Search   
MSDS 
:
 Dl-2,3-Dimercapto-1-Propanesulfonic Acid, Sodium Salt, Monohydrate
CAS 
:
 4076-02-2
SYNONYMS 
:
 DMPS
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4076-02-2 |DI-2,3-Dimercapto-1-Propanesulfonic Ac| 95% | 223-796-3 |
| |id, Sodium Salt Monohydrate | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Air sensitive.The toxicological properties of this material have not
been fully investigated.

Potential Health Effects
Eye:
No information regarding eye irritation and other potential effects
was found.
Skin:
No information regarding skin irritation and other potential effects
was found.
Ingestion:
The toxicological properties of this substance have not been fully
investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Inhalation of dust may cause respiratory tract
irritation.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry,
closed container for disposal. Avoid generating dusty conditions.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4076-02-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: None reported.
pH: 5.0 0.5
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: @ 760.00mm Hg
Freezing/Melting Point: 229 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C3H7O3S3Na.H2O
Molecular Weight: 228.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Not available.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4076-02-2: TZ6420000
LD50/LC50:
Not available.
Carcinogenicity:
DI-2,3-Dimercapto-1-Propanesulfonic Acid, Sodium Salt Monohydrate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 4076-02-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 4076-02-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4076-02-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/11/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
6-Chloro-2-hexanone, 98% 10226-30-9
1,4-Dihydroxynaphthalene, 1:1 mixture with 1,4-napthoquinone 130-15-4
2-Amino-3-Bromo-5-Nitro-Benzonitrile, 98% 17601-94-4
N-(Hydroxymethyl)Benzamide, 98% 6282-02-6
2,4-Diaminobenzenesulfonic Acid, 97% 88-63-1
2-Amino-5-Methoxybenzenesulfonic Acid, 98% 13244-33-2
3-Amino-4-Methoxybenzenesulfonic Acid, 98% 98-42-0
Formononetin, 99% 485-72-3
n-Hexadecyl palmitate, 98% 540-10-3
4-Iodobenzyl Bromide, 97% 0-01-1
3,4-Dicyanoaniline 56765-79-8
Vinyltris(Trimethylsilyloxy)Silane, 95% 5356-84-3
Dl-2,3-Dimercapto-1-Propanesulfonic Acid, Sodium Salt, Monohydrate 4076-02-2
(2S)-4-(1,3-Dioxoisoindolin-2-yl)-2-Hydroxybutanoic Acid, 96% 48172-10-7
(S)-(-)-4-Amino-2-Hydroxybutyric Acid, 96% 40371-51-5
N-(2-Hydroxy-4-aminophenyl)-phthalimide // Agfa Germany special 117346-08-4
o-Acetyl-L-Carnitine Hydrochloride, 98% 5080-50-2
(+/-)-Verapamil.hydrochloride (USP) 152-11-4
D-(+)-Maltose monohydrate, 90%, 69-79-4
Methyl 3-Aminocrotonate, 97% 14205-39-1
2-(3-Chlorophenyl)ethylamine, 98% 13078-79-0
Vinylmethylbis(Trimethylsilyloxy)Silane, 95% 5356-85-4
4-Acetylbenzenesulfonyl Chloride 1788-10-9
omega-Undecylenyl alcohol 112-43-6
3-Chlorothiophene, 98% 17249-80-8
Trimethylsilyl Methacrylate, Stabilized, 97% 13688-56-7
DL-3-Hydroxybutyric Acid, Sodium Salt, 99% 306-31-0
2-Pentyn-1-ol, 95% 6261-22-9
o-Nitrophenyl isocyanate (pract) 3320-86-3
Trimethoxy(7-Octen-1-yl)Silane, 90% 52217-57-9
Benzylacetone 2550-26-7
Tetrakis(trimethylsilyloxy)silane, 98% 3555-47-3
Ethyltriethoxysilane, 97% 78-07-9
1,1-Cyclopropanedicarboxylic acid 598-10-7
2-(2-(Trichlorosilyl)ethyl)pyridine, 96% 17082-69-8
6-Nitro-4-sulfo-2,1-naphthoquinone diazide, 97% 63589-25-3
N-(Trimethylsilyl)Allylamine, 95% 10519-97-8
3-Amino-5-nitrobenzothiazole, 97% 84387-89-3
2-Keto-L-gulonic acid, 90% 526-98-7
2,5-Diamino-4,6-dihydroxypyrimidine hydrochloride, 98% 56830-58-1
5-Nitrouracil, P.A. 611-08-5
1-Hydroxy-7-Azabenzotriazole, 98% 39968-33-7
4-Amino-3-Nitrobenzenesulfonic Acid, 97% 616-84-2
2-Chloro-4-aminopyridine, 97% 14432-12-3
2,5,6-Trimethylbenzoxazole, 98% 19219-98-8
2,6-Dichloro-3-fluoroacetophenone, 97% 0-01-1
Methyl beta-dimethylaminoisobutyrate, 99% 10205-34-2
2-Cyano-3-methylpyridine, 98% 20970-75-6
Barbital 57-44-3
4,4'-Methylenebis-(2,6-diisopropylaniline) 0-01-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net