Search   
MSDS 
:
 4-Acetylbenzenesulfonyl Chloride
CAS 
:
 1788-10-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 1788-10-9 |4-Acetylbenzenesulfonyl Chloride | ca. 100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. Aspiration may
lead to pulmonary edema. May cause systemic effects. May cause
burning sensation, coughing, wheezing, laryngitis, shortness of
breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Containers may explode
when heated. Water hydrolyzes material liberating acidic gas which in
contact with metal surfaces can generate flammable and/or explosive
hydrogen gas. Runoff from fire control or dilution water may cause
pollution.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Do NOT
get water inside containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Do not breathe dust,
vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow
contact with water. Use only in a chemical fume hood. Discard
contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Corrosives area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 1788-10-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 81-85 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C8H7ClO3S
Molecular Weight: 218.5602

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, dust generation, moisture, excess heat,
strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, irritating and
toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 1788-10-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Acetylbenzenesulfonyl Chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1788-10-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1788-10-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1788-10-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 2/02/2000 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
6-Chloro-2-hexanone, 98% 10226-30-9
1,4-Dihydroxynaphthalene, 1:1 mixture with 1,4-napthoquinone 130-15-4
2-Amino-3-Bromo-5-Nitro-Benzonitrile, 98% 17601-94-4
N-(Hydroxymethyl)Benzamide, 98% 6282-02-6
2,4-Diaminobenzenesulfonic Acid, 97% 88-63-1
2-Amino-5-Methoxybenzenesulfonic Acid, 98% 13244-33-2
3-Amino-4-Methoxybenzenesulfonic Acid, 98% 98-42-0
Formononetin, 99% 485-72-3
n-Hexadecyl palmitate, 98% 540-10-3
4-Iodobenzyl Bromide, 97% 0-01-1
3,4-Dicyanoaniline 56765-79-8
Vinyltris(Trimethylsilyloxy)Silane, 95% 5356-84-3
Dl-2,3-Dimercapto-1-Propanesulfonic Acid, Sodium Salt, Monohydrate 4076-02-2
(2S)-4-(1,3-Dioxoisoindolin-2-yl)-2-Hydroxybutanoic Acid, 96% 48172-10-7
(S)-(-)-4-Amino-2-Hydroxybutyric Acid, 96% 40371-51-5
N-(2-Hydroxy-4-aminophenyl)-phthalimide // Agfa Germany special 117346-08-4
o-Acetyl-L-Carnitine Hydrochloride, 98% 5080-50-2
(+/-)-Verapamil.hydrochloride (USP) 152-11-4
D-(+)-Maltose monohydrate, 90%, 69-79-4
Methyl 3-Aminocrotonate, 97% 14205-39-1
2-(3-Chlorophenyl)ethylamine, 98% 13078-79-0
Vinylmethylbis(Trimethylsilyloxy)Silane, 95% 5356-85-4
4-Acetylbenzenesulfonyl Chloride 1788-10-9
omega-Undecylenyl alcohol 112-43-6
3-Chlorothiophene, 98% 17249-80-8
Trimethylsilyl Methacrylate, Stabilized, 97% 13688-56-7
DL-3-Hydroxybutyric Acid, Sodium Salt, 99% 306-31-0
2-Pentyn-1-ol, 95% 6261-22-9
o-Nitrophenyl isocyanate (pract) 3320-86-3
Trimethoxy(7-Octen-1-yl)Silane, 90% 52217-57-9
Benzylacetone 2550-26-7
Tetrakis(trimethylsilyloxy)silane, 98% 3555-47-3
Ethyltriethoxysilane, 97% 78-07-9
1,1-Cyclopropanedicarboxylic acid 598-10-7
2-(2-(Trichlorosilyl)ethyl)pyridine, 96% 17082-69-8
6-Nitro-4-sulfo-2,1-naphthoquinone diazide, 97% 63589-25-3
N-(Trimethylsilyl)Allylamine, 95% 10519-97-8
3-Amino-5-nitrobenzothiazole, 97% 84387-89-3
2-Keto-L-gulonic acid, 90% 526-98-7
2,5-Diamino-4,6-dihydroxypyrimidine hydrochloride, 98% 56830-58-1
5-Nitrouracil, P.A. 611-08-5
1-Hydroxy-7-Azabenzotriazole, 98% 39968-33-7
4-Amino-3-Nitrobenzenesulfonic Acid, 97% 616-84-2
2-Chloro-4-aminopyridine, 97% 14432-12-3
2,5,6-Trimethylbenzoxazole, 98% 19219-98-8
2,6-Dichloro-3-fluoroacetophenone, 97% 0-01-1
Methyl beta-dimethylaminoisobutyrate, 99% 10205-34-2
2-Cyano-3-methylpyridine, 98% 20970-75-6
Barbital 57-44-3
4,4'-Methylenebis-(2,6-diisopropylaniline) 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net