644-61-5
1,3-Dimethylurea, 98% 96-31-1
Diethyl 1,4-Dihydro-2,4,6-Trimethyl- 3,5-Pyridinedicarboxylate, 99% 632-93-9
Dimethylthiocarbamoyl Chloride, 99% (Titr.) 16420-13-6
3,3',5,5'-Tetramethylbenzidine, 99+% 54827-17-7
3,5-Diamino-1,2,4-Triazole 98% 1455-77-2
2-(Trifluoromethyl)benzimidazole 312-73-2
(1R,2R)-(+)-1,2-Diphenyl-1,2-Ethane Diamine, 99% (99% e.e.) 29841-69-8
1-Methyl-7-Hydroxy-6-Methoxy-3,4-Dihydroisoquinoline, 99+% 4602-70-4
Amberlite IRC-50 Ion-Exchange Resin 9002-29-3
Tetrahexylammonium Iodide, 99% (Titr.) 2138-24-1
L(-)-methanesulfonylethyllactate 63696-99-1
Tetrafluoroterephthalonitrile, 97% 1835-49-0
2-Furoic acid hydrazide, 98% 3326-71-4
4-Cyclohexylaniline, 97% 6373-50-8
8-Formyl-7-methoxy-1,4-dioxa-8-azaspiro[4.5]decane, tech., 85%
(2-Hydroxybenzoyl)methylenetriphenylphosphorane, 98% 0-01-1
3-Acetyl-1-propanol, 96% 1071-73-4
4-Chlorobenzotrifluoride, 98% 98-56-6
p-Tolyl Isothiocyanate, 99% 622-59-3
Boron trifluoride - acetic acid complex, c a. 33% bf3 373-61-5
Titanium (IV) Oxide, 98.0 - 100.5% TiO2 13463-40-6
Ethylmercurithiosalicylic acid, sodium salt 54-64-8
1-Iodopentane, 97% (GC) 628-17-1
(4-Carboxybutyl)triphenylphosphonium bromide, 98% 17814-85-6
Dichloroacetyl Chloride, 97% 79-36-7
trans-Traumatic acid, 97% 6402-36-4
1,4-Pentadiene, 99% 591-93-5
2-Chloro-p-phenylenediamine dihydrochloride, 99% (uv-vis) 615-46-3
Calcium 2-ethylhexanoate 136-51-6
N-Hydroxysuccinimide, 98+% 6066-82-6
2,2-Diphenylpropylamine Hydrochloride, 95% 40691-66-5
Cerium atomic absorption standard solution 1 mg/ml Ce in 2% HNO3 7440-45-1
alpha-Pyridoin, 99% 1141-06-6
4,6-Dimethyl-2-Pyrone, 98% 675-09-2
Oleic acid, sodium salt, 65-90% oleic C18 143-19-1
(+/-)-Tetrahydropapaveroline Hydrobromide, 98% 4747-99-3
5-Bromo-2-fluorotoluene, 99% 51437-00-4
2-Methoxy-4-Methylphenol, 99% (GC) 93-51-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net